Question about Samsung CXJ1364 13 in. TV/VCR Combo

2 Answers

I can hear sound from vhs but cannot see picture. do not have original remote but can access menu

Posted by on

  • 1 more comment 
  • twilad45 Apr 04, 2011

    the vcr is built in to the t.v. why would i need to check rca cables

  • twilad45 Apr 04, 2011

    i have a samsung tv/vcr combo television. meaning the vcr is built in. i can hear audio but have no visual on the vcr. do not have original remote but can access menu.

  • twilad45 Apr 04, 2011

    thank u for actually reading my problem as first one did not. this answer makes sense to me. thank u

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 19,396 Answers

Hi.

It is not a matter of settings. If there is no video from internal VHS, and TV works, then the problem is likely a bad internal connection to the VHS unit. When problem is settings you get no audio and no video from VHS.

You can try resetting the TV by disconnecting the power cable for five minutes, but I am afraid that this will not fix the problem.

A technician must disassemble the TV. The connection between VHS and TV controller board. The test is done ensuring that there is continuity (reading impedance) on each single contact of the VHS wiring harness.

Parts for older TV models are not distributed anymore. The faulty part must be repaired rather than replaced.

Regards.

Ginko.

Posted on Apr 04, 2011

  • Ginko
    Ginko Apr 04, 2011

    Hi.

    You are welcome.

    All the best.

    Ginko.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,622 Answers

You have to check the audio cable. If your tv only has 2 plugs ins and your dvd/vcr has three, unplug the red one and plug in the other one (white or yellow) that should fix your problem

Recheck your your connection. make sure you have one plugged into the video output. (out to T.V) hope this helps

Posted on Apr 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why can't I see the picture when watching VHS movie?


Check the interconnection cable. Try a new one. Check whether proper source i selected with TV. Check whether both VHS and TV powered ON. Gopakumar Gopalan Google

Aug 09, 2014 | Zenith Televison & Video

1 Answer

HI I have just bought a Panasonic NV-FJ620 VCR and it doesn't have a remote - can I programme it without a remote? At the moment I can even get a picture. Thanks Nicola


You will have great diffculty. If you can't find the original remote get a good quality universal one. But have a look first for the original on somewhere like Curry's Parmaster website.

Oct 06, 2011 | Panasonic NV-FJ620 VHS/S-VHS playback VCR

1 Answer

DVD Player doesn't work on DRC6355N VCR/DVD Combo


With most dvd/vcr combo units there is separate wiring. When I use my emerson combo unit I have it wired that I have to be on different inputs on my tv to view a dvd and a vhs. On some units the vcr portion is wired via a regular cable line, while the dvd portion is wired with the yellow, red, and white component cable. Try inserting a dvd and scrolling through your tv inputs until you find the picture or check your wiring to ensure nothing has come loose. If that has no result you could try wiring it differently if possible to eliminate that as a possibility.

Jul 10, 2010 | RCA DRC6355N DVD Player/VCR

1 Answer

Resetting lock and accessing menu with universal remote


For these tvs you have to unplug them for three hours to reset them. When you are able to access the menu if the remote control is not allowing you to move up and down left and right usually channel up is up channel down is down volume - is left and volume + is right. If worse comes to worse you can get the original remote from Sharp for $42.50 +tax and shipping by calling 1.877.674.2832 or from replacementremotes.com for $39.65 at 336-377-2220. The remote can always be returned if having it does not fix your problem.

May 05, 2010 | Sharp 13VT-K150 13 in. Combo

2 Answers

I lost my remote control for my tv/vhs panasonic omnivision


how do you access the menu without the remote panasonic omnivision tv vcr combo

Mar 31, 2009 | Panasonic PV-C2010 20 in. TV/VCR Combo

2 Answers

Cant set clock or access menu using universal remote


Haven't found answer to that, but there is a remote contol specifically for your unit now on EBAY at http://cgi.ebay.com/SHARP-VCR-RRMCGO173AJSA-Remote-Control_W0QQitemZ350117240995QQcmdZViewItemQQptZLH_DefaultDomain_0?_trksid=p3286.m20.l1116. The whole thing is under $10 including shipping. If nothing else, copy the model # of the remote and you might be able to find it cheaper someplace else.

Dec 04, 2008 | Sharp VC-H973U VHS VCR

1 Answer

No Problems with my SLV-N55 except for one


This remote is still available from any Sony disatributor. It can be found using part number: 147728211 from Tritronicsinc.com for $38.95 plus shipping.

Dan

Aug 08, 2008 | Sony SLV-N55 VHS VCR

1 Answer

Orion VR213


Call the number on the unit to price an original remote.

Jul 23, 2008 | Orion VR213 VHS VCR

1 Answer

Orion D1050


need remote contro'

Feb 07, 2008 | Orion VR213 VHS VCR

1 Answer

Timer


You first must have the original remote, go into the menu, and go to timer settings. You cannot use most universal remotes to go into menu funtions. You can get an original replacement at http://remotes.com Good Luck

Aug 19, 2006 | GE VG2042 VHS VCR

Not finding what you are looking for?
Samsung CXJ1364 13 in. TV/VCR Combo Logo

Related Topics:

924 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74459 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...