Question about HP Laserjet Cp2025n Printer
All the book says is that one of the motors had a problem.
Power it off for at least 30 seconds. Power back on.
Make sure you are not using a surge protector.
Put the power cord directly into the wall outlet.
I just checked the manual for another printer and the 59.f0
could be the ITB. Make sure that it is seated correctly. If you have
a spare install it and see if problem goes away.
Posted on Apr 04, 2011
Hp color Laserjet 5550 59.C0 printer error message
Posted on Mar 18, 2013
Hp laser jet pro 59.F0 error
Posted on Feb 24, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you haven't taken your printer apart, somehow the "cams" in the developer drive assembly worked their way out of alignment.
Somebody trained is going to have to align and calibrate the main drive assembly.
Posted on Mar 05, 2011
SOURCE: How can I solve the
The error says that "The transfer rollers in the ETB are not
If replacing the ETB(electronic transfer belt) doesn't fix the problem, your printer is going to need a technician. Problem could be poor seating of the cables on the ETB motor or the 'transfer-roller separation solenoid or the DC Controller.
It could be a bad ETB motor or solenoid or DC Controller or high voltage power supply.
This isn't something that is going to be fixed by email.
I hope you have a service contract for your printer.
Posted on Feb 18, 2011
SOURCE: HP Color LaserJet CP352dn 59.fo
The primary transfer-alienation motor has experienced an error.
1. Check to ensure the ITB is installed correctly.
2. Run a sensor test to verify that the primary transfer disengagement roller is functioning. If not replace the sensor (SR17).
3. Run the primary transfer drive test in actuator drive mode. If not functioning replace the ITB (Intermediate transfer belt).
Posted on Jul 27, 2011
Tips for a great answer:
Jan 04, 2017 | HP Office Equipment & Supplies
Sep 08, 2016 | HP Color LaserJet Professional CP5225dn...
Apr 20, 2016 | HP Office Equipment & Supplies
May 26, 2015 | HP Office Equipment & Supplies
Jul 10, 2014 | HP LaserJet Pro 100 color MFP M175nw -...
Jul 27, 2011 | HP Laserjet Cp2025n Printer
Mar 04, 2011 | HP LaserJet 3600n Printer
Jun 09, 2009 | HP Color LaserJet 5550hdn Printer
7,460 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: