Question about Cell Phones
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Each telephone must be connected to line 1 and line 2 for
proper operation. The remaining lines 3 and 4 may — or may not —
be connected to each station as you desire. First plug in the battery, then the phone lines (1 & 2 are mandatory), and third the power cord. If your intercome LED is blinking red and green, then press: STORE IN, followed by "INTERCOM" followed by a free intercom# (i.e., any of the memory buttons 1 through 16 not already assigned to another telephone set). Then wait for the phone to go through its initiation sequence during which it searches each of the four possible lines. After that concludes, you should get dial tone on your active lines. :-) Marco
Posted on Jul 26, 2008
SOURCE: Headset has static
Perform a reset on the headset. Hold down the mute button (the dial on the back of the headset needs to be pushed straight in), and at the same time hold down the call answer button until you see the green light on the headset blink a few times. Release both the mute button and the call answer button. See if it works now. If it doesn't, try a re-subscription (should be available in the manual).
Posted on Apr 28, 2009
Resetting the older beige Engenius radios requires a screwdriver and a USB-to-serial cable. You must unscrew the small plate at the bottom, which covers a serial connector. Plug the serial cable into it and then into your computer. Follow these instructions to perform the reset:
Posted on Oct 28, 2009
Hello brett62. I can help you with this. I have the Metrologic Configuration Guide hosted on my website for my clients (www.shiftintoblue.com/resources/metrologic_config.pdf). Go ahead and download that pdf and you'll find the barcodes to recall the unit's defaults. I hope this helps. Good luck!
Posted on Jan 07, 2010
Your question gives insufficient information regarding which call button you're referring to, and no information about which country you're in so I'll have to stab around a bit and hope to hit the spot..
If you're asking why doesn't Bluetooth voice dialling work, then the answer is simple and really annoying: The Hero does not support it. Some folks claim it's just because it's not yet been added to the Android operating system, but I was told by HTC and T-Mobile tech experts that the phone does not support it at the basic hardware level. I don't trust the latter argument as there's now a few folks who claim to have transferred the application into the Hero by copying the files from a different HTC model (scroll down to post #44 onwards). I haven't been able to test this as I sent my Hero back when I discovered the lack of Bluetooth voice dialling. Android 2.0 *might* have it according to some, but the Android 2.0 website does not list it as a feature. HTC have not yet released their version of Android 2.0 yet so it's a case of wait 'n see.If you're with T-Mobile then the delay will be even longer as they'll need to tweak HTC's version of Google's Android 2.0 into a T-Mobile G2 variant <rolls eyes>. My understanding is that it will still be absent though.
If you're in North America, then the Hero already has voice dialling...sort of. Holding down the call key for a couple of seconds on the phone activates it. But you'll first need to touch the phone to wake it up, activate the voice dialling and then manually transfer the call to your headset. Utterly useless, and totally illegal in the many places where it's illegal to touch the phone whilst driving. On some networks the feature seems to be disabled and it does not work at all on UK/European models of the Hero.
There is another way to get voice dialling, but I'm unclear as to whether it will work via a Bluetooth headset: basically you install Google Voice onto your phone which allows you to search your contacts by voice command. Currently it's available only to those who reside in the USA.
Hopefully I've answered your question in which case I'd ask that you return the favour by rating my answer. If not, then please add additional relevant details and I'll try to improve upon my answer for you.
Posted on Jan 20, 2010
Tips for a great answer:
Oct 30, 2013 | Computers & Internet
Oct 07, 2009 | Grandstream HandyTone 486 ATA (HTATA486)
Jan 31, 2009 | Lands Phones
Aug 27, 2008 | Grandstream BudgeTone 200 IP Phone
47 people viewed this question
Usually answered in minutes!