Question about HP LaserJet 2420 Printer

1 Answer

Hp lj2420 errcode 68.2 - HP LaserJet 2420 Printer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 54 Answers

The printer permanent storage is
full. Some settings might have
been reset to the factory defaults.

1. Press the SELECT ( ) button
to continue.
2. For 68 errors, turn the
printer off, and then turn the
printer on again.
3. If a 68 error persists,
initialize NVRAM. See the
caution and note in To
initialize NVRAM.
4. If this error message persists,
replace the formatter (see
Formatter).

Posted on Apr 11, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Load rom errcode=-4


Update the firmware. Problem is then fixed.

May 21, 2012 | Nintendo Video Game Consoles & Games

1 Answer

Hi - My HP Laser Jet 2420 printer has error code 49.3C1A. What does that mean?


Go to http: www.hp.com/support/lj2410, www.hp.com/support/lj2420, orwww.hp.com/support/lj2430. ClickDownload Drivers and Software.Check for the latest firmware imageversion at the bottom of the page. Ifthis firmware image is newer than theone installed on the printer and theprinter can receive a firmware update,download the newer firmwareupgrade. Not all printer models canreceive firmware upgrades.4. Try printing a job from a differentsoftware program. If the job prints, goback to the first program and tryprinting a different file. If the messageappears only with a certain softwareprogram or print job, contact thesoftware vendor for assistance.
This is a difficult problem to troubleshoot.Could also be bad memory or bad EIO device.
I would recommend getting a printer tech to look at it.

Sep 19, 2011 | HP LaserJet 2420 Printer

1 Answer

How to solve service error 49.00 in hp laserjet 2430dtn printer


49.XXXXX ERROR
A critical firmware error has occurred.

1. Press Cancel Job to clear the print job from the printer memory.
2. Turn the printer off, and then turn the printer on again.
3. Go to http: www.hp.com/support/lj2410, www.hp.com/support/lj2420, or
www.hp.com/support/lj2430. Click Download Drivers and Software. Check for the latest firmware image version at the bottom of the page. If this firmware image is newer than the
one installed on the printer and the printer can receive a firmware update,
download the newer firmware upgrade. Not all printer models can
receive firmware upgrades.
4. Try printing a job from a different software program. If the job prints, go
back to the first program and try printing a different file. If the message
appears only with a certain software program or print job, contact the
software vendor for assistance.

1. After performing the actions listed in the preceding item, if the message
persists when using different software programs and attempting specific print
jobs, disconnect all cables that connect the printer to the network or a
computer.
2. Turn the printer off.
3. Remove all memory DIMMs and thirdparty solutions from the printer.
4. Remove all of the EIO devices from the printer.
5. Turn the printer on.
6. If the error message disappears, reinstall each DIMM, Compact Flash card, and EIO device one at a time, making sure to turn the printer off and then on again (booting to the Ready
prompt) as you install each device. To replace a DIMM, see Appendix D - Printer memory and expansion in the LaserJet 2400 Series User Guide.
7. Replace the DIMM or EIO device that caused the error message.
8. Remember to reconnect all of the cables that connect the printer to the
network or computer.
9. If the error message persists, reinstall the firmware with the latest possible firmware upgrade. Go to http:www.hp.com/support/lj2410, www.hp.com/support/lj2420, or www.hp.com/support/lj2430. Click Download Drivers and Software.
Check for the latest firmware image version at the bottom of the page. If this firmware image is newer than the one installed on the printer and the printer can receive a firmware update,
download the newer firmware upgrade. Not all printer models can receive firmware upgrades.
10. Replace the formatter

Feb 28, 2011 | HP LaserJet 2430dtn Printer

1 Answer

Every time i go on my r4i and click a new game it says errcode=-4


change language to english,then try again if dont work click LRselectSTART should reset

Jan 30, 2010 | Video Game Consoles & Games

2 Answers

Load rom errcod=-4 please reset system


Take the battery out to reset the ds

Jan 13, 2010 | Nintendo DSi White Console

1 Answer

HP LJ2420 Not recognizing toner


remove left side cover, in the center there is a system of 2 black plastic levers, one has come loose from its mounting. Its pretty straight forward to see how it should go back.

Apr 01, 2009 | HP LaserJet 2420 Printer

1 Answer

Hp 2420 service code 49 2F90 what does it mean?


A critical firmware error has occurred.
Go to http: www.hp.com/
support/lj2410, www.hp.com/
support/lj2420, or
www.hp.com/support/lj2430.
Click Download Drivers and
Software
. Check for the
latest firmware image version
at the bottom of the page. If
this firmware image is newer
than the one installed on the
printer and the printer can
receive a firmware update,
download the newer firmware
upgrade. Not all printer
models can receive firmware
upgrades.
Failing that replace the formatter

Aug 13, 2008 | Office Equipment & Supplies

1 Answer

49.4c02 service error coming in hp laser jet 2420dn printer


This is a firmware error, you can try turning the printer on and off a few times, reseating any memory and the formatter board. If these steps don't work Go to http: www.hp.com/
support/lj2410, www.hp.com/
support/lj2420, or
www.hp.com/support/lj2430.
Click Download Drivers and
Software
. Check for the
latest firmware image version
at the bottom of the page. If
this firmware image is newer
than the one installed on the
printer and the printer can
receive a firmware update,
download the newer firmware
upgrade. Not all printer
models can receive firmware
upgrades.
If still no joy replace the formatter (this is the normal coarse of action)

Aug 13, 2008 | HP LaserJet 2420dn Printer

1 Answer

Always paper jam.


Check to see if something isn't blocking the paper path.

You could try cleaning the feed rollers as well.

Jun 12, 2008 | HP LaserJet 2420 Printer

1 Answer

HP LJ2420 won't print legal size


Not enough info.
does it try to,does it ask for the other tray, is it set for legal??????

Nov 07, 2007 | HP LaserJet 2420 Printer

Not finding what you are looking for?
HP LaserJet 2420 Printer Logo

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...