Question about Panasonic Home Theater System System

2 Answers

Have a Panasonic SA-BT100 which now will not power up, there is no red standby light, have swapped the power lead to check the fuse and still no power - any suggestions ????

Posted by Anonymous on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,799 Answers

These unit have an internal fuse. This will mean removing the power lead, opening the case and replacing the fuse. Probably best to have a professional do it. Sorry, Shouldn't be expensive though.

Posted on Apr 04, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 95 Answers

Power board malfunction, replace it. available power board avsystemparts com or direct contact by mail.

Posted on Dec 21, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic SA-BT100 standby light on, but will not turn on.


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/

Sep 08, 2012 | Audio Players & Recorders

3 Answers

Panasonic TH-42PX60B


have you already service the main unit, or you an initial check on the parts of the TV..

kindly post back the TV model/maker..

Thank you

May 18, 2008 | Panasonic TH37PX60 37 in. Plasma...

1 Answer

Samsung tv to panasonic sa bt100 home theatre


it is the problem with the hdmi cable .. dont buy cheaper cables it may damage after some time

Aug 24, 2012 | Audio Players & Recorders

1 Answer

My Panasonic sa-ak770 will not come out of standby mode


Check to make sure there are no shorts in the speaker wiring, if okay remove speaker wires from back, press power if it comes out of standby the wires or speakers are the problem, if there is no change the protection circuit is not functioning or the audio output ic's have a short.

Jun 09, 2012 | Panasonic Audio Players & Recorders

1 Answer

Panasonic tx26lxd80 flashing red light


I see so many here with no sound/nopicture issues:

ISSUES:

1. IF sound main fuse/s are good.
2. If no power or standby check main fuse, standby power supply and any signsof damage you can see---burnt parts etc.
3. almost all these sets the troubleshooting involves checking voltages on the main power board to narrow down theproblem.
4. Be safe and if you do not know what you are doing don't open the set.

Answers to issues:

1. RE:fuses---if a blown fuse is found get a good replacement(not the genericones like Radio Shack). Many fuses are special even aside from amperage--Don'tput a higher rated amperage fuse in the set for any reason.

2. RE: power supply in set: if total dead aside from main fuse the set uses astandby power supply that runs 7/24 and a main supply (some are combined andsome not.

Here aside from checking fuses you want to examine all the filter caps on thepower/standby to see if any are puffed up or buldged up in some fashion--Iattach a photo of a good one---top should be silver metal and PERFECTLY flatand have no brown material coming out on top or bottom.

What happens in the standby area is they use caps with too low a voltage rating(saves money) which causes them to fail in a year or two---the standby runs7/24 and the heat dries out the caps and they fail.

3. Trouble shooting consists of the above and then at some point you have to buyand try a board to see if it fixes it or not.

4. Safety first--no TV set is worth getting injured or even killed over.If set is opened at least look for puffed up and bad caps like in thisphoto.5_18_2012_1_59_49_pm.jpg

May 17, 2012 | Panasonic TX26LXD80 26 LCD TV

1 Answer

My sa-bt100 doesn't send audio trhugh the hdmi. I want to hear it through the TV not the external speakers. How do I configure it? Thanks


What TV audio is available to the SC-BT100 that a) isn't available to the TV directly; and b) would sound better on the TV?

I'd look on my cable box for the basic analog audio out and send it to the TV for those times you just want to watch the news without hi-fi. I'd also send the best Video (HDMI) directly to the TV because passing it through the receiver just adds cabling and opportunity for malfunction.

The best audio should go directly to the Panasonic. Period.

Look around fixya for the most common video problems - not passing through the receiver unscathed.



Feb 23, 2011 | Panasonic SC-BT100 Theater System

1 Answer

My panasonic sa-vk 850 has NO LED display and I want it fixed. I don't know if it's a fuse but the red standby light is always on. PLEASE HELP!


It may be a fuse-resistor in the supply, FP5901. Test it.
If there are some questions - please on the mail - v-roslik@mail.ru

From Russia with love ;)
Vitaliy

Aug 18, 2010 | Televison & Video

1 Answer

I cannot get a picture from my sc-bt100 on my screen the sound is working no problem checked all leads and connections


How are you hooking it up? To what kind of TV? Best connection for SC-BT100 is via HDMI out on SC-BT100 to HDMI in on TV, otherwise you aren't getting full HD output. Make sure your TV is set to correct input source.....

Dec 27, 2009 | Panasonic SC-BT100 Theater System

1 Answer

Panasonic error code


Take the case off and clean out the fan, it worked for me, it was the protection circiut kicking in to prevent the amp from blowing.

Nov 25, 2007 | Audio Players & Recorders

Not finding what you are looking for?
Panasonic Home Theater System System Logo

Related Topics:

646 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Audio Players & Recorders Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

 Grubhead
Grubhead

Level 3 Expert

5190 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Panasonic Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...