Question about Sylvania G-Netbook

1 Answer

I bought a 7" note and i have internet but i don't

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,267 Answers

Please try and follow the detail below.

It is looking for apassword (WiFi Network Key) You have to double click on the little computericon down in the right tool bar area, the one with the two side radiating arcs,and possibly has a small red X under it. The red X indicates that it is NOTconnected. When you double click on that icon a window called RT28701 opens up,then you click on Wireless Information tab, then you cursor down to the name ofyour WiFi and high light it and click the connect box. Then another windowopens up called Network Properties. Uncheck "The key is providedautomatically" box. This will allow you to type in your "NetworkKey", the password that protects your network from outsiders. This"KEY" was set up when you installed the router on your servercomputer. If this does not work at first, turn the machine over on it's backand using a toothpick, insert it into the little hole about an inch diagonallyfrom the right corner of the data plate, this will re-load a new copy ofeverything including the WiFi RT28701 driver. sometimes thisdriver gets confused. See my TIP at: http://www.fixya.com/support/r7350901-fix_synet07526_wifi_flashing AdditionalInformation When I try to signon with the red X showing, I get "The page cannot be displayed If I thendouble click on the icon down in the right corner I elucidated above, RT28701opens up to "Internet Protocol (TCP/IP) with all zeros in the IP addressfield, and Subnet Mask, with no entries in the default gateway. That is a clueto me that the automatic sign on has not found a viable network, or needssomething else. If I then click on Wireless Information tab, the list ofavailable networks, appear in the box. The machine keeps trying to associate myprevious entered name site with my preferred site and tells me the signal isgood, but it cannot link up. This is a signal to me that it has lost my NetworkKey or that the softwarehas failed or both. I then click on advance and delete my preferred network andhit OK, this will force the software to ask me for my network again, and noticethat the preferred is missing. I click on the name of my network again and thenhit connect., then the Wireless Network properties window opens up and I caninsert my Network Key again after I uncheck the "The key is providedautomatically" box. I enter the key and hit the OK button. I still do notget a connection, so I reboot the machine, and wait for about 30 seconds andthe machine synchs up because the little RED X under the icon has disappeared.Now the machine will hook to the internet as long as I want to, but sometimeswhen I turn the machine on it will not synch, so I go through the abovesequence again. The secret is once you have entered your key and ask for themachine to synch up you have to reboot. Why? I do not exactly know, but Isuspect that the WiFi driver looses it You may also wantto look at the TIP http://www.fixya.com/support/r7679654-sylvania_syneto7526_wirless_keyboard To make your knowledge complete

Posted on Apr 04, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Am using nokia c5, whenever i try to download, app, pix, song oranything on the web it'll just display "Disconnected" pls help me thanks


check its internet settings where proxi password username given if u don"t know u also cantact ur service provider

Jun 09, 2013 | Cell Phones

1 Answer

Facebook, Yahoo, Google don't open in Chrome or Ie, only in Firefox.


You said that the sites u mentioned are working perfectly in safe mode r8?? It means that some program is there which is blocking access to these sites in normal mode.. Do the following
1. Disable all startup items and services in safe mode .
2. Restart ur pc and open it in normal mode.

Now check weather your chrome or IE8 browser can access to these sites.
THank you

Jun 10, 2012 | Google Chrome

1 Answer

Laptop doesn't connect to the internet


If this is brand new, did it come with the window 7 disc? usually all laptops I have come across the operational system is already installed and ready to go. The only thing I can suggest is go online to Lenovo and see if there is an updated driver for windows 7

Mar 09, 2012 | Lenovo Computers & Internet

1 Answer

I need the unlock code or subsidy code for my T-Mobile Motorola W490 phone to use with my AT&T SIM card, please. It works with my SIM except for the browser. I cannot get games or connect to the...


You can get the unlock code through online..........give your IMEI number and get the unlock code for ur mobile.... i will suggest the website Unlock-Zone.com which is doing good service .....you can approach this website.
This site is nearly perfect and they were recommended highly in the cell phone forums. I used them to unlock my cell phone. contacted them and within 30 mins i had my unlock code and my phone was unlocked.
Hope this helps.

Sep 22, 2011 | Motorola Mobility SLVR L7 Cellular Phone

1 Answer

My old "HP F2200, All-in one" printer does not fit


HP should give you a link for the driver. Lexmark did for me. A friend didn't even try when his was not compatible with his new computer, and he just bought a new one. Don't do that until you contact HP for the driver.

Sep 04, 2011 | Computers & Internet

1 Answer

IP Address Conflict... So I have two computers at home. Two Dell Desktop computers running Windows XP. Both have USB wireless network adapters. I don't own internet (Don't shun me. My fam...


Hi,
although I don't support IP Pirates(if they can afford not to be). there is one trick that may help but not if the security on the router is strong as they can set it to only hand out 1 number. However if you know the IP(192.168.0.2) that is being handed out. then you can manually set the wireless adapter on the second system to have an IP that is +1(192.168.0.3) (instead of a DHCP setting)of the number you are given. make sure the gateway and subnet mask is exactly as is handed out to the first system.
you can easily view this info. from a command prompt and typing:ipconfig /all

GL
hope this helps

Don't forget to vote for me
Thank You
Jammer

Aug 17, 2011 | Dell Inspiron 530s Desktop Computer

1 Answer

I have a nintendo 3DS and I want to know how to use the internet on it. I have the internet wi-fi connections set but when I tap the internet logo on the touch screen on the 3DS a message appears and says...


OK, first of all you'll need an internet connection yourself.
Click the options menu and go to "other" (The orange one). Scroll along until you find "system update". Connect to wi-fi and update the system, DO NOT stop it once it's begun as it could harm your data.
Once the system is up to date, click on the blue globe in the top left of the main menu, et voila.
All you really need to do is update the system, so once you've done that all you need is to be near your wi-fi connection and you'll be fine.
Hope this helps, even if it is a little long winded =P
(NOTE: It won't be able to play videos like on youtube for some reason or other... nothing you can do but wait and see if Nintendo will update browsing capacity...)

Jul 22, 2011 | Nintendo 3ds Handheld Game Console- Cosmo...

1 Answer

My SerifDrawPlus X3 reboots unexpectedly after I apply image effects to an image...reads "program closing windows 7 is trying to find solution to this problem" - can you help?


This could mean your PC overheated, had a error or another problem causing Windows to force it to shut down. Is the fan in your PC working right? If it isn't working (correctly), buy a new one. If you don't know how, here's a good guide how to. If it is working correctly, a error might caused it. If so, Windows 7 will find a solution for it. Check the white flag next to the internet and volume icons. If these to are not the case, your PC might doesn't have enough memory to hold image effects and too less RAM (Memory) could cause a unexpected shutdown. Don't hesitate to ask me more! Thanks for using FixYa, and have a great day.

Jun 04, 2011 | Computers & Internet

Not finding what you are looking for?
Sylvania G-Netbook Logo

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Sylvania Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...