When i start my Wap it shows me "invalid gateway ip" ..someone help me pls !! tnx

but when i am going to install it the phone says "invalid network pin". please help :)

then first go to memory settings ->default memory ->put all respective browser memories to memory card...like wap downloads etc.

my Problem is when i open my WAP. say's "invalid gateway IP" please help me..

Hi..i am providing you with the WAP and other settings,but still if you need any help,then please contact Cingular at 866.CINGULAR(866-246-4852)

For CSD (Wireless Internet)
Function Setting
Settings Name: Cingular Wireless Internet
Home Page: http://device:home or http://device.home
Session Mode: Permanent
Connection Security: On
Dial-up Number: 14152441012
Gateway IP Address: 66.209.11.61
Authentication Type: Secure
Dial Type: ISDN (on network)
Analogue (off network)
Login Type: Automatic
User Name: [email protected]
(All upper case)
Password: CINGULAR1
(All upper case)

For GPRS (Wireless Internet Express)
Function Setting
Settings Name: Cingular Wireless Internet Express
Home Page: http://device:home or http://device.home
Session Mode: Permanent
Connection Security: On
APN: wap.cingular (lower case)
PDP_Type: IP
Gateway IP Address: 66.209.11.61
Authentication Type: Secure
Login Type: Automatic
User Name: [email protected]
(All upper case)
Password: CINGULAR1
(All upper case)

Now to set up MMS (Multimedia Services)
Name: MMS
Homepage: http://mmsc.cingular.com
Gateway IP 1: 66.209.11.61
Port 1: 9201
Domain 1: (blank)
Service type 1: WAP
Gateway IP 2: (leave alone)
Port 2: 9201
Domain 2: (blank)
Service type 2: WAP
DNS 1: (leave alone)
DNS 2: (leave alone)
Timeout: 10 minutes
CSD No.1 14152441012
Username 1: [email protected]
password: CINGULAR1
Speed(bps): 9600
Line type 1: ISDN
CSD No.2: (blank)
User Name 2: (blank)
Password 2: (blank)
Speed(bps)2: 9600
Line type 2: ISDN
GPRS APN: wap@cingular
Username: [email protected]
Password: CINGULAR1

Good luck :-)

The best way is to call your carrier and get them sent to your phone automatically. To enter them manually:
T-Mobile Browser/Java Settings:

Connection name: T-Zones
Gateway IP address: 216.155.165.050
Secondary IP address: Blank
APN name: wap.voicestream.com
Data bearer: GPRS
Profile name: GPRS
Username: Blank
Bearer: Data
Home page: http://wap.myvoicestream.com

T-Mobile MMS Settings:

WAP Gateway IP Address: 216.155.165.050
APN Name: wap.voicestream.com
Homepage or MMSC URL: Messaging Server: http://mms.msg.eng.t-mobile.com/mms/wapenc
Data Mode: Connection Oriented

AT&T Browser/Java Settings:

Connection name: Internet GPRS
Data bearer: GPRS
Access point name: wap.cingular
User name:
Prompt password: No
Password:
Authentication: Normal or Secure
Gateway IP address: 66.209.11.61
Homepage: http://device.home
Connection security: Off
Session mode: Permanent

AT&T MMS settings:

Connection name: Multimedia
Data bearer: GPRS
Access point name: wap.cingular
User name:
Prompt password: No
Password:
Authentication: Normal or Secure
Gateway IP: 66.209.11.61
Homepage or MMSC URL: http://mmsc.cingular.com
Connection Security: Off
Session Mode: Permanent

Try http://192.168.0.1 - you don't enter www. in front of an IP. Check that this is actually your routers IP address by doing Start > Run. Type "cmd" without the quotes and press Ok. In the black window that pops up, type "ipconfig" without the quotes. You'll see something like this:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\root>ipconfig

Windows IP Configuration


Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.0.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

Ethernet adapter Local Area Connection 2:

Media State . . . . . . . . . . . : Media disconnected

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected

C:\Documents and Settings\root>

If your Default Gateway Value is 192.168.0.1 then you're good to go, otherwise this value will be what your routers address will probably be.

try using setting wizard to configure your gprs setting.hope this'll help.

you will need to get these settings sent to your phone from your phone network service provider, thats the only way to fix, call your phone network and ask them you need your wap settings sent to your phone ok, they will ask you some details and away you go.

Go into wap settings in your phone and add new connection and use these settings.

Fill in the following fields: (some of the fields may already be setup)

Name: mMode
Homepage: http://home
Service Type 1: WAP
Gateway IP 1: 10.250.250.250
Port 1: 9201
Domain 1: <leave this blank>
Service Type 2: WAP
Gateway IP 2: 000.000.000.000
Port 2: 8080
Domain 2: <leave this blank>
DNS 1: 000.000.000.000
DNS 2: 000.000.000.000
Timeout: 5 minutes
CSD No. 1: <leave this blank>
User Name 1: <leave this blank>
Password 1: <leave this blank>
Speed (Bps) 1: 9600
Line Type 1: ISDN
CSD No. 2: <leave this blank>
User Name 2: <leave this blank>
Password 2: <leave this blank>
Speed (Bps) 2: 9600
Line Type 2: ISDN
GPRS APN: proxy
User Name: <leave this blank>
Password: <leave this blank>

Hopefully you mean the south of the USA if so here you go

GPRS Web Session:
Homepage: http://172.23.1.135:8080/cellularone.wml
Service Type 1: WAP
Gatewap IP 1: 172.23.1.252
Port 1: 9201
Service Type 2: WAP
Gateway IP 2: 172.23.1.252
Port 2: 9201
Timeout: 15 minutes
GPRS APN: cellular1wap

MMS Web Session:
Homepage: http://www.openmobilealliance.org/
Service Type 1: WAP
Gateway IP 1: 172.23.1.252
Port 1: 9201
Service Type 2: WAP
Gateway IP 2: 172.23.1.252
Port 2: 9201
Timeout: 15 minutes
GPRS APN: cellular1wap