Bulova Watch Logo

Related Topics:

Posted on Dec 29, 2017
Be the first to answer

How do I set the VoiceZone watch to tell 12H time instead of 24H military time. The instructions state to hold down SET for more than 2 seconds until I hear "Time set" and the 24H or 12H digits flash on the display and to repeatedly press ADJ to select 12H or 24H; however, I do not see 12H or 24H.

Answer This Question

5 Related Answers

Anonymous

  • 111 Answers
  • Posted on Aug 27, 2008

SOURCE: armitron digital watch

press the mode button until the display lap or blinking then press udjust button to select the digit that you want to chagne

Ad

SKW914

  • 1 Answer
  • Posted on Dec 23, 2008

SOURCE: how to set up ladies roxy digital watch

I found users instructions on roxy website at:
http://www.roxy.com/search/index.jsp?f=Taxonomy%2FROXY%2F2818169&categoryId=2818071&f=Taxonomy%2FROXY%2F2818071&fbc=1&fbn=Taxonomy|Watches&fbx=0

We were able to program our watch completely!!!

If you look on the back of the watch that you bought on the metal plate, it tells you the style. Ours was the Roxy 70's digital watch, and I found specific instructions at (even if this is not your style, the instructions may work):
http://www.roxy.com/graphics/uc/roxy/manuals/Roxy_manual_watch_70s.pdf

Anonymous

  • 1 Answer
  • Posted on Dec 27, 2008

SOURCE: how to set time on Harajuku Lovers digital watch

See, you just have to hold the blue button (in TIME 1 "T1") till the screen tell you "LIGTH OFF", then push the green button and u will see all the option.
i found it by myself... i took time but i did it...
i hope this can help u...
see ya....

Anonymous

  • 2 Answers
  • Posted on Jan 05, 2009

SOURCE: Rolex oyster perpetual datejust time/date setting instructions

unscrew the winding pin until it opens to the first position. (this position is for self winding. approx 30 turns clockwise will fully wind the watch)pull pin to the next position. this sets the date if it is a quickset. 1985 to present. again turn clockwise to the desired date is present. pull the pin to the final position and this will set the time turning clockwise as well. hope this helps.

Anonymous

  • 8 Answers
  • Posted on May 21, 2010

SOURCE: lost instructions to set my solo digital watch

Stop Solo Digital watch beeping every hour:

1 - Press and Hold RESET button
--- (keep holding while doing step two) ---

2 - Press START and you should notice the left circular display (with the alarm image) lose it's ring of blocks.

--- It should also beep once to indicate the change. ---

That should be it.
This was done with a black and gray Solo­™ 30m Water Resist Digital Watch

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I reset the Seiko ch-899
You can follow these steps to reset your watch manually:
  1. Press and hold "SET" button for 2 seconds until the hour digit.
  2. Press "ADJUST" button to change the value of the hour digit.
  3. Press the "SET" button once, the minute digits will flash.
  4. Press the "SET" button once, the second digits will flash.
  5. Press the "SET" button, "12H" or "24H" will flash.
Read full answer
Sep 12, 2019 • Seiko Watches
0helpful
1answer

Setting military time
If you mean switch from 12h to 24h and vv,all you have to do is to press the "ADJUST" button until digits on the display blink.Then press the "MODE" button until 12H blinking appears.Press the "START-STOP" button to switch to 24H.When finished press the "ADJUST" button again.
Read full answer
Dec 14, 2013 • Casio G-Shock G-Rescue Tide Graph Watch
0helpful
1answer

Hi I have a gshock g-8100 and for some reason the time zone changed completely Im trying to change the time to regular California time but it looks like its on military time. I keep changing it and...
Casios have 2 time modes.The 12 hour mode (am,pm) and the so called "military time" 24 hour mode.When your set time,date,year there is an option 12H or 24H.Choose the 12H by pressing the lower right button when in setting procedure,I say again.Press tthe upper left "ADJUST" button to finish the procedure.
Read full answer
Feb 03, 2013 • Casio G-Shock Green Resin G-8100B-3DR
0helpful
1answer

How do I change my Armitron WR165 watch from military time to 12 hour time?
To change your Armitron WR165 watch from military time (also known as 24-hour time) to 12-hour time, you will need to follow these steps:
  1. Press and hold the "mode" button until the display shows the current time format (either 12H or 24H).
  2. Press the "set" button to toggle between the two time formats.
  3. When the desired time format is displayed, press the "mode" button to exit the setting mode and save the new time format.
If you are having trouble changing the time format on your watch, you may want to consult the user manual for your specific model, as the steps may vary slightly depending on the version of the watch you have. You can also try contacting Armitron customer support for further assistance.
Read full answer
Jun 14, 2011 • Watches
7helpful
1answer

How do i get my g shock out of military time
From the main time display, hold down the adjust button until it beeps and your time zone is flashing on the bottom of the display. Then press adjust again. 12H or 24H will be flashing at the bottome. Use the receive button to cycle the mode. When it's what you want, press adjust.
Read full answer
Mar 14, 2011 • Casio G-Shock GW500A-1V Wrist Watch
4helpful
1answer

On my Casio G-shock GW500A, the time is off. i dont want it on 24time and its an hour ahead
Sounds like you're set for the wrong time zone, and your 12h/24h setting is off.

To change time zone: Hold down the adjust button until it beeps. Your time zone will be flashing at the bottom of the display. Use the Time Memo and/or Receive buttons to change it to the correct time zone. Then... To change to 12H mode: Press adjust again. 12H or 24H will be flashing at the bottom. Use the receive button to cycle the mode. When it's what you want, press adjust once more.
Read full answer
Feb 26, 2011 • Casio G-Shock GW500A-1V Wrist Watch
0helpful
1answer

How to get from military time to standared time no instructions manuel
Hold "Set"
use "mode" to browse
when you get to time setting the 24h/12h setting should be first thing you can do. press "St/Sp" button when you see the "24h" icon flash it should switch to "12h"
Press "Set" You are done!
Read full answer
Jan 06, 2009 • Columbia All Sport Digital watch
0helpful
1answer

How do i set the time on 1440 T5K085
The instructions that came with my watch didn't work but after playing around with the buttons for a while i final came up with this: Press the mode button for 2 secs. The first display is the alarm. Press mode again and the time shows with the seconds flashing. Use the set button to change seconds, minutes, hours. Use the start/stop button to change from seconds to minutes to hours.This will then take you to change the month, date and day of the week. Mode takes you back to the start (time display). The alarm is changed in the same way.
To change from 12h clock to 24h clock keep the set button pressed (the alarm time is displayed) and press mode, the 'A' will disappear when in 24h mode
When the time is displayed press the start/stop button to show the date.
Not sure how to use the countdown timer or how to stop the alarm yet though!
Read full answer
Aug 13, 2008 • Timex Watches
0helpful
1answer

Technomarine NT02 sport
First find the set button and press it for 15 seconds the number is going to flashing,that is the time you going to set,go to mode button there where you going choose to set ,the hour; the date ;the alarm and whatever you like to set.to set the time first the hour and the minutes by the opposite button is use to scroll up the number and to scroll down.after you finish set the time ,there is you going to choose normal time 12h or military time 24h.That all lyod message me whatever the result.
Read full answer
Jun 18, 2008 • TechnoMarine Nitrox 44mm Rubber Strap...
13helpful
4answers

Military Time
Hello I have the same watch and had the same problem. You press the mode button till you get to the point to change the main time, you then press the reset button (bottom button on right side of the watch)to toggle to the hour place, you then cycle thru the time untill the "h" in the top right hand corners disappears and then the watch will be back on regular time.

Chris
Read full answer
Jun 17, 2008 • Bulova Men's Watch
Not finding what you are looking for?

View Most Popular

Watch

  • Watches

Related Question

How do I reset the Seiko ch-899

  • Seiko Watches

Related Topics

179 views

Ask a Question

Usually answered in minutes!

Popular Questions

How do I set my us polo watch

Bulova Watch

I cannot get the back of my Bulova watch back on.

Bulova Men's Watch

How do I set time etc on a coleman sports watch,

Bulova Watch

Can't figure out how to deactivate the alarm on Umbro U564B watch

Bulova Watch

Armitron WR165 How can I turn the alarm off

Bulova Watch

Is It Time for a Smartwatch?
Is It Time for a Smartwatch?

View all Fixya Reports

Top Bulova Watches Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Bulova Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...