Question about Cell Phones

1 Answer

We have 3 phones in the house. I want caller ID on each of them. Called AT&T and caller ID appears on only one phone - UNIDEN in the kitchen. Phone on same floor AT&T in living room and AT&T in upstairs bedroom do not show caller ID. I do not have a manual. Have tried unplugging and replugging phones in question, but to no avail. How do I get caller ID to appear on all 3 phones?

Posted by on

  • johno4126 Apr 03, 2011

    Thanks for helping us Mark. The model number on the bottom of the main unit is E59128.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 378 Answers

Unplug the one that gets caller ID and one more. Do you get caller ID on the remaining phone?
Caller ID is sent between the first and second ring, as well as the second and third ring. It may be that the other phones require that 2nd Caller ID signal and you've answered it elsewhere.

I am assuming that the other phones have a display and are Caller ID capable phones.
Can you post the model numbers of the phones that don't get Caller ID? We can then try to locate a user guide for them.

Sincerely,
Mark

Posted on Apr 01, 2011

  • johno4126 Apr 02, 2011

    Mark:

    Thank you for your prompt reply. The ones that are not getting caller ID came as a set. (ATT) They are cordless 5.8 GHZ. The first unit is upstairs and has a large base where all settings are controlled (clock, announce,delete,etc.) The companion, (2nd phone that is included), is
    downstairs and has a very small base (no settings can be made on this base.) Both of these
    phones (master & slave) do not receive the caller id. It only reads incoming call, not displaying
    caller #. However the phone in our kitchen (Uniden) is also a cordless, but is not a part of the above setand not the same company. It is not enabled to answer calls because the master upstairs is answering the calls, and only one phone can answer calls.

    I unplugged the phone in the kitchen, (which is the only phone that displays caller id currently),
    along with the slave that came with the set upstairs. I left the master upstairs plugged in.
    I called our home phone on a cell and still no caller id on the master.

    I plugged the other phones back in and tried again, and still no caller id on the ATT phones.
    Only the kitchen phone downstairs displays our number. The # on the ATT phones that do not display caller id from the set are: SNEM 102235591 - Model 8 E59128.

    Thank-you for your help.

    Mary

  • Mark Compton Apr 02, 2011

    I am unable to find documentation regarding the numbers you've given. On the main unit, is there a model number on the bottom? - Mark

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I retrieve a number from a caller? or can I? I have a UNIDEN DECT 6.0


You have to have caller ID from your telephone service provider, and the caller must not have his/her ID blocked. If both conditions hold, then the caller's number will appear on the display.

Dec 02, 2016 | Uniden Lands Phones

1 Answer

How do I set the time and day on my Uniden hands free phone?


Press MENU/SELECT to bring up the menu. Use up/down to select "Date & Time" and press MENU/SELECT.

If you have caller ID, the first time a call comes in with the caller ID info, the phone will automatically set the date and time.

If you need a manual, you may download a copy here.

Jul 23, 2012 | Uniden Cordless Phone

1 Answer

How do I look at the last number that called


Since you didn't specify the model of your phone so I can't give you a definite answer, but on some Uniden DECT 6.0 phones there's a button marked ID (possibly with a phone icon) that accesses the caller ID list.

Select the model of your phone from the list beginning at
http://www.uniden.com/owners-manuals/dect-phones/scat/dectphones_mnl/
to download the manual.

Jun 15, 2011 | Uniden DECT 6.0 Cordless Phone ID

2 Answers

No called ID


Does the LCD just display "Incoming Call"? if so please list your model number and I might be able to help you further.

Jun 23, 2010 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

UNIDEN TRU8888-CALLER ID DOES NOT WORK


Hi

Thanks for using FixYa. I think you have stored more than 100 Caller ID messages and hence the caller ID is not showing on Uniden Tru8888. In the following cases the caller ID will not be shown-

If you answer a call before the Caller ID message is received (for example, before the second ring), the Caller ID message will not appear.

When the call is received via a telephone company that does not offer Caller ID service, the caller’s phone number and name does not appear. (This includes some international calls.)

When the call is via a private branch exchange (PBX), the caller's phone number and name may not appear.

You may receive any one of the following messages:

When a private name is received; Private Name
When a private number is received; Private Number
When a unknown name is received; Unknown Name
When a unknown number is received; Unknown Number
When invalid data is received; Incomplete Data

The Caller ID list stores information for incoming calls - even unanswered calls. You can store up to 100 Caller ID messages and phonebook entries (including Speed Dials) for each handset and the base. You can view the Caller ID list through the handset or base during a call or when the phone is in standby mode.

Memory locations for Caller ID messages and Phonebook entries (including Speed Dials) are common, you can store up to all 100 entries for each handset and the base. Caller ID messages are not stored when you have 100 phonebook entries. When you have stored a total of 100 phonebook entries and Caller ID messages, the oldest Caller ID message is overwritten.

Please do rate the solution and revert for further assistance.


Thanks
Rylee

Aug 16, 2009 | Uniden Cordless Phone

1 Answer

On my model 8885 uniden phone, when I try to store a # the screen say's memory full. I only have two numbers stored. help


These phones use a "Shared" memory, the CID information and the Phone book information share the same memory chip. If you clean out the caller ID data you should be able to load more numbers in the phone book. Since you have an 8885 I am assuming you have TCX800 or TCX905 handset(s), to clear the CID memory, Follow these steps:

Deleting Information from the Caller ID List
1) When the phone is in standby mode, view the Caller ID
information to be deleted (see "Viewing the Caller ID
List" on page 50).
2) Press the DELETE soft key. De let e C all er ID appears.
3) Press volume up/down to choose Yes.
4) Press the OK soft key. You will hear a confirmation tone.

To delete all the CID information follow these steps:

Deleting all Caller ID names/numbers
1) When the phone is in standby mode, press cid.
Press the DELETE soft key. De let e A ll? appears.
2) Press volume up/down to choose Y es.
3) Press the OK soft key. You will hear a confirmation tone

Mar 27, 2009 | Uniden 5.8GHz Dual Cordless Phone

3 Answers

Uniden CXA15198 not showing caller id


Hi! There is a small device available in the market which is a converter. By connecting this between landline and phone, caller ID start display simply.

It cost to me Rs.450/- made by Fintel. Try to get it cheaper at your place.

Try this and the problem is solved.

Nrupesh

Apr 08, 2008 | Uniden CXA15198 Twin Corded/Cordless Phone

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

William Alequin

Level 3 Expert

928 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...