Question about Sceptre X7GNAGAV 17" LCD Monitor

1 Answer

When i turn it on it comes on and a second or two it goes off.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

Look for bad caps with domed tops first, worst case will be the lamp assemblies.
See my pictures here; http://s807.photobucket.com/albums/yy352/budm/Sceptre%20X7G/

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Posted on Apr 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My toshiba 40ft2u1 will not turn back on


I'm having the same problem right now. I get the green light for about 5 seconds (not Blinking) then the light goes out. No sound or picture.

Apr 05, 2012 | Toshiba Televison & Video

2 Answers

Wont turn on


www.crackberry.com will help, just search in the forums for "recover a dead blackberry"

Jul 30, 2009 | RIM BlackBerry Pearl 8100

1 Answer

The screen goes blank after 5 seconds


Make sure you have the correct drivers install for you video card. Also, check to make sure your resolution is not set to high for you video card. To get to resolution; right click on Desktop > click Properties > press Settings Tab, from there you can move the slider to change your screen resolution (try different resolutions until it doesn't shut off anymore).

Let me know.

Jul 09, 2009 | ViewSonic VG900b 19" LCD Monitor

1 Answer

Screen goes blank after a few seconds


Hi ,
The monitor flicker problem. The monitor when turn on will display image for couple of second then turn black. The monitor status led is still green. This will happen each time it is turn on. The symptom at appear to come from the inverter board.

May 08, 2009 | NEC-Mitsubishi NEC Display Solutions...

1 Answer

Sounds comes onbut for only a sec and goess off


Pioneer Model SDV77 Turns Of immediately Indicates DVD 5.1 CH Error DVD 3.3 Error

Feb 08, 2009 | Pioneer 1000 Watt 5.1 Surround Sound...

1 Answer

I have a denon 1720 dvd player. When you press the power button it comes on for 3 seconds then the power button turns back red and powers off. If you press the eject button within the 3 seconds the tray...


same equql problem....?????

Can you help?



i have a denon 1720 dvd player. When you press the power button it comes on for 3 seconds then the power button turns back red and powers off. If you press the eject button within the 3 seconds the tray opens and the power button stays green. As soon as you close the tray the power agin goes to red. i have a denon 1720 dvd player. When you press the power button it comes on for 3 seconds then the power button turns back red and powers off. If you press the eject button within the 3 seconds the tray opens and the power button stays green. As soon as you close the tray the power agin goes to red. Can you help? thanks thanks

Dec 21, 2008 | Televison & Video

Not finding what you are looking for?
Sceptre X7GNAGAV 17" LCD Monitor Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sceptre Computers & Internet Experts

Robert Veldman
Robert Veldman

Level 3 Expert

373 Answers

methjd

Level 2 Expert

74 Answers

Are you a Sceptre Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...