I have a Konka DVD Player KLD - 1001 which I bought it today in china. I connected my DVD palyer to TV; but I can not see any display on TV. Can you help me regarding this

Do you have a signal source connected to it? Cable, Satellite, Over-Air cable. Are the cables firmly connected?

Have you cycled through the Input / Source button on the remote?

Konka are a budget brand from China.

Connect an RCA cable from the audio out on the TV to the Aux input on the surround sound palyer.

the back of dvd is easy because it only has outputs with color code, the inputs and outputs on the back of the tv are grouped if you look closely on the back. select video 1 as an input on tv, and start with the far left yellow jacks on the back of tv, connect yellow rca cable and check for pic on tv, if not move to next yellow jack on back of tv, until you get a pic, connect the red and white right below the yellow jack that gave you the picture and you should also have sound

Most DVD players connect via the rear audio and video jacks--once correctly hooked up you switch the set to that input--not the cable fitting but the a/v jacks if set has them.

Get a audio/video cable and connect both to the dvd palyer and the tv regarding the color of the cable and in the dvd player and tv.

need more info what connections does the dvd palyer have and tv in the back?

You have to connect the DVD player using the RCA video and audio cables that came with the player, they are three wires with yello, red and black connectors on either end. Connect the yello( video) cable to the yellow connctor on the DVD player and the other end to the yellow connector on the back ro the front of the TV, do the same for the others fro sound. Then turn the DVD palyer and TV on and select the correct input on the TV using the remote, they will be Line 1 or Line 2 depending on your connection. you can get to these either through the channels button or TV/Video buttons.

First check your TV AV Input connection that its works with other things like VCR.

Hidden switch for output coonections on back panel of dvd player.

DVD player must be made region free by unlocking it.. after that you can play all the discs you want.. for ubnlocking it you can try google//