Question about HP Officejet 6500 Wireless All-in-One InkJet Printer

Open Question

My HP Officejet 6000 wireless printer is frozen. The magenta ink light is on but nothing else works. The carriage will not move when I open the top. I have tried to power it down with the button, but that doesn't work. I unplugged the unit for over 30 minutes and that doesn't work. The HP Toolbox tells me the "printer is not connected".

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: HP Officejet 7410 All-in-one No Power Light

Turn the printer upside down right underneath where the cartridge station is you will find a small white gear...sometime it may be covered with a blue rubber cover.
when you turn the gear ..the barrier in front of the cartridge will go down.
Then do a rest on the printer and then install it.

Posted on Jun 08, 2008

Ad
bandana_gyrl
  • 181 Answers

SOURCE: Hp Officejet 7310 All-in-one carriage

If the issue is with the carriage chute your printer has an extended warranty and will be replaced by hp if you call in. Please read this document and look at the photos in Step 1.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00304007&lc=en&dlc=en&cc=us&lang=en&rule=22243&product=391182

If not then this is not a user replaceable product and you are looking at paying to have it serviced by hp or replacing the unit altogether.

Posted on Jan 29, 2009

celibytes
  • 70 Answers

SOURCE: Power button is blinking and Carriage is stalled

there are two cartridge one is the ink cartridge which can be found on the left side of the printer (in front)and the other one is the head cartridge that can be found on the right side if you will open the printer cover that is the carriage check it if the flip cover is lock properly then try to reinsert the head cartridge..

Posted on Sep 10, 2009

Testimonial: "I LOVE U MAN!! TNX FOR THE HELP! I HOPE I CAN BRING YOU PIE! OR SUMTIN' TNX SO MUCH ^_^"

don_farr
  • 1011 Answers

SOURCE: Replacement instructions for ink cartridge carriage assembly

Please follow the link below to HP Web site. This will take you to the HP 7410 Setup Chart. The cartridge instructions you need begin in frame 10.

http://h10032.www1.hp.com/ctg/Manual/c00236206.pdf

Don

Posted on Oct 22, 2009

  • 3 Answers

SOURCE: hp 7410 all-in-one won't power on - the screen

Have a look at this site. It worked for me and apparantly for lots of other people.

The person who posted the site is my hero

http://callitout.com/quotes/index.php/kick-it-to-the-curb/68/printer-wont-boot-up-start-cycle/

Posted on Jan 08, 2011

Testimonial: "you ROCK shirleyhome!! THANK YOU!! And, yes, the person who posted this site is a saint! :)"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, the magenta ink won't work on my printer hp office jet pro k8600. I have replaced it with a new one and even though is shows that it's full on the ink levels it won't print it at all, I have tried all...


Materials needed: New empty syringe (big one) Gloves (to protect your hands fromink) Alcohol Paper tissue (to clean the excessink) Empty Plastic bottle (Here you putthe ink from the syringe) Important: Ensure that you have put new Magentaink cartridge to HP K8600. Ensure that the printhead arerecognized by the printer or no light alarms. Instruction: Press the Power button to turn onthe printer. Test print in microsoft excel with4 color black/yellow and cyan/magenta. If magenta only is missing means youhave clogged problem from the host. Wear your globes, prepare thematerials needed. Open the top cover. Press and hold the Resume buttonuntil the carriage moves to the left. CAUTION: Be careful not to proceed until the carriage is on the left sideof the printer. If the carriage does not move to the left automatically, turnthe printer off and back on and then try holding down the Resume button again.The printhead can be damaged if the carriage is not all the way to the left forinstallation. Lift the printhead latch. Lift the handle of a printhead anduse it to pull the printhead magenta/cyan out of its slot. Put printhead in thepaper tissue upward. Your printer are still ON becarefull not to touch the flex copper circuit. Get your syringe, use this to pullthe ink from the nozzle cap ( see link picture) After the done the syringe method,Insert the printhead magenta/cyan into its color-coded slot. Press down firmly on the printheaduntil it snaps into place. Pull the printhead latch all theway forward, and then press down until the latch engages. Close the cover. The printer should align theprintheads automatically in a few minutes, printing an alignment page. Print a test with magenta coloronly, If it does not print, try to change the Printhead. This is the only solution I foundin my HP k8600 printing problem.christan_11_1.jpg

Jan 14, 2011 | HP OfficeJet Pro K8600 Printer

1 Answer

I have a hp printer officejet J5780 All imn one.


I have found this model has a bad buildup of black ink in the right carriage bay chamber. With the printer on, open the carriage access lid and pull the power cord before the cartridge carriage can move all the way to the right side. Then gently push back the cartridge holder on the right if it's in your view, so you can see if there is a collection of black ink. The tri-color cartridge has a preventive bracket that doesn't seem to build as much as the black one. Anyway, once you've cleared any dripped ink cones or globs, plug the printer back in, turn it on, and if you get the Carriage Jam error one more time, press OK, and it should work well if that was the block on the carriage movement. I hope this helps you to get printing again.

May 04, 2010 | HP Officejet J5780 All-In-One InkJet...

1 Answer

How do I change ink cartridge on my HP inkjet 6500 wireless printer.


Hi, When using refilled print cartridges, the Estimated Ink level and the Printer Status Window may indicate that the print cartridge is out of ink. Either continue to use the print cartridge until print quality degrades, or replace the print cartridge with a new HP print cartridge.

The methods of replacing the ink cartridge of the printer follows here:
Open the printer cover
The printer ink carriage will automatically goes to center
Once the carriage is in the center, the printer was ready to replace the ink.
Pull the down slowly the ink tank off the carriage..
Remember the place where the color/black position.
Remove each tank one at a time, and replace the ink with a new one.
Close the printer cover and it now ready to printer.

HP Deskjet 6500 Series Printer - Setting Definitions

Hope the instructions provided helps.

Dec 03, 2009 | HP Officejet 6500 Wireless All-in-One...

1 Answer

How do you change the ink carterage in an hp officejet 5610v all-in-one?


Hello !

To change the ink cartridge(s) in your printer,

Open the print-carriage access door by pulling it forward.

The print carriage moves to the far right side of the HP All-in-One.

Remove the cartridge.

Take the new cartridge from the package.

Remove the strip from the cartridge without touching the metal back.

Insert the cartridge.

Hope this helps.

Oct 04, 2009 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Power button is blinking and Carriage is stalled


there are two cartridge one is the ink cartridge which can be found on the left side of the printer (in front)and the other one is the head cartridge that can be found on the right side if you will open the printer cover that is the carriage check it if the flip cover is lock properly then try to reinsert the head cartridge..

Sep 10, 2009 | HP OfficeJet Pro K5400dn OfficeJet Pro...

1 Answer

I am receiving an error message on my HP Officejet 6110 printer screen that prevents the printer from functioning. The message is "Open door. Clear carriage jam and then press enter." I've tried opening...


yes, that is a carriage jam and not paper, the grinding is from the clean station that gets blocked with dried ink and cant move. you need to open the printer and clean the ink off of the clean station so it can clean properly and not cause a carriage jam.

Jun 29, 2009 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

HP officejet v40


If its clicking something is jamming the carriage or the timing could be off.

It should be looked at by a technician to get it adjusted properly.

Jun 22, 2008 | HP OfficeJet V40 All-In-One InkJet Printer

1 Answer

HP Officejet 5510 - Replacing Ink Cartridge


this should work for all 5500 hp printers i hope this helps you out richard from chicago i just noticed you have the wrong cartage you need hp 57 color that will make all the difference :-) HP Officejet 5500 series All-in-One model Black cartridge Color cartridge HP Officejet 5505 HP 56 HP 57 HP Officejet 5508 HP 56 HP 57 HP Officejet 5515 HP 56 HP 57 HP Officejet 5510, HP Officejet 5510xi, HP Officejet 5510v HP 56 HP 57 HP Officejet 5600 series Replacing the print cartridges
  1. Turn on the HP Officejet, and lift open the print-carriage access door. The print carriage will move into the access area. Figure 1: Opening the print-carriage access door c00034766.jpg
  2. After the carriage stops moving, push down on the top of the print cartridge to release it, and then pull it toward you out of the slot. Figure 2: Removing the print cartridge c00034767.jpg NOTE: It is normal to see ink buildup in the print cartridge slots.
  3. Remove the new print cartridge from the packaging and gently remove the plastic tape by using the pink pull tab. CAUTION: Do not touch the copper contacts or ink nozzles. Install the cartridge immediately upon removing the tape to prevent ink from drying in the nozzles. Figure 3: Removing the plastic tape c00034768.jpg
  4. Push the new print cartridge into the appropriate slot at a slight angle, until it clicks into place. CAUTION: Do not attempt to push the cartridge straight into the slot. It must slide in at a slight angle. Figure 4: Inserting the print cartridge c00034769.jpg
  5. Close the print-carriage access door.
Aligning the print cartridges The HP Officejet will prompt you to align the print cartridges every time you install a new print cartridge to assure high-quality output.
  1. When the message displays, press OK . The HP Officejet will print an alignment page.
  2. Place the alignment page face down on the left front corner of the glass with the top of the page facing the left side.
  3. Press OK . The HP Officejet will align the print cartridges and display Alignment Complete .

Mar 18, 2008 | HP Officejet 5510 All-In-One Thermal...

1 Answer

Hp officejet r40 cartridge carriage blocked


Not sure about r40's, but look here about the leaking ink solution for G85's and DJ900's: http://www.fixyourownprinter.com/forums/inkjet/22399

There is a guy named BERT who is a master a fixing HP units, and his email can be found in the above mentioned forum note.

Dec 31, 2007 | HP OfficeJet r40 InkJet Printer

Not finding what you are looking for?
HP Officejet 6500 Wireless All-in-One InkJet Printer Logo

470 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...