Question about Hotpoint 18 in. DC28 Slim-Line Built-in Dishwasher

1 Answer

Hotpoint 800 de luxe 9526

HI
Cant find any info on the above machine, what i need is to clean the filter, but cant find it.
Cheers
Rob

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,462 Answers

At rear of machine, remove the small panel at bottom. you will see a large diameter hose going from bottom of machine to the pump. remove this hose at the machine end and the filter is inside. take out and clean. careful - water will come out is machine has not drained
best to disconnect from mains of course

Posted on Aug 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fdw fault eco and fast flashing


I had a hotpoint engineer try to fix this type of problem.
He insisted that there was something stuck in the bottom of the pump.

Sure enough there was.
1. Unplug your dishwaser at the wall.
2. Remove the grill under the bottom rack.
3. Ensure that the filter is free from food and other obstacles and clean the filter.
4. Before replacing filter etc, get a piece of metal coat hanger wire and care fully insert it down the channel under the filter to free any lodged items. You may also see a small white impleller try to turn this with your finger or the coat hanger wire (this is the info from the engineer!).
5. replace filter and retry a wash.

This routine fixed or machine twice and will hopefully fix yours!

Don't forget to rate me!

Sep 02, 2009 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Hotpoint dishwasher model BFI62


water leaking into base of machine. tip dishwasher back and drain out water. then check all seals intact, i.e. around arms, around salt holder etc

Dec 23, 2008 | Hotpoint 23 in. BFI62 Built-in Dishwasher

1 Answer

Hotpoint Aquarius DF61 Dishwasher & Food residue remaining


i have cleaned the filter on my hotpoint aquarius DF61 on cant put it back together.

Nov 17, 2008 | Dishwashers

1 Answer

REPLACEMENT BUSHES


i managed to find a lip underneath the carbon bush
lifted it up slightly and slid out the plastic casing to the side
then replaced the new ones

Sep 21, 2008 | Hotpoint 18 in. DC28 Slim-Line Built-in...

3 Answers

FDW60


I had a hotpoint engineer try to fix this type of problem.
He insisted that there was something stuck in the bottom of the pump.

Sure enough there was.
1. Unplug your dishwaser at the wall.
2. Remove the grill under the bottom rack.
3. Ensure that the filter is free from food and other obstacles and clean the filter.
4. Before replacing filter etc, get a piece of metal coat hanger wire and care fully insert it down the channel under the filter to free any lodged items. You may also see a small white impleller try to turn this with your finger or the coat hanger wire (this is the info from the engineer!).
5. replace filter and retry a wash.

This routine fixed or machine twice and will hopefully fix yours!

Please don't forget to rate me!

Jul 12, 2008 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Eco and Fast lights flashing


I had a hotpoint engineer try to fix this type of problem.
He insisted that there was something stuck in the bottom of the pump.

Sure enough there was.
1. Unplug your dishwaser at the wall.
2. Remove the grill under the bottom rack.
3. Ensure that the filter is free from food and other obstacles and clean the filter.
4. Before replacing filter etc, get a piece of metal coat hanger wire and care fully insert it down the channel under the filter to free any lodged items. You may also see a small white impleller try to turn this with your finger or the coat hanger wire (this is the info from the engineer!).
5. replace filter and retry a wash.

This routine fixed or machine twice and will hopefully fix yours!

Don't forget to rate me!

Jul 04, 2008 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Dihwasher not working


I had a hotpoint engineer try to fix this type of problem.
He insisted that there was something stuck in the bottom of the pump.

Sure enough there was.
1. Unplug your dishwaser at the wall.
2. Remove the grill under the bottom rack.
3. Ensure that the filter is free from food and other obstacles and clean the filter.
4. Before replacing filter etc, get a piece of metal coat hanger wire and care fully insert it down the channel under the filter to free any lodged items. You may also see a small white impleller try to turn this with your finger or the coat hanger wire (this is the info from the engineer!).
5. replace filter and retry a wash.

This routine fixed or machine twice and will hopefully fix yours!

Don't forget to rate me!

fyi
The third time about 1 year later this occured again and even hotpoint gave up as they could not fix the machine. (after multiple visits). I think that the two flashing lights are were a red herring and the dishwasher had a separate intermitten fault. Hotpoint replaced the unit for a mimum charge. Callout + 40








Feb 27, 2008 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Odd fault codes then stops working.


I had a hotpoint engineer try to fix this type of problem.
He insisted that there was something stuck in the bottom of the filter or pump.

Sure enough there was.
1. Unplug your dishwaser at the wall. Check its off or disconnected.
2. Remove the grill under the bottom rack.
3. Ensure that the filter is free from food and other obstacles and clean the filter.
4. Before replacing filter etc, get a piece of metal coat hanger wire and care fully insert it down the channel under the filter to free any lodged items. You may also see a small white impleller try to turn this with your finger or the coat hanger wire (this is the info from the engineer!).
5. replace filter and retry a wash.

This routine fixed or machine twice and will hopefully fix yours!

Don't forget to rate me!

fyi
The third time about 1 year later this occured again and even hotpoint gave up as they could not fix the machine. (after multiple visits). I think that the two flashing lights are were a red herring and the dishwasher had a separate intermittent fault. Hotpoint replaced the unit for a mimum charge. Callout + 40.

Dec 31, 2007 | Hotpoint 24 in. FDW60 Free-standing...

Not finding what you are looking for?
Hotpoint 18 in. DC28 Slim-Line Built-in Dishwasher Logo

Related Topics:

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

bosch5

Level 2 Expert

157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...