I'm missing parts on stand that hold TV up. (metal brackets)

Contact the retailer. They may have a solution.

Go back to the retailer.

I tried all of your suggestions, to no avail. I contacted the manufacturer and they haven't made this TV stand for several years. I guess I'll have to think of a way to hold the glass shelf up another way.

Universal "Jimmy stand" for just about any TV available at Walmart or other places. They're 70 to 90 USD though. They include wall mount or a base to set the TV on a table or other surface. Search
sj-Stand-3755BB If you have parts missing on the manufacturer's one, good luck finding those, they typically come as a unit.

You can get to find alternative mounting by visiting any hardware store. Please find some tips from the link below with which it can be mounted to be fixed on the table or rack.

http://www.regencyproducts.co.uk/

http://www.espares.co.uk/parts/tv-and-audio/lcd/plasma-brackets/p/1459

Most flat panels have a plastic cover that hides the bracket screws holding the base onto the back of the unit. Check to see if you can squeeze the plastic and make it unsnap from the back of the TV. There should be 4-6 screws holding bars of metal, likely two, that hold the base onto the TV. Some have a snap-in base, but most use screws.
tom

The cheapest I have found is Videosecu Dual Arm TV Wall Mount Bracket for Sony Bravia 32 37 40 42 46 50... on amazon. I hope this was helpful. regards

It sounds like the controller is bad. Try unpluging the tv and restart after a couple minutes. What happens after you go from an HD product and switch to regular TV? There are codes to input via the remote to run diagnostics but I haven't had any luck as of yet. Could you check for a part on the back of your TV? Im looking for a part # for the metal part that screws into the back of the TV, that holds the tv on the stand. I have the stand but lost the bracket. Any help would be nice. Thank you, John

to remove base from insignia tv
1)remove plastic cover from bottom rear of tv
2)remove 8 philips head screws on rear of tv above base
3)pick up tv and base will come off

once you remove it you realize how easy it is