Question about Pioneer Audio & Video Receivers

1 Answer

CDJ 800MK2 reports the following error code: E-8301

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It just works!

Posted on Aug 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i connect a subwoofer to my stero technics su-800mk2 amplifier


You would connect any non-specific subwoofer according to its needs:

passive = to an amplifier channel;

active (self-powered) = per its manual and the capabilities of the source.

Given the lack of a specific subwoofer facility on the SU-800, you need a sub that can be driven by full-range speaker level output. Its manual would describe the procedure. Keeping in mind that most active subs are pretty much the same speaker-level-connection-wise (if they allow it), you could find just about any manual and wit would get you running.

http://archiwumallegro.pl/technics_sua800_mk2_wysoki_model_krakow-998303435.html

Jul 06, 2011 | Audio & Video Receivers

1 Answer

Hello I own 2 cdj 800 mk3 which I use professionally every week for the past 2 years. Recently I am experiencing problems with the pitch control waivering up and down about 2 bpm. I have found this with...


It's possible that you can remedy the problem by cleaning the controls. Being as how they are analog controls and facing directly upward they get dust and dirt in them quite easily. Use a cleaner that is designed for slide controls, one with a silicone lubricant, not one that's straight alcohol as the control will get stiff and not move smoothly.
If cleaning does not do the trick then yes, you'll have to replace it.

Oct 14, 2008 | Pioneer Audio & Video Receivers

1 Answer

Pioneer CDJ-500S error 9103.


9103 error is a traverse assembly issue. Unfortunately, there is no easy fix for this. You will have to take it to a service center for repair. They will in turn replace the Traverse assembly, or find out why it's giving this error. If the traverse assembly is replaced, they will also have to calibrate the unit according to Pioneer specs.

- Davis
Digital Analog Therapy
www.repairnyc.com

Jul 15, 2008 | Pioneer Audio & Video Receivers

1 Answer

Fuse Replacement


Hi diamonddan11

I have given you direct instructions as to where the fuse is on your original post. The fuse is located inside the unit on the same printed circuit board as the mains power socket, right beside the main power switch.

regards
robotek

Jun 21, 2008 | Audio & Video Receivers

1 Answer

My pioneer cdj 500 doesn't open,makes a slight noise when the button is pressed and comes up with error code E91


If you know how to open the unit,it's good.If not and you trying to fix it,i have a tip when first opening a unit look for the screw hide under the label or in the rubber footings.When you open it half close it again,close open tecnic this is step by step,so you cannot forgot when it place and classified screw big and small so it's easy to get back.The main problemcannot be open.Under the button of switch to open there be a small switch there.A tacking switch clean that switch with the use of a lighter fluid or acontact cleaner and all button switches.Dirt can produce a scratching sound and error.When cleaning press the button hard so dirt comes out.That's all txt me the result.

Jun 13, 2008 | Pioneer Audio & Video Receivers

1 Answer

Lubrication for Pioneer CDJ1000 Pro CDJ Turntable Jog Wheel


You can use WD-40 if there is a control pot which the knob is attached to. If there is a small PC board with no pot, don't spray with oil.

May 01, 2008 | Audio & Video Receivers

2 Answers

Radio Code...please help me


Hi again... the best I have come up with so far is a list of codes to try that have worked for others with the same problem as you. go through them all, and if you still have no success, then get back to me here and I shall look further for you.

This worked on a 2004 with the CD/MP3 deck. Others have reported success with these codes

1. Turn on CD Player
2. Enter the following codes one at a time until one works:

2253, 3116, 3451, 2152, 4362, 4316
4316, 4513, 4362, 1156, 2145, 1156
6451, 6361, 5624, 5241, 3346, 1165
3241, 4524, 5436, 5813, 3265, 5624
2453, 3462, 3251, 5445, 8253, 1156
2346, 4853, 6645, 5253, 1325, 4136
3116, 3221, 2151, 5312, 2654, 4314
6234, 4356, 1415, 1435


Good luck

regards
Graeme

Mar 05, 2008 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio & Video Receivers Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Pioneer Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...