Question about Juicers

1 Answer

I need parts for an oscar da 802 juicer. i have lost everything but the motor when moving house. thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,739 Answers

I am not aware of replacement parts being made available for these products.

However, the Oscar Front End Juicer Upgrade may be the answer to your problem if you only have the motor. See here:

http://www.oscar-living-juicer.com/store/oscar-front-end-juicer-upgrade.html

As this is a significant cost I would recommend you contact the company to verify that the Upgrade will work with your 802 motor. Use the webform here:

http://www.oscar-living-juicer.com/contact-us/

Once you verify compatibility or are able to have the company advise on the availability of parts for your 802 you might consider the website in which country from which to place your order:

http://www.oscar-living-juicer.com/world-pricing/

Not all countries may offer the upgrade so that may also affect your order site.


Posted on Apr 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, I need to replace the cord on my Acme 6001 juicer that has a nick/cut in it. How do I do this.


Well, you have to remove four screws on the bottom to separate
the housing and expose the wiring. The center locking nut and
screw is for adjustment so don't mess with it. Be careful when
pulling it apart, noticing where everything belongs. If the insulation
on the individual wires are not nicked, you can just tape it up. When putting the housing together you will notice some resistance
since you will be raising the spring loaded motor shaft.

Jan 09, 2011 | Acme 6001 Juice Extractor

1 Answer

Not sure how to assemble juiceman jr juicer,


Model #JM01C K: The motor works. The black start button works. The on-off Switch does not engage with the start button when moved up and down. Am I missing a part?


Dale
dale@webr4m.com








Jan 03, 2011 | Salton Jr. JM1 Juicer

1 Answer

HOW DO I DISASSEMBLE ACME JUICER TO REPLACE CORD? (CLEAR TOP)


Remove 4 screws on bottom, leave center locking nut and screw
alone, and separate housing to expose wiring. Housing may be
juicy stuck together and be mindful of where everything belongs.
When reassembling you may feel resistance since you will be
raising the spring loaded motor shaft.

Dec 03, 2010 | Acme 6001 Juice Extractor

1 Answer

My juicer was in a flood. I sterilized the top part of machine, what do I need to do to the motor's section? thank you


put the motor section few weeks at drying, not very very hot, be careful, even so tthat can make a short circuit!!!!!!

Feb 15, 2010 | Acme 6001 Juice Extractor

1 Answer

In a recent move, I have lost my Juice Lady operating manual. How can I get instructions on the operation of my juicer?


  1. Go BAck To that store you bought it from.
  2. And then ask them if they could send someone to your house to connect it.

Jan 05, 2010 | Juicelady The Juice Master Juicer

2 Answers

Manual for an OscarJuice Extractor ?


Hi!

You can download the manual from the link---

Oscar juice extractor

This is the only one available. Please rate this solution as fixya if found useful.

Thanks
Rylee

Feb 24, 2009 | Oscar Juicers Living

2 Answers

Trying to find a part for the power juicer CL-003 AP


The top white part connects to the motor. You have to buy the whole bottom part. It's not separate.

Jan 09, 2009 | Jack Lalanne Power Juicer 250 Watts

2 Answers

Help I've lost the screw for the juicer plate


goto http://www.thegourmetdepotco.com

part number:

Waring Juicer Clutch
Item #501238
Plastic clutch for shredder plate

Nov 08, 2008 | Waring 6001 Commercial Juice Extractor

3 Answers

The blade will not spin when the top piece is secure, & I the inside will not come out to clean


There is a roll pin under the flywheel, I you can get the basket off then you pull up on the flywheel , It is the last part before the motor housing. Once you have that off I think you may find that pin is sheared off. It is a common automotive or bearing house part. push out the old and push in the new pin and away you go. The new pin shoud protrude about 3?16 " on both sides of the pin. I hope this helps.

Dec 27, 2006 | Acme 6001 Juice Extractor

Not finding what you are looking for?
Juicers Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Juicers Experts

kakima

Level 3 Expert

102366 Answers

Tom Chichester

Level 3 Expert

34766 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Juicer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...