Question about Canon PIXMA iP1700 InkJet Photo Printer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: MP150 Error code 4 and 5
Don't use refill cartridges, because it will damage your printer someday. and will cost your parts as brand new. so better use the original ink.
TRY THIS STEPS...
Mp150 Reset Counter
Service mode operation procedures -
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
5 times Orange Destination setting See Destination setting
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection
IF THIS STEPS DOESN'T WORK, YOU NEED TO BRING THE UNIT TO YOUR NEAREST SERVICE CENTER...
Posted on Feb 11, 2008
Use a Q-Tip and some clean water to clean the contacts behind the cartridge in the printer and on the cartridge itself. Then use a pencil with a clean eraser to polish the contacts. Be careful not to touch the part where the ink comes out of the cartridge.
Also, are you using Canon ink or third party?
Posted on Jan 11, 2008
SOURCE: printer won't accept cartridge
i sure u buy wrong cartridge for your MP450...if u want higher quality, u should buy CL-51 cartridge for colour and CL-50 for black..
fyi, CL-52 can only suitable for IP6210D / IP6220D printer. u can see yourself at this link :
hope this help... ; )
Posted on May 26, 2009
do a temporary reset. u can found it how to do it.
temporary reset is a procedure before doing a permanen reset (usualy with resetter software)
temporary reset is bypass ur cartridge recognition
here it is :
1. turn off ur printer
2. pull off all cable that connect to printer (2 cable, usb and power cable)
3. press and hold the power button, then insert the power cable (still hold the power button)
4. while u still hold the power button, press the resume buton twice. the release them both.
5. because its a temporary reset. u must do it again if u lost electricity power.
met coba :D
Posted on Jun 03, 2009
Tips for a great answer:
May 07, 2011 | Canon PIXMA iP1700 InkJet Photo Printer
May 16, 2017 | Canon PIXMA iP1800 InkJet Printer
Jun 10, 2010 | Canon PIXMA iP1700 InkJet Photo Printer
Feb 19, 2010 | Canon PIXMA iP1700 InkJet Photo Printer
Nov 28, 2009 | Canon PIXMA MP210 Photo All-In-One Printer
Jun 21, 2009 | Canon PIXMA iP90 Mobile Printer
Jan 08, 2009 | Canon PIXMA MP150 All-In-One InkJet...
With the original chip now
attached to the compatible cartridge (you may need double sided tape to
get the chip to stick well to the cartridge), and with the cartridge
now in the printer, Press and hold the Reset/OK Button for 5 seconds to
reset the chips.
Oct 31, 2007 | Canon PIXMA iP3300 InkJet Photo Printer
Jan 24, 2014 | Canon PIXMA iP1700 InkJet Photo Printer
308 people viewed this question
Usually answered in minutes!