Question about Apple iPod touch

1 Answer

Ipod is disabled and cannot connect to itunes as have new laptop

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 116 Answers

How to restore iPod

  1. Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
  2. Download and install the latest version of iTunes if necessary.
  3. Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
  4. After a few moments, your iPod will appear in the Source panel in iTunes.
  5. Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
  6. Click Restore.
  7. If you are using a Mac, you will be asked to enter an administrator's name and password.
  8. A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    • Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    • Leave iPod connected to computer to complete restore (typically applies newer iPod models).
  9. During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
  10. After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.

Posted on Apr 03, 2011

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 13433 Answers

SOURCE: 8GB iPod Touch Disabled

First you need to read this page and follow the instructions on settings the touch into recovery mode

http://support.apple.com/kb/HT1808

ones in recovery mode you can remove the code by restoreing the ipod with itunes heres how


Restore

  • Note: Because Restore erases all of the songs and files on iPod, make sure to back up any files you've saved on the iPod disk. All of your songs, videos, podcasts, audiobooks, and games can be loaded back to your iPod provided that you have them stored in your iTunes Library.

How to restore your iPod:
For Windows:
  • 1. Make sure you've reinstalled the latest version of iTunes.
  • 2. Open iTunes, and then connect your iPod to your computer.
  • 3. After a few moments, it will appear in the source list in iTunes.
  • 4. Select your iPod in the source list and you will see information about it appear in the Summary tab of the main iTunes windows.
  • 5. Click the Restore button. You will be prompted with one or more restore options that may prompt iTunes to automatically download of the latest iPod Software. The 4 possible restore options are:
    • Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
    • Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
    • Restore Option 3: Use Newest Version - Restores with the latest iPod Software on your computer.
    • Restore Option 4: Restore and Update - Restores with the latest iPod Software on your computer.
  • 6. A progress bar will appear on the computer screen indicating that the first stage of the restore process has started. When this stage is completed, iTunes will instruct you to leave iPod connected to your computer to complete restore.
  • 7. During the stage 2 of the restore process, the iPod will show an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remains connected to the computer or iPod Power adapter during this stage. Note: The progress bar may be difficult to see since the backlight on the iPod display may be off.
  • 8. After stage 2 of the restore process is complete and the iPod is connected to the computer, the iTunes Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences similar to when you connected your iPod for the first time.

Posted on Aug 27, 2008

  • 2 Answers

SOURCE: i forgot the passcode for my itouch and it say it is disabled

Try the password 0000

Posted on Jan 08, 2009

ipodslinger
  • 688 Answers

SOURCE: 8GB iPod Touch Disabled

you will have to restore your ipod to factory default settings in itunes.
or you can jailbreak the ipod with software like quickpwn.

Here is how to restore your ipod in itunes.
You will need to put the itouch in DFU/Recovery mode to get it to connect.

Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Plug the usb cable into the Ipod and NOT into the computer.
Hold the Home Button down for 5 second (do not release it)
Then Press and hold the Power Button for approx 10 secs (count them out)
Your iPod will reboot.
Release the power button and continue holding the Home button for an additional 27secs.
You may see the screen go blank or not.
Plug the USB end into the computer with itunes open.
Your ipod will mount in recovery mode.
Restore it and Your all set.

if you need any further help let me know.
Good Luck

Posted on Jun 01, 2009

anujtaluka
  • 392 Answers

SOURCE: ipod disabled won't connect to itunes

  1. Power off the device (Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPod touch to turn off.
  2. Press and hold the Home button while reconnecting the USB cable to iPod. When you reconnect the USB to iPod, the device should then power on. 
  3. Continue holding the Home button while iPod starts up. While starting up, you will see the Apple logo.
  4. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message:
  5. Restore and it'll download ~240mb firmware and you're done
But you will lose all your data  

Posted on Sep 21, 2009

bahratt
  • 561 Answers

SOURCE: ipod touch is disabled itunes won't connect says

If you have forgotten your iPhone’s Passcode you will need to restore your phone via iTunes.

1. First you have to put your phone into the restore mode which is a slightly fiddly process.
2. Plug your iPhone into your PC or Mac with the USB cable
3. Press and hold the power button at the top and then slide to power off the iPhone
4. Press the power button to power the iPhone on and keep it held while simultaneously pressing the home button
5. After a few seconds a yellow alert triangle will appear and the iPhone will say it is iPhone Restore Mode.
6. Open up iTunes and click on the Summary tab
7. Click on Restore to restore your iPhone. This will reset all your iPhone’s setting to the factory defaults, including the Passcode.

You should then follow these steps below to activate the passcode again.

  1. Click the Home button to bring up the main menu
  2. Click on Settings
  3. In the Settings screen click on General
  4. In the General screen click on Passcode Lock
  5. This will open the Set Passcode screen. Enter a memorable 4-figure code and re-enter it when prompted
  6. You will now be at the Passcode Lock screen. You can change when you are prompted to enter the Passcode. The default setting – Immediately – means you will be asked to enter it as soon as your start using the iPhone. But you can change the setting so that the prompt appears after a certain period of use
  7. Press the Home button to return to the main menu.

Posted on Jan 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a gen 1 ipod touch which is disabled i have forgotten password and have a new computer with new verison of Itunes I have tried everything to enable ipod with no luck. Please help


Open itunes, connect your Ipod to the computer with the USB cord, a message will come up saying "iTunes could not connect to the ipod because it is disabled/locked with a passcode". press cancel. Unplug your ipod from the USB cord.
Now shut down the ipod, hold in the home button at the bottom and connect the USB cable back up, keep holding the home button down and you will see a picture of a USB cable and iTunes on your ipod screen. iTunes will say it has detected an ipod in recovery mode and would you like to restore it to factory settings? Click restore and sit back for a few minutes until it restores everything to factory settings. Your ipod will reboot and iTunes will detect it. You can then go into the ipod and install a new pass code if you wish to.

Hope this helps,
Rob

Sep 07, 2011 | Apple iPod touch

1 Answer

I have an 8 gb ipod touch that is now disabled because I can't remember the 4 digit code. The message on the ipod's screen says 'ipod is disabled. Connect to itunes.' The computer that I originally used...


connect your ipod to itunes and then click on your ipod. then click on updater and your ipod should be good as new.
this process is all on the computer.

May 20, 2010 | Apple iPod touch

1 Answer

My ipod touch is disabled and i dnt know what to do. i wanna know how to fix it when i turn on my ipod it says ipod disabled connected to itunes


connect your ipod to itunes. and then on the computer, click on your ipod ( a label on the left side) and then click update and then your ipod should be good as new.

Apr 04, 2010 | Apple iPod touch

1 Answer

My ipod is disabled and is telling me to itunes. is there any way i can fix it using the iTunes in the internet explorer?


If your iPod has the 'Connect to iTunes' symbol, you will need to connect it to a computer running the iTunes software. You can't just use the iTunes website to do this. Once you connect it, iTunes will perform the necessary steps to fix or activate (if it's new) the iPod.
iTunes is available from http://www.apple.com/itunes/download/

Dec 31, 2009 | Apple iPod touch

3 Answers

Ipod is disabled connect to itunes


Go on to itunes and plug your mp3 in to your computer
and download it and salect which tunes you want. If it dose not work
there is somethind wrong whith your mp3

Aug 19, 2009 | Apple iPod touch Second Gen (8 GB,...

2 Answers

8GB iPod Touch Disabled


you will have to restore your ipod to factory default settings in itunes.
or you can jailbreak the ipod with software like quickpwn.

Here is how to restore your ipod in itunes.
You will need to put the itouch in DFU/Recovery mode to get it to connect.

Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} Plug the usb cable into the Ipod and NOT into the computer.
Hold the Home Button down for 5 second (do not release it)
Then Press and hold the Power Button for approx 10 secs (count them out)
Your iPod will reboot.
Release the power button and continue holding the Home button for an additional 27secs.
You may see the screen go blank or not.
Plug the USB end into the computer with itunes open.
Your ipod will mount in recovery mode.
Restore it and Your all set.

if you need any further help let me know.
Good Luck

Jun 01, 2009 | Apple iPod touch

1 Answer

8GB iPod Touch Disabled


Hey,

read this page i posted
http://www.fixya.com/support/r977231-disabled_or_code_forgotten
Let me know if you need anything else.


Thanks,
Ekse

Jan 20, 2009 | Apple iPod touch

17 Answers

8GB iPod Touch Disabled


Thanks to everyone who provided solution inputs. I finally have my iPod back. The solution is: 1. Turn of your iPod. 2. While holding down the 'Home' button, connect to iTunes WARNING: Doing this will return your iPod back to original 'out of the box' settings and you will lose everything. On the bright side, you get a 'fresh' start and it will auto update to the most recent software version. Good luck!

Jul 14, 2008 | Apple iPod touch

2 Answers

Ipod is disabled


Hold sleep and home button for ten secs (or until you see recovery mode screen) then connect to itunes

May 18, 2008 | Apple iPod touch

Not finding what you are looking for?
Apple iPod touch Logo

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

TO Lady

Level 3 Expert

638 Answers

Are you an Apple Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...