How to install the spring in the clutch on a 257 husqvarna chainsaw

Please check your question and category. Husqvarna 2600, question about Husqvarna chainsaws.?? This saw doesn't exist.

Tom, Check the attached links,instruction and guides on Husqvarna chainsaw, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Husqvarna rancher 55 chain bolt replacement

http://www.husqvarna.com/ddoc/HUSO/HUSO2002_USen/HUSO2002_USen__1140106-95.pdf

How to Change Chain on Husqvarna Chainsaw Model 445

How to Adjust the Oiler on Husqvarna 55 Rancher

Hi Rick:
Here's the link
http://www.ereplacementparts.com/husqvarna-257-199601-chainsaw-parts-c-114486_114487_114821.html
check page K
Cheers

Husqvarna Chain Brake - YouTube

? 7:13
https://www.youtube.com/watch?v=gK7eKakMCz8
Feb 13, 2011 - Uploaded by thoughtfulace
... brake assembly and install the spring in the cover of ahusqvarna saw. ... Next time I will try to remember to disengage the brake first. .... How to Remove a Chainsaw Clutch Cover and Reset the Chain ... Restricted Mode: Off.

husqvarna chain brake is stuck. easy fix - YouTube

? 6:31
https://www.youtube.com/watch?v=usP5XaXO7-8
Dec 19, 2012 - Uploaded by Plotnikoff Nate
How to fix your chain brake from being stuck locked to unlocked the easy way. ... BTW, I will NEVER sharpen a chainsaw again. This new chain ...

How to assemble the brake spring on a 137 husqvarna ...

www.fixya.com/.../t26010777-assemble_brake_spring_137_husqvarna

The oil pump is behind the clutch. You will see 3 bolts holding the pump in place. Some pumps must use the M5 screws in the 180 degree extractor holes. There is also 2 screwdriver slots you can use to pry out the pump is needed. If the pump lifts out, you are good to go.

The flywheel has an alloy key moulded into it, check the key has not sheared and the timeing is now out,

You can search for the manual, as well as exploded diagrams for your Husqvarna 257 here. Be sure to check PartsBuggy.com for replacement parts.

No points, electronic ignition.
http://www.acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/d23e6e281a4a68ca88256d09001faca0?OpenDocument
Hth
Lou

You can get an IPL here:
HusqvarnaUSA.com
http://www.husqvarna.com/us/homeowner/support/download-manuals/
I don't think this has the detail you need.
If it were me I'd visit my friendly neighborhood Husky chainsaw seller (not Big Box Store) and ask to look at the clutch cover with the brake installed (take a camera). I'd probably ask for a quote for their repair too. HTH
Lou
Your model is no longer sold. The seller will know what model replaced it and may be willing to explain the repair procedure for your saw you. Take the cover and loose parts with you.

there is a spdecial tool but you dont need it. i use small flat screw drivers between drum and shoes and fit new springs with a circlip pliers