Question about Cycling

1 Answer

How do you remove the attachment for blow up balls?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Hello rm26,
The majority of bike pumps have a lever right behind where the attachments fit in. When lifted so it's in line with the ball-blow-up adapter, this locks the attachment in place. When pushed down so it points along the hose, that unlocks everything and will allow you to pull out the ball-fill needle, and put another adapter in, or use it directly on a bike/car tire. It's a simple fix, but fairly common system. If you've tried that, in rarer cases they'll screw counter-clockwise out, or can be unlocked by a gear, or twist-top knob on top of the pump.
Hope this helps you! -The Chicken

Posted on Apr 05, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Latitude. How can I replace control arm and ball joint assembly?


Lower you can do fairly easy. Upper, a bit tougher.For the upper you will need a spring compressor.

Mar 21, 2016 | 2011 Jeep Patriot

1 Answer

How to replace front ball joint


the ball joint is replaced as a lower control arm. You will need to remove the tire, remove the nut that attaches the ball joint to the knuckle, seperate the ball joint from the knuckel, remove the radius arm nut, remove the bolt that secures the lower control arm from the subframe, and then remove the control arm.

Sep 04, 2013 | 2001 Kia Rio

1 Answer

Water not draining


Remove the check valve ( the white plastic part the hose is attached to with the ball and clip) by gripping it firmly and rotating it counter clockwise.( Be prepared for water coming out) The blockage is usually in here or in the hose /drain itself. Blow through the hose to the drain just to make sure it's clear.

Does the motor run? When you removed the hose did water come out of the dishwasher?

Apr 21, 2011 | Whirlpool 24 in. DU1100XTP Built-in...

1 Answer

I have a problem removing the bottom ball joints on 2003 chevy trail blazer need step by step please.


remove steering knuckle with wheel hub and bearing attached ,remove lower ball joint flange with a chisel,remove the lower ball joint using a ball joint press you can rent the press from some local auto parts store or purchased from harbor freight for about 60 bucks.

Feb 25, 2011 | 2003 Chevrolet TrailBlazer

1 Answer

B77 Keurig coffee maker won't dispense coffee if k cup is in holder. Help?


I had the same problem with my Keurig coffee maker. The needle is clean, and no deposits. Above the needle is a check valve. This is a simple fix. Open the K-cup arm and look up, in front of the needle housing is two silverish screws. Remove them and lower the arm but don't lock. Slide the black top cover out to expose supply hose and check valve. Carefully cut the zip tie and remove hose from check valve. Remove the two scres holding the valve in place and drop it down and out. Blow into the end where hose attaches. You should be able to blow thru, with some resistance. If you can't, thats your problem. Take a paper clip and carefully bend and insert into end where hose attaches, pushing ball in valve down alittle. Blow into it again, you should be able to now. If not, keep trying, it will go. When done re-assemble and run a cup of water, with out cup to clean it. Hope this helps ya!

Dec 07, 2010 | Vacuums

2 Answers

How to replace headlights bulbs in a grand cherokee 2001


  1. Remove the jack screw attaching the top of the head lamp to the head lamp mounting module.
  2. Grasp the upper inboard and lower outboard corners of the head lamp and pull the head lamp outward.
  3. Remove the bad bulb socket from the head lamp module and remove bulb from socket.
  4. Install new bulb into socket and reinstall socket into head lamp module.
  5. Position the head lamp on the vehicle and align the ball studs with the sockets.
  6. Push the head lamp inward to secure the ball studs with the sockets.
  7. Install the jack screw attaching the top of head lamp to the head lamp mounting module.
Do not touch glass of halogen bulbs at the oil can cause the headlight to blow out

Nov 12, 2009 | 2001 Jeep Grand Cherokee

1 Answer

No water flow through the showerhead bracket


blow air through the part that attaches to the bracket and see if there is any air coming out if not you probably have a clog in the tube or the head.

Apr 26, 2009 | Water Pik Waterpik& Elements& Handheld...

1 Answer

Lower ball joint removal how to


  1. Remove the steering knuckle with wheel hub and bearing attached.
  2. Remove the lower ball joint flange with a chisel.
  3. Install J9519-E and J34874 to the lower ball joint.
  4. Remove the lower ball joint from the lower control arm using J9519-E and J34874


  1. Install the lower ball joint and J9519-E, J41435, and J45105-2 to the lower control arm.
  2. Install the lower ball joint to the lower control arm using J9519-E, J41435, and J45105-2.
  3. Remove J9519-E, J41435, and J45105-2 from the lower control arm
    1. Install J9519-E and J45105-1 to the lower ball joint.
    2. Flare the lower ball joint flange using J9519-E and J45105-1.
    3. Remove J9519-E and J45105-1 from the lower ball joint.
    4. Install the steering knuckle with wheel hub and bearing attached. Install the tire and wheel.
    1. Lower the vehicle.
    2. Check the front wheel alignment.
these jouints are pressed in and there is a flange that is flared this is what the tool numbers refer too.

Sep 12, 2008 | 2002 Chevrolet TrailBlazer

4 Answers

Front upper ball joint replacement


The dealer's answer (if you are interested).......

The ball joint is pressed into the upper control arm and has a tapered stud for attachment to the steering knuckle. The ball joint stud is attached and locked into the steering knuckle using a special nut. The ball joint is a sealed-for-life type and requires no maintenance. If the ball joint is defective it will require replacement of the entire upper control arm.

Sorry.

Jun 19, 2008 | 2002 Chrysler Sebring

Not finding what you are looking for?
Cycling Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cycling Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

kakima

Level 3 Expert

102366 Answers

John Egan
John Egan

Level 2 Expert

73 Answers

Are you a Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...