Question about Washing Machines
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
F17- covers the following problems supply hose kinked/jammed, clean filter, water pressure too low
Posted on Nov 28, 2010
Testimonial: "Thank u for your advice I think the pipe is frozen."
Sounds like user interface board. Try unplugging the machine, press power button for 3 seconds, plug machine back in and try again. If this does help, it will probably be a temporary fix. The user interface board is the one mounted directly to the console.
Posted on Sep 25, 2007
SOURCE: Washing machine problem
my w830 is doing exactly the same thing.
I am usually pretty good at fixing these sort of things so if/when I solve it I will post back here.
I think it is a motor fault - most likely the motor brushes are worn out.
Posted on Aug 07, 2008
Hi, I have a Siemens WXL166AGB washing machine that has started jolting violently when on the spin cycle, as if something is out of balance, never getting fully up to speed. Subequently it cuts short the spin cycle and leaves the clothes wet. Any idea what it could be. Thank you, Phil Vanes
Posted on Dec 10, 2009
My old Bosch only had a filter in the machine (where the hose attaches. My Exxcel has a filter IN THE HOSE at the tap end too. I removed that one and it made a big difference !
Posted on May 07, 2010
Tips for a great answer:
Sep 02, 2016 | Siemens IQ-300 WM12Q390GB White 598 mm...
Aug 28, 2016 | Siemens Washing Machines
May 26, 2016 | Washing Machines
Dec 08, 2013 | Washing Machines
Aug 01, 2013 | Washing Machines
F17 indicates no water coming into the condensing chamber during drying.
Unplug the appliance.
Take the top off.
Check to see if the condensing chamber below the heating chamber is blocked.
Oct 15, 2012 | Siemens Washing Machines
Dec 09, 2011 | Siemens Washing Machines
Jan 25, 2011 | Siemens Washing Machines
Sep 18, 2010 | Siemens WFXD8400UC Front Load Washer
421 people viewed this question
Usually answered in minutes!