Question about Whirlpool Washing Machines

1 Answer

Whirpool top loader off balance in spin cycle

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,510 Answers

Your machine is probably not standing perfectly level. To level the machine, partly fill it with water. Make sure that the drum is standing in the middle of the machine and then adjust the machine until the water is at the same level all around at the nearest set of holes to the water. Check that the drum is still in the center of the outer drum. Make sure that the adjusting feet are all firmly on the floor and that you cannot rock the machine at all by hand. A top loader must be 100% level or it will shake.

Posted on Apr 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my washing machine not complete a rinse & spin cylcle?


is it a top loader? if so, older top loaders do not have a balancing function so you must evenly distribute the load.

Oct 16, 2016 | Washing Machines

1 Answer

Makes clicking noise spin cycle


it may be any part of the balance mechanism under the machine..remember if you did not balance (level) it prior to installing, it has to self level on its own..this usually calls for some noise in the linkages when spinning..

Mar 04, 2014 | Maytag MAT15MNAWW Top Load Washer

1 Answer

I have a whirpool LSR7233DQO model top loader washing machine, a month ago it stopped agitating, now it will not spin at all on the spin cycle. It actually sounds like there is movement in the bade of the...


Sometimes the switch goes out (that little thing you held your finger on to keep it running). That's ~$20 to fix. If the washer runs, fills with water and won't spin once it reaches the spin cycle you probably need a new motor.

Feb 05, 2014 | Washing Machines

1 Answer

Always out of balance


out of balance is from the tub not level and or the air dampeners on the ends of the suspension rods are broken( top loader machines ---machine type not stated --
if it is a top loader and you laid it on its side , it is possible that the tub is now not level and the dampeners have been damaged

Oct 23, 2017 | Washing Machines

1 Answer

Top loader Maytag washer cannot balance load


The shock absorbers that hold the tank are broken. Then the load will move the washer all over the place.
Look online for an exploded diagram and order the new shocks for it

Nov 12, 2009 | Dryers

1 Answer

During spin cycle washer spins fine but toward the end of the cycle it spins out of control like it is out of balance? Any help is greatly welcomed.


Some front loaders have a super high speed at the end of the spin. Front loaders don't like small loads, the laundry does not spread out evenly enough for a balanced spin.

May 08, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Banging noise on spin cycle


most front loaders are balanced by a large: ready for this: cement block inside at the top of your machine and because spin is so fast it can sometimes hit inside your machine or it has brokin a peice off ,sorry but yours going to have to get the repair person out.adrian

Feb 15, 2009 | Bosch Classixx WFL 2066 Front Load Washer

1 Answer

Very loud shuddering noise when spin cycle stops


thats what happening,,the brake needs a little wd 40,,lube,,when unit stops the tub yanks.....

Dec 22, 2008 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Whirpool top loader unbalanced spin cycle


First change the springs - both the leveling and suspension. You may also need to change a few other parts on the brake and drive tube including the thrust ring. But replace the springs and let see what happens.

Post your results . Remember to rate this solution

Regards

Jul 27, 2008 | Whirlpool LSB6200KQ Top Load Washer

1 Answer

Whirpool Washer, Loads become unbalaced in spin cycle.


it has a bad balance ring on the top of the basket no so hard but not that easy either
you have to remove the case to get to the balance ring
go to www.sears.com and go to parts and put in the full model number, under the parts tab in appliances and select view brakedown and it will explain it better with you seeing it

May 08, 2008 | Whirlpool LSR5132PQ Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2247 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...