Question about Washing Machines
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: hwd1000 drying
More than likely your heating element is dead.You can get one at a hardware store.There not that dificult to replace.I could walk threw it with you on live chat.
Hope this helped. Let me know.Please rate.
For more help go to live chat.
Posted on Jan 30, 2009
This is usually a simple heating coil malfunction. The coil may have breaks in it causing it not to work. It could also have something to do with 1 of several heating sensors that may be broken, telling the dryer's heating coil that the dryer is too hot, in effect turning off the heating coil. If your dryer has a round lint filter in the rear of the drum, it was 1 of 2 models of Dependable care dryers produced in the 1970's. If this is the case, i supose it would be up to you whether you want to try and get it repaired or not. If you have one of the more recent models,,, the lint filter is directly behind the door, at the front of the drum. and in this case it would probably be a good idea to get it looked at it as Maytag is a relatively dependable brand.
Posted on Mar 13, 2009
Hi Jim, you issue could be caused by a couple either one of a of the following,
1) Draining problem, cant empty the water from the machine within the prescribed time limit - preventing the spin programme to commence. check pump filter is clear and waste water is pumping from the end of the waste hose, the hose itself could be blocked with limescale and detergent residue.
2) Unbalanced load, most machines wont spin 1 item, its a safety thing, if a machine spins with one heavy item it puts the drum out of balance resulting in excessive drum movement possibly damaging the inside of the machine and put indue stress on the bearings. Try putting it on a spin cycle with no clothes in
Unbalanced load detection can also be caused by a faulty motor tacho, this usaually positioned at the rear of the motor, this sends an electrical signal to the programmer telling when it is 'Safe' to spin. There also the posibility that the programmer is not reading the tacho signal or misinterpriting it.
Posted on May 20, 2009
SOURCE: prolem drying clothes
I just contacted Samsung Tech Support for my wash/dryer combo WD-J1255C.
The reply.."it is not a full dryer ...and it is not sold as a full drier.. and don't expect it to be completely dry". I queried why it is advertised as a dryer and got the same reply.
Its a great washer but why did I pay extra for the dryer combo?
Posted on May 23, 2009
Tips for a great answer:
Sep 15, 2014 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...
Aug 24, 2013 | Whirlpool Whirpool Energy Star Dishwasher...
Nov 20, 2010 | Dryers
May 11, 2010 | Maytag EPICz 6.7 Cu. Ft. 8-Cycle King-Size...
May 01, 2010 | Dryers
Dec 27, 2009 | Whirlpool Dryers
Nov 28, 2009 | Whirlpool Dryers
Jun 21, 2009 | Dryers
May 15, 2009 | Whirlpool Dryers
122 people viewed this question
Usually answered in minutes!