Question about Tomtom ONE GPS Receiver

3 Answers

I have the v1 model with the classic green light with no start up. i have tried the reset, held for different lengths of time followed by holding power button down. i have also changed the battery but no good. i was also thinking of trying "edmo 117" advice where he changed D8 and a chip. he said he could send pics so if he could that would be great.

Posted by on

  • mjtavis2004 Apr 08, 2011

    i had already tried the freezer option as i read it somewhere. what i really want is the picture or information on which ic and diodes to change as i mentioned in the first question can someone help with that please.

  • mjtavis2004 Apr 12, 2011

    sorry but have already tried sd card remedy, i have faulty components that need replacing. does anyone know what type of diode D2 is on the tomtom v1 please. Also i looked at diagram site suggested but it only gives basics on building a basic gps.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,961 Answers

It's a ZENER SOD-523 5.6V

you can order from this link
http://uk.farnell.com/rohm/edzte615-6b/diode/dp/1679979

Posted on Apr 12, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,833 Answers

As you are using TomTom gps Receiver, your device should have a SD card, remove it first and try to boot it. Try to leave it plugged into

charge for a few hours before you switch it on. If

you want a diagram for gps Receiver, visit this site :

http://circuitzoo.com/search/internal+circuit+diagram+of+gps+receiver/.

Posted on Apr 08, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,622 Answers

I had the same problem after I upgraded to the latest software version from the website. I find that popping the SD card out and then back in gets the power to come on, but you have to do it every time. Working for now.
Also my Tom tom One version 1 (purchased in July 2007) has had the problem of going blank on three occasions now. Recharging in car or via the mains charger for several hours does not solve the problem. Holding down the switch firmly for brief or long periods achieves nothing. I recalled hearing that freezing (literally) some electronic equipment can solve such problems and had already successfully brought a digital alarm clock back to life by putting it in the freezer. So with my Tom tom out of guarantee I wrapped it in a couple of plastic bags and put it in the deep freeze compartment of a refrigerator over night. Next day took it out, allowed a couple of hours to thaw out and then recharged for an hour before switching on. Instant revival! I have now repeated this treatment on three occasions when the unit packed in and each time it has worked perfectly. Of course the Tom tom handbook warns that the unit must not be exposed to extremes of high or low temperature; but I assure you my treatment worked.


After trying this out if it does not work for you, Then you can place the complaing on the sites below for more help.


http://www.tomtom.com/support/solution.php?GID=1&PID=232&SID=0&CID=152&Language=4&FID=7134.

and

http://uk.support.tomtom.com/app/answers/detail/a_id/8324/?locale=en_GB

Hope it helped..

Posted on Apr 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ink absorber full on a canon mp990 - Canon PIXMA MP990 All-In-One InkJet Printer


Try the following steps. I tried it on my MP990 and it worked.
  1. Make sure the printer is turned off.
  2. Press and hold the Resume button (triangle inside a circle).
  3. Whilst it is held down, hold down the Power button. The green led light should come on.
  4. Keep the Power button held down. Release the Resume button and then press it twice. The light should go amber, then green again.
  5. Release the Power button.
  6. Press the Resume button four times and then press the Power button straight after to confirm the selected action (Reset Counter Absorber).
  7. Turn off the printer and then turn it on again

Jun 02, 2017 | Canon PIXMA Office Equipment & Supplies

1 Answer

How do I reset the counter on the waste ink absorber on a canon MG5220. I have tried everything I can find with the buttons on the printer but nothing seems to make a difference.


Resetting the waste ink absorber on a Canon printer can resolve some error codes that appear when turning it on.
  1. Make sure the printer is turned off.
  2. Press and hold the Resume button (triangle inside a circle).
  3. Whilst it is held down, hold down the Power button. The green led light should come on.
  4. Keep the Power button held down. Release the Resume button and then press it twice. The light should go amber, then green again.
  5. Release the Power button.
  6. Press the Resume button four times and then press the Power button straight after to confirm the selected action (Reset Counter Absorber).
  7. Turn off the printer and then turn it on again

Reset Canon Printer ink absorber

Dec 03, 2016 | Canon Office Equipment & Supplies

1 Answer

No picture on TV


Not sure if you saw Tom's Guide
at Sharp lcd tv power button flashing

(1) 4tinyhearts said:
I unplugged the TV and held the buttons down and it continued to flash. I continued to hold down the two buttons and replugged it in again and it worked. TV back up and working.

(2) lastditcheffort said:
Unplugged it. After looking for a new tv online I decided to try getting it to work. So, plugged it back in and held down the power button, a red light came on, held down the power button again and an orange light came on, held down power button again and green light came on and tv powered on. This was simply a case of trial and success!

(3) Nateinportland said :
unplug, hold power button, plug in. If that doesn't work, unplug all the HDMI cables, unplug the power, hold power button, plug back in.

Jun 04, 2016 | Sharp Aquos Televison & Video

1 Answer

Error 5B00 in canon pixma MG5370


Hi ..
Try to Reset Printer Ink Obsorber..
Resetting the waste ink absorber on a Canon printer can resolve some error codes that appear when turning it on.
  1. Make sure the printer is turned off.
  2. Press and hold the Resume button (triangle inside a circle).
  3. Whilst it is held down, hold down the Power button. The green led light should come on.
  4. Keep the Power button held down. Release the Resume button and then press it twice. The light should go amber, then green again.
  5. Release the Power button.
  6. Press the Resume button four times and then press the Power button straight after to confirm the selected action (Reset Counter Absorber).
  7. Turn off the printer and then turn it on again

Apr 06, 2014 | Canon Pixma iP6210D InkJet Photo Printer

1 Answer

How to repairing for error 5b00 canon mg5370 pixma printer


Hi ..
Try to Reset Printer Ink Obsorber..
Resetting the waste ink absorber on a Canon printer can resolve some error codes that appear when turning it on.
  1. Make sure the printer is turned off.
  2. Press and hold the Resume button (triangle inside a circle).
  3. Whilst it is held down, hold down the Power button. The green led light should come on.
  4. Keep the Power button held down. Release the Resume button and then press it twice. The light should go amber, then green again.
  5. Release the Power button.
  6. Press the Resume button four times and then press the Power button straight after to confirm the selected action (Reset Counter Absorber).
  7. Turn off the printer and then turn it on again

Apr 05, 2014 | Office Equipment & Supplies

2 Answers

Canon printer error 5100


5100 seems to be a Carriage Home Position Error. Clean the plastic strip that runs the length of the carriage, it may be contaminated. Then load the tray with the blank papers.

Then reset the Printer: Following are the steps:

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal.

This should work. If not, install the Driver and Software from the Installation CD provided with the Printer.

You can also download the Driver from the following link:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=116&modelid=13368#DownloadDetailAct

Select the Operating System installed to download the compatible Driver.

Jul 04, 2010 | Canon PIXMA MP160 All-In-One InkJet...

3 Answers

How to reset absober full mp198


PLEASE TRY THIS, Probably your waste ink counter. Should be cleaned or replaced before resetting but usually you can get away with resetting once.
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Select functions below with RESUME, execute with POWER

0 presses - green light - Test Print (exit service for i960)
1 press - orange light - EEPROM info print
2 presses - green light - EEPROM initialise
3 presses - orange light - reset waste ink counter

Feb 26, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

Green light, followed by yellow light flashes 5 times, then green again. Print screen says operator error, press printer's resume button.


Hi there
You can try not really know but it like your waste ink needs to be reset.

Start with the printer OFF

1. Hold down RESUME and then hold down POWER
2. Release RESUME
3. Press RESUME twice, then release POWER
4. Wait until print head stops moving
5. Press RESUME four times (if four doesn't work try three times)
6. Press POWER once
7. Press RESUME four times (if four doesn't work try three times)
8. Press POWER once

Repeating the RESUME/POWER code twice made the difference, the fixes I found wouldn't work because they stopped at step 6.



Feb 12, 2010 | Canon I960 InkJet Photo Printer

4 Answers

Changed water filter red light stays on


Afer you change the filter and have run the water for about 1 minute you then hold down the light & lock button together and this should turn the change filter light off.

Apr 23, 2009 | Refrigerators

1 Answer

Canon i950 won't print


try this Probably your waste ink counter. Should be cleaned or replaced before resetting but usually you can get away with resetting once.
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Select functions below with RESUME, execute with POWER

0 presses - green light - Test Print (exit service for i960)
1 press - orange light - EEPROM info print
2 presses - green light - EEPROM initialise
3 presses - orange light - reset waste ink counter.

one by one

Jan 25, 2009 | Canon i9900 InkJet Photo Printer

Not finding what you are looking for?
Tomtom ONE GPS Receiver Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tomtom GPS Experts

LP

Level 3 Expert

485 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a Tomtom GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...