Question about Car Audio & Video

2 Answers

I have a wiring kit that connetct from the orriginal radio plug tho the new jvc radio and i got a lot of simillar colors when i put the matching colors wires together the radio didn't turn on any help ? i hope u understand my situation. THE WIRING KIT FROM THE ORIGINAL RADIO PLUG : YELLOW . BLACK . WHITE . WHITE black stripes . GREY . GREY black stripes . PURPLE . PURPLE black stripes . PINK . GREEN . GREEN black stripes . ORANGE white stripes THE JVC WIRING KIT : YELLOW . BLACK . WHITE . WHITE black stripes . GREEN . GREEN black stripes . PURPLE . PURPLE black stripes . GREY . GREY black stripes . RED . ORANGE white stripes . BLEUE white stripes . BROWN . BLEUE yellow stripes

Posted by on

  • 4 more comments 
  • blackblood_0 Apr 02, 2011

    it is a JVC KD-R620

  • blackblood_0 Apr 02, 2011

    it is a JVC KD - R620

  • blackblood_0 Apr 02, 2011

    still working on it ?

  • blackblood_0 Apr 02, 2011

    it's a JVC KD R620

  • blackblood_0 Apr 02, 2011

    i already have that diagram it came with the radio !!!

  • blackblood_0 Apr 02, 2011

    i have the diagram i connected all the wires like it says on the diagram and it still didn't work
    i want my money back man i can add another 18 $ and get it all fixed by a mecanic and save myself all this work

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 635 Answers

The JVC wiring kit has more cables than the original radio plug. The original car radio has just basic functions, but the JVC has advanced functions . It would have been helpful if you had given the model # of the JVC stereo.
First things first . Connect all the matched colored pairs together eg:- White / Whiteblack , Grey / Greyblack ,Purple / Purpleblack and Green / Greenblack . These are speaker wires .
Next Yellow & Yellow , Black & Black. These are the battery + and Ground ( -). Next connect the Pink and Red wires. This is the accessory connection ( the stereo will play only if the key is inserted )
Rest of the wires you can ignore. For eg: the blue wire is for powered antenna, brown for alarm etc. All these functions your car does not seem to support. Now if the system still does not work , you could have damaged it due to a mix up in the connection. Please make a note of how you had connected the system before my suggestion so we can trace the fault. Good luck.Revert back for further assistance .

Posted on Apr 02, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,530 Answers

Welcome to Fixya

Please provide me the exact model of your radio and i will help you find the wiring diagram.

Thank you for using Fixya!

Posted on Apr 02, 2011

  • Jose Cada
    Jose Cada Apr 02, 2011

    Please check this link.

  • Jose Cada
    Jose Cada Apr 02, 2011

    the link i gave you is for KD-R620/KD-R628 and KD-A625

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install jvc kw-xs68 radio in a Pontiac 2005


But the harness and kit from auto parts or from best buy then just match colors on radio and plug harness from old radio into new harness

Sep 21, 2014 | Car Audio & Video

1 Answer

Wiring diagram for a 2000 chevy venture and a jvc stereo


It is impossible to know without more information, but purchasing an adapter is the easiest thing to do. You can even find them at most Wal Mart stores. This will plug directly into the factory radio wiring letting you make the connections to the radio without cutting up the van wiring. Connecting the adapter to the radio is usually matching colors and makes the job easy.

Mar 08, 2013 | Cars & Trucks

1 Answer

I have a 97 toyota corolla, my father had givin me his old radio, earlier today my car radio lit on fire almost torching my dash board, im a trained firefighter so i know how to put it out. unfortunatly im...


OK, first I recommend you purchase a wiring harness specific to the vehicle. The wiring harness is equiped with standardized wire colors to match aftermarket radios. Then the harness plug situates the wires in the correct pattern to match the vehicle. All you do then is plug it in. You will probably need a trim panel too. I recommend you check out www.crutchfield.com, they have the harnesses, dash kits, and instructions. Hope this helps.

Aug 29, 2011 | Car Audio & Video

1 Answer

I just bought a new kw-AVX740 radio and i have a 01 mustang and i don't really no how to install it


first and foremost you need to buy a car audio installation kit for your car model and year. Wal mart has some, but i think you may need to drive down to your local car audio shop and buy one from them if wal mart don't have them. Remove the old/factory radio. If an aftermarket radio is already installed then you may get lucky and find the harness already installed, but depending on what kind or radio it is( ex: DIN or Double DIN), but the specs for your radio is Double DIN(fat) so you may still need to buy the installation kit. Once you have the kit, everything is color coded, just match the wires and connect, then plug the harness after you have secured the wires. For a clean professional installation look, solder your wires(60/40 solder and soldering iron needed) and seal the connection with a heat shrink tube(audio shop carries the tube as well) and your good to go. I found you the install manual, just copy and paste(make sure all wires are connected with keys off the ignition until everything is good and connected)
http://resources.jvc.com/Resources/00/01/50/LVT2173-002A.pdf

Jul 14, 2011 | JVC Car Audio & Video

1 Answer

How do you hook up a jvc kd-s580 to a 91 ford explorer


Get a wiring plug kit. These are available at any Walmart. They are specific for your vehicle make and not the radio. Radio manufacturers typically use all of the same colors so this should be a matter of matching color to color straight forward. Double check this with yoru radio manufacturer schematic before applying power to the radio.

Here is the wiring diagram for your truck

Jan 20, 2010 | JVC KD-S580 CD Player

1 Answer

My factory radio went out in my car...so i had a new one put it in. After the guy installed the radio we noticed that my park lights and dash lights werent working. We checked the fuses and they were all...


I really hope that this guy bought a wiring kit to put in the aftermarket radio, because this could be simple. Your stock radio runs the dash and parking lights threw it's display and that needs to be looped with the new radio. On the aftermarket, there is a orange wire that does this. Since the stock wiring is different with every make and model of auto out there, you need to buy the wiring kit that plugs into the car's harness and matches in color to the harness of the new radio. Putting together the orange wires will give you back your lights. If this person cut the orginal plugs off of the car and wired it direct to the car, you may want to see if the plugs can be put back on and the wiring kit installed or you going to be going through a nightmare of figuring out what wire is what on the car side. Those wiring kits that plug into the car and wire up to the radio are cheap and can be bought at Wal Mart for about 20 to 25 dollars. Good luck

Aug 09, 2009 | 1999 Honda Accord

1 Answer

Need color codes for new radio to 99 nissan sentra


Hello jmartinatl,

The color codes for your receiver is here.

Just match the function of each wire the the appropriate wire on your vehicle. Or better yet, purchase a vehicle specific aftermarket wiring harness that plugs into the vehicle wiring.

Hope this helps.

Jul 24, 2009 | JVC KD-G200 CD Player

1 Answer

I have a 1988 chevy astr van and need to know how


The easiest way is to purchase an installation kit that is matched to your vehicle, and comes with a pigtail plug that inserts directly in to your existing radio connector, and the pigtail wires match up color for color to your new unit 

Feb 23, 2009 | Kenwood KDC-MP238 CD Player

1 Answer

Wiring my jvc kd-g331 to a 1996 vauxhall corsa


You can go to a place that installs car stereos and purchase a universal wiring harness for your car that will cost about $15 and allow you to do the wiring very easy without the need to know what every wire is for. This harness would be wired to the harness you got from JVC for your new radio and all you need to do is to match the colors of the JVC harness to the same colors of the universal harness that would then just plug right into the factory wiring harness for your car and then the other end plugs into the connector for your JVC radio. It is very easy and insures that you have all the proper wires connected to operate your radio and have full functions available for use.

If you require to know what each wire from the JVC harness is for, just ask.

I would be happy to offer you more help if you need it, just reply to this post and I will get back to you as soon as I am able.

If you found this free information to be useful a FixYa! rating would be appropiate and very much appreciated. After all, it is the only reward we get for helping people like yourself for free.

Thanks and good luck with your radio installation,

Dave

Sep 04, 2008 | JVC Car Audio & Video

1 Answer

Installing a new car radio


if you have a wiring harness al the wires are color coded to match the after market radios colors. the yellow constant wire goes to 12 volt or battery wire. the accessory wire would be the red wire that is the switched 12 volts. the remote is for the factory amp or an aftermarket amp which turns on and off it would be the blue with white wire.

May 28, 2008 | JVC KD-SX990 CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4861 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

The Knight
The Knight

Level 3 Expert

74244 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...