We are trying to set up our belkin adsl modem with high speed wireless-g router, but we cannot get any computers to recognise that it is there, the instruction manual is in the wrong language, can you help?

Hi. Go to www.speedtest.net and select a location from the map. It will test your broadband upload and download speed.

Are you trying to set up the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is not able to go online through the modem then you will need to call ISP first.
If your computer is able to go online through the modem
then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

If the Internet light is off then there is a problem with the phone line to the ADSL modem or the modem is faulty or there is a problem at the telephome exchange.
Disconnect the phone cable at the ADSL modem and connect a phone handset to this cable - check for a dial tone and that you can dial out.
If you don't get a dial tone, use a different or new phone cable.
If the phone line is OK then : -
Ring your ISP to get them to test your connection to your ADSL
modem.

There is a stor in Colac that can fix that it is called itec

• this problem can be ISP releted they may have some issues on the ADSL line connection
  

no you cannot have 2 modem/routers, only another router

Turn off your modem and your router. Turn your modem back on wait for 2 mins then turn on your router. Try to connect. If that does not work. Connect your computer to the ADSL directly and check if you can get on. if not call your ISP.

when you upgraded did any settings from your isp change like passwords or usenames that your router may not be registering at your isp's server, or the line speed that you are now getting is not suported by the router.

 

type 192.168.2.1 in your web browser and check the connection settings. 

You actually have a couple of issues here. Fix these in this order. 1.) Login to router and turn off wireless (if you're not wanting to use wireless) 2.) Connect the ADSL modem CAT5 port to the WAN port of the Belkin router. 3.) Login to router and turn on NAT and make sure DHCP is enabled. 4.) On your Windows machine turn on DHCP under the network settings. This should allow your connection to be setup automatically and stop wireless access on the Belkin router. Let me know if you need more help. JC