Question about GoVideo Televison & Video

4 Answers

I have go.video VCR/DVD combo. I am trying to program it to work off my COGECO universal remote and apparently don't have the correct code number

Posted by on

  • 1 more comment 
  • dchapple441 Aug 06, 2008

    The make is GO.Video and is a VHS/DVD combo. No model number or name appears on the unit.

  • dchapple441 Aug 07, 2008

    Thanks - at least I have a phone number - now if I can get by that automated attendant ----

  • Anonymous Mar 22, 2014

    Have cogeco universal remote DVD code neede

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

I will need the model of the cogeco universal remote in order to furnish you with possible codes and the directions for entering the codes. As soon as I get this information, I will post what you need.

please let me know if you need anything else

my best to you

Posted on Aug 06, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 236 Answers

You can probably find your code here.

Or if that doesnt work, go here and choose your model.

Posted on Aug 06, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

Hi,

You will have to contact customer support at this no. 519-972-6666 to get the codes.
If you need anymore help let me know..

Posted on Aug 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

What is the brand and model of the combo player that you have>

Posted on Aug 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It's not working what can I do to program one for all controller to rca tv


HI,
The One For All 3 Device Universal Remote Control is preprogrammed at the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola cable box. To control devices other than the default brands, perform the following steps; otherwise skip this section:

HOW TO PROGRAM

1.Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc)

NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step.

( CHECK THE BELLOW ADDED LINK TO FIND THE CODE )


2.On the remote control, press a device key once (i.e., DVD/VCR, CBL/SAT, or TV).

NOTE: To program control of a VCR, PVR (or DVR), TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCRonce. After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions.
NOTE: To program control of a DVD Player, DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD/VCRonce. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SATonce.

3. Press and hold SET until the LED (red light) blinks twice, then release SET

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the LED will blink twice.

NOTE: If the LEDdid not blink twice, repeat steps 2 through 4 and enter the same code again.

5.Aim the remote control at the device and press POWER once. The device should turn off.
If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works. If it still doesn't work, try Searching For next code.

NOTE: If the device does not have a POWER key, press PLAY

6. Repeat steps 1 through 5 for each device you want to control. For future reference, write down each working device code following.

Electronics Equipment Repair Center ONE FOR ALL URC3021 UNIVERSAL REMOTE...
Electronics Equipment Repair Center ONE FOR ALL URC3021 UNIVERSAL REMOTE...

Jan 25, 2015 | RCA Televison & Video

Tip

Why Am I Unable To Program The RCA Remote Control To Operate My Components


Why am I unable to program the RCA remote control to operate a component? Why am I unable to program the RCA remote control to operate a component? If you are unable to program the remote control to operate a component, review the following information:

Compatibility
If none of the programming procedures work, the universal remote control may not be compatible with your components, based on the type of infrared technology and the age of the components. Some RCA universal remote controls will only work with components manufactured after 1990.

Distance
If you are testing the remote control after you have entered a code, you may be too far away from the component or you may not have the remote control aimed directly at the component. Because the remote control uses infrared (IR) technology to communicate with components, there must be an unobstructed path between the remote control and the IR sensor on the component.

Code Entry Methods
If the Direct Code Entry method was used to enter the codes for your brand and the unit is still not functioning properly, try one of the automatic code search methods instead. During automatic code search, the remote searches for the correct code to program.

Modes
For the remote control to know which component you wish to operate, you must put the remote control in the correct mode by pressing the corresponding component button.

Combo Units
To program the remote control to operate combo units, such as TV/VCR’s, TV/DVD’s, or TV/VCR/DVD’s, use the combo codes in the Code List to program the individual corresponding component buttons. Once programmed successfully, the TV button controls the TV functions on your unit, and the DVD or VCR button controls the DVD or VCR functions, respectively. The codes in the combo section should be tried first, using the Direct Code Entry method on the TV and DVD or VCR buttons. If this is unsuccessful, use one of the Code Search methods to program your combo unit.

Batteries
Make sure the batteries are new and properly installed.

on Jun 19, 2009 | RCA DIRECTV Satellite Remote Control

2 Answers

Need code for magnavox tv urc-4021boo


Hi, the codes you have requested;

Magnavox - 0054, 0706, 0030, 1454, 1254

Instructions to program code:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2. On the remote control,press a device key once (i.e., VCR/PVR, DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.

Feb 12, 2011 | One For All URC-4021 Remote Control

3 Answers

I have a magnavox mwd2205 dvd/vcr combo with no remote. I've tried programming it to my Charter cable remote and to a GE universal remote, but can't get it to do anything but turn the machine on and off....


This DVD/VCR isn't compatible with the GE Universal remote. Sorry.

I would recommend contacting Magnavox (actually FUNAI CORP.) at www. magnavox.com, and seeing if they would be willing to send you a remote that was compatible with your player. There was another Magnavox player remote that also worked with Magnavox MWD2205. So it's possible that a number of remotes would work for you. Good luck! :)

Dec 28, 2009 | Philips Magnavox MWR20V6 DVD Recorder/VCR

1 Answer

Sanyo dvd/vcr combo


Your universal remote would have seperate selection buttons for VCR and DVD. If you don't have a VCR button, use AUX. Try programming each function seperately - DVD code for your manufactirer on the DVD button and VCR code for your manufacturer on the VCR button.

Sep 12, 2009 | Sanyo DVW-7100A DVD Player/VCR

4 Answers

Need code for Emerson TV,DVD,VCR Combo


I don't know if you guys even need this advice anymore, as it's 1-2 years late, but if your universal remote has a VCR setting, the Emerson 13" CRT TV/VCR combo I have operates under that mode.
The code I used was 002. These may also work: 278, 184, 479, 000, 121, 211, 037, 043, 061, 208
Remember, program your remote as if you were setting up a VCR (and NOT a TV). For instance, on my GE universal, I hold the "code search" button down until I get a steady light. I hit VCR, and then I entered 002. Works like a charm.

Mar 25, 2008 | RCA Universal Remote 3 Device Remote...

1 Answer

Remote control cod


I guess I will have to buy another universal remote control that will have some codes for
the GoVideo model DV1030 that I have.
Since apparently you all are not going to help me, unless I spend money to get the code. I think that your customer service is very poor. I will not ever buy another Go
product.
Gisela

Mar 02, 2008 | GoVideo Go Video DVD/VCR Combo

2 Answers

Remote code for go video model# dv2140 dvd/vcr combo


I have a universal remote from ComCast cabel and was able to get code 0591 to work for the Go Video DV2140. It's one of the same codes as the Zenith DVD player.

Dec 14, 2007 | GoVideo DV2140 DVD Player/VCR

6 Answers

Remote control code for magnavox dvd/vcr combo


I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?

Sep 07, 2007 | Philips Magnavox Learning Universal Remote

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top GoVideo Televison & Video Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

 Grubhead
Grubhead

Level 3 Expert

4852 Answers

The Knight
The Knight

Level 3 Expert

72620 Answers

Are you a GoVideo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...