Question about SharpVision XV-Z9000U Multimedia Projector

1 Answer

I have replaced the lamp on my Sharp XV-Z9000U projector , and have done the reset procedure several times, holding down the prescribed buttons simultaneously, and still no fire up. Blue blinking light at lamp indicator.

Posted by on

  • Gjast Apr 02, 2011

    Is there another reset button or procedure , besides the 4 buttons all at once?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 442 Answers

Is the lamp cover on properly

Posted on Apr 03, 2011

Testimonial: "I do not recall a message to replace the bulb. It just did not fire up one day and I assumed it was the bulb. I have tried the power un-plug several "

  • Gjast Apr 03, 2011

    I have triple checked and re-installed the lamp several times, and pushed the four buttons simultaneously, numerous times. Lamp door is secure. Still no action.

  • Greg Heath
    Greg Heath Apr 04, 2011

    OK so you have done the "While holding down ENTER, DOWN arrow and RIGHT arrow, then press POWER ON thingy.

    The following may not be relevant, so please ignore if so.

    "If the power is turned off and then turned on again, for example during a brief rest, the LAMP REPLACEMENT indicator may be triggered, preventing the power from going on. Should this occur, unplug the power cord from the wall outlet and plug it back in again."

    I am presuming that you changed the lamp because it said you needed to, is that correct?
    Or did the unit just stop working and you decided to change it anyway.
    I'm thinking that the ballast circuit that controls the lamp may have failed.

    Since the lamp indicator is blue and not red, I'm not certain.
    Why not send an email to lcdsupport@sharpsec.com
    and see what they have to say.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp projector timer unable to reset after replaced lamp.


Reset the lamp timer.
1,Connect the power cord.
2,While simultaneously holding down "menu","enter" and "down" on the projector, press "standby/On" on the projector and keep all four buttons pressed down until the lamp indicator starts blinking green.
"LAMP 0000H" is displayed, indicating that the lamp timer is reset.

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

Mar 07, 2015 | Sharp XV-Z9000, XV-Z9000E, XV-Z9000U...

1 Answer

I am unable to reset the timer after replace projector lamp- there are no screen. How to reset the timer?


Reset the lamp timer.
1,Connect the power cord.
2,While simultaneously holding down "menu","enter" and "down" on the projector, press "standby/On" on the projector and keep all four buttons pressed down until the lamp indicator starts blinking green.
"LAMP 0000H" is displayed, indicating that the lamp timer is reset.

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

Mar 07, 2015 | Sharp XV-Z9000, XV-Z9000E, XV-Z9000U...

1 Answer

I replaced the lamp on my Sharp Projector xv-z10000 and have tried to reset several times by holding down the down arrow, right arrow and enter button at the same time and then push the "on" button but the...


If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/
Lamp time reset procedure to many popular brand projectors are given.

Apr 19, 2014 | SharpVision XV-Z10000U Multimedia...

1 Answer

Reset sharp xv-100 timer


Reset the lamp timer.
1,Connect the power cord.
2,While simultaneously holding down "menu","enter" and "down" on the projector, press "standby/On" on the projector and keep all four buttons pressed down until the lamp indicator starts blinking green.
"LAMP 0000H" is displayed, indicating that the lamp timer is reset.

Mar 05, 2012 | Sharp (CLMPF0053DE03) Projector Lamp for...

1 Answer

I have a Sharp xv-z9000u projector. I recently replaced the lamp; however, I cannot turn the projector on. how do I reset the lamp timer?


While pressing down arrow, right arrow and ENTER on the projector, press POWER ON on the projector.



"LAMP 0000H" is displayed, indicating that the lamp timer is reset

Jun 04, 2011 | SharpVision XV-Z9000U Multimedia Projector

2 Answers

I have a sharp projector xv-z9000u. I replaced the lamp and now I cannot turn on the projector. What should I do?


there may be a reset button some were on the projector you have to look real good, i do know that some projectors when you replace the light bulb you have to push the reset button than it should turn on.

Jun 04, 2011 | SharpVision XV-Z9000U Multimedia Projector

1 Answer

XV-Z10000I change the lamp with a new one it doen't turn on ofter replacing with the bulb, does it need rest and how can be done Thanks Zia


Reset the lamp timer.
1,Connect the power cord.
2,While simultaneously holding down "menu","enter" and "down" on the projector, press "standby/On" on the projector and keep all four buttons pressed down until the lamp indicator starts blinking green.
"LAMP 0000H" is displayed, indicating that the lamp timer is reset.

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

May 18, 2010 | Sharp BQCXVZ100001 Projector Lamp for...

1 Answer

Lamp life over 2000. can't turn on again after replaced


sharp xv z9000u bulb reset
Hold down Enter + down arrow + right arrow and then power on.

Mar 13, 2008 | SharpVision XV-Z9000U Multimedia Projector

5 Answers

Won't power up


I had the same problem after I replaced my lamp. You need to hold down the:

On
Enter
Down Arrow
Right Arrow

simultaneously - this resets the lamp counter. After I did that my projector fired right back up.

Nov 22, 2007 | SharpVision XV-Z9000U Multimedia Projector

Not finding what you are looking for?
SharpVision XV-Z9000U Multimedia Projector Logo

Related Topics:

316 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

255 Answers

k24674

Level 3 Expert

7993 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...