Question about Audio Players & Recorders
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
first you need a multimeter set to OHM , check on the back of the horn , remove the leads and do some reading , it should read 4 , 8 , 16 ohms depending of the brand , if you get no reading its means that need to be replaced , some horns you can detach the back (magnet w/the coil ) so you can replace it without buying the whole unit . good luck
Posted on Apr 19, 2008
SOURCE: reg: Cerwin-Vega! 250SE 125 watt
i had the same problem & got them fixed at a professional audio place in town & now my speakers are like new. They will last me another 10 years. I suggest you have them fixed by a professional.
Posted on Aug 25, 2008
Just get a 12" sub box enclosure for an audio store near you or make a custom box, a larger box supposedly gives you more bass yet at the cost of boot space. I have a type R sub and the box is only as big as it needs to be for the sub to fit and it gives amazing bass.
Posted on Aug 05, 2009
Hi there, If can you give me an average dimension of your trunk your installing it in. And Ported - Sealed is really based on what you are trying to achieve in the vehicle. Ported in my opinion sounds better in cars with an enclosed trunk where as a sealed subwoofer plays better in a hatchback vehicle where the car itself acts as a second box.
Posted on Nov 16, 2009
We will start with the easy one, Phase. The phase selector is a setting that can be adjusted by sound; which one sounds better? Either one will work fine. It's mainly for situations where the sub enclosure is located at a distance or behind the listening area. The 'in and out' crossover selector and the input from the receiver goes together. The 'in and out' crossover selector is asking if you want to use the internal crossover to block the bass from getting to the satellite speakers. Most home surround sound receivers only have the one sub out and most subs have both left and right inputs. When there is a single signal being fed to the sub you use the subs left input or buy a splitter and send the signal into both left and right, but either way will work equally the same.
There is two ways to connect the speakers to the receiver.
1) Cross-over 'In': you connect the output speaker wires from the receiver to the speaker inputs on the sub and the speaker outputs on the sub to the satellite speakers; the sub will get its sound from the input speaker wires.
2) Cross-over 'Out': you connect the sub to the receiver using the receiver's single sub out, then connect the satellite speakers directly to the receiver's speakers outputs; in this configuration the satellite speakers are given a full range of signal including the bass.
I have used #2 with the same system and had great results.
Posted on Aug 13, 2010
Tips for a great answer:
Mar 16, 2012 | Cerwin Vega Cerwin-Vega E-715 Floor...
Feb 28, 2011 | Audio Players & Recorders
Feb 13, 2011 | Cerwin Vega E-312 Speaker
Oct 03, 2010 | Cerwin Vega E-712 Main / Stereo Speaker
Jun 22, 2010 | Cerwin Vega 2 Channel Amplifier - Vega...
Nov 01, 2009 | Cerwin Vega LW12 Subwoofer
Aug 13, 2009 | Cerwin Vega Stroker 12 Car Subwoofer
251 people viewed this question
Usually answered in minutes!