Question about Hotpoint 24 in. FDW60 Free-standing Dishwasher

1 Answer

Hotpoint aquarius+ fdw75

Was coming up with a10 on diplay and now when you start a cycle there is a dry girgling sound and there does not seem to be enough water coming through.

Posted by on

  • Cooroo Jan 02, 2009

    Everything but the prewash stops after about 2-3 mins and A10 comes up. However, water seems to be going in and out of the washer fine. Prewash works perfectly.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Http://www.howtomendit.com/answers.php?id=13831 look at this, we have same problem and on here it states - AL01 - Anti flood switch operated.... so worth looking into before calling engineer out

Posted on Aug 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a error code on my Hotpoint FDF 780P code reads A-10 can I fix this?


Please refer Hotpoint dishwasher error codes listed on this site.

http://www.ukwhitegoods.co.uk/help/fault-codes/dishwasher-fault-codes/3350-hotpoint-aquarius-fdf-dishwasher-fault-codes.html

Code A10 seems to indicate some problem with water heater or circuit involving water heater and thermostat. These are not easy to fix on your own unless you have some experience with repair of dishwashers. Some tips on fixing this are given here.http://www.justanswer.com/uk-appliance/38uhf-hi-i-hotpoint-dishwasher-fdf780-think-work.html

May 25, 2014 | Dishwashers

1 Answer

I have a Hotpoint Aquarius FDW 60 dishwasher. Crockery was with greasy smear on it. Since then the drying does not appear to be working. Seems the drying element has malfunctioned, can we replace this...


Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";}
Hi,
Check your heating element..


A bad heating element causes many problems in dishwashers…

Dishwasher Problems The Heating Element not Working

Dishwasher Maintenance

heatman101

Asker's Testimonial " explanation very clear. will give it a go and see how simple it was. thanks Ronnie " - ronnieshomes


Sep 08, 2010 | Hotpoint Dishwashers

1 Answer

Hotpoint Aquarius FDW60 Machine stops halfway through its cycle & the "fast" & "delicate" cycle LED's are flashing - what is my problem?


This sounds like the heater is not energising usually means the heater has failedalthough a blocked or sticking pressure switch will cause the same problem

Apr 14, 2010 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

My Aquarius FDW70 keeps coming up with code A10


Dear sir,

If your dish washer is type EV02 Module,
Error A10: means Faulty fill valve.
Check valve and associated wiring.

If your Dishwasher is
Standard Module + FDW70 + FDW75,
E10 means Heater fault.
Check heater and associated wiring.

i think it helps for solve your problem.
if you have any doubt regarding this issue leave a feedback we will glad to assit you.

Have a nice day
good luck



Sep 12, 2009 | Dishwashers

1 Answer

I have a hotpoint aquarius sdw60 with the eco 45 light flashing fast and will not reset I have tried turning off the power I have stripped the pump this was clear. then reinstalled it but it is still same


I have a Hotpoint Aquarius SDW 60 The delay 3hr &12hr lights are flashing at the same time. Machine won't start. If the door is slamed shut. It get stuck on the Fast & Prewash 40 degree cycle. and stays there.

Jul 13, 2009 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

My Hotpoint Aquarius diswasher won't dissolve the washing tablets


I don't have a solution, but the exact same problem is happening with my dishwasher. Nothing is getting cleaned properly.

Did you manage to get the problem fixed?

Jun 01, 2009 | Dishwashers

1 Answer

Hotpoint aquarius dwf33 does not always work?!!


I Had this problem its to do with dry joints on the circuit board, solution, resolder all suspect bad joints even though they might look alright especially all those that have heavy electronics connected to the board that could get vibrated.
Peter B

Mar 25, 2009 | Hotpoint 24 in. DWF32P Free-standing...

1 Answer

My aquarius hot point fdw70 comes up with error a10


Check out www.selfix-uk.co.uk for all hotpoint error codes and what they mean

Oct 07, 2008 | Dishwashers

4 Answers

Hotpoint Aquarius+ FDW70 Error Codes


i have the same on my dishwasher and have just been looking on the net. Found out that the error code A10 means open/short circuit fill value traic. Whatever that means!!! and to book a service engineer. Hope that helps

May 04, 2007 | Hotpoint 24 in. FDW60 Free-standing...

Not finding what you are looking for?
Hotpoint 24 in. FDW60 Free-standing Dishwasher Logo

Related Topics:

299 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

bosch5

Level 2 Expert

157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...