Question about Makita Drills

Open Question

Makita hr 2470 hammer drill still drills fine but when using it on hammer started rattling and stopped chisling then put it on drill worked fine been chisling all day got very hot .just stripped down gearbox cleaned grease out checked bearings all good and smooth no noise all parts look like new nothing broken can you help thanks steve

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 123 Answers

SOURCE: te70 hilti hammer drill

The TE-70 is permantly lubricated. You would only add lubricant if you took the tool apart. You can add a small amount of grease to the end of your bit occasionally before putting in the chuck. This keeps the chuck parts lubed.

Posted on Jul 23, 2010

rowdy45176
  • 2176 Answers

SOURCE: makita hammer drill hr 3000c has stopped

go to makitausa.com and you can download a parts schematic there, let me k now if you need more assistance.

Posted on Oct 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hammering drill HR,3000c not hammering??


position 323913-1 Makita HR3000C Rotary Hammer Parts

position 417016-2 are they both in good condition ?

Aug 23, 2015 | Drills

1 Answer

Hi, Makita hr 2450 stop hammering but drilling works fine?


check the position of the setting for the small lever for the drive box at the front of the drill section

Jul 11, 2015 | Makita Drills

1 Answer

Makita dril 18v stopped working


check switch it may have over heated and burned out

Oct 22, 2012 | Makita Tools 18V 1/2" Lxt Lithium - Ion...

1 Answer

Wiring diagrams for makita hammer drills


Go to http://www.makitatools.com/en-us/Modules/Home/Default.aspx, put your model number in the search box and the parts breakdown and owner's manual can be viewed or downloaded.

Jan 16, 2012 | Makita Drills

1 Answer

Makita hammer drill hr 3000c has stopped hammering need strip down diagram to locate part fault


go to makitausa.com and you can download a parts schematic there, let me k now if you need more assistance.

Aug 26, 2011 | Makita HR3000C Electric Rotary Hammer

1 Answer

My makita impact driver has lost power. it seems to be using the hammer much more and seems to be slipping. both the hammer and the andvil don't appear worn. the bushes are fine. what could be the problem?


This is more then likely caused by the plastic gears inside the drill wearing down. Makita may replace/repair under warranty depending on when you purchased the drill.

Mar 18, 2011 | Makita 18V LXT Lithium - Ion Cordless...

3 Answers

Makita HP1640 hammer drill dual mode - 2 hours


Exchanged Makita HP1640 hammer drill for a new one. The 2nd drill did the same thing in under an hour!! Will return for refund. Instructions say the Forward/Reverse switch must be in a full up or down position for the Hammer/Rotary switch to move; well, it is and the Hammer/Rotary switch still stops at a 1/2 way point between modes. Although I can still use the drill, instruction warnings say not to because it may potentially burn out the motor. I'll have to go with a different brand this 3rd time around. It seems to be a design flaw.

Oct 10, 2009 | Makita Drills

1 Answer

Why doesn't my HP 1501 Makita hammer drill work


The problem was the cord at the base of the drill. The wires were broken, cause by constant bending. After souldering the wires, the drill works perfectly.

Thanks.

Jul 28, 2009 | Drills

1 Answer

I have a makita hr2455x rotary hammer drill that won't hammer


you need to get that service,
the grease causes the hammering.
and probably too much pressure was applied
to it.

Mar 25, 2009 | Makita HR2455X 1" Rotary Hammer Drill

Not finding what you are looking for?
Drills Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Makita Drills Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

John Trevino

Level 3 Expert

1383 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Makita Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...