Question about Singer CE-100 Futura Computerized Sewing Machine

1 Answer

Transition to machine still pending. How do i cancel it

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 233 Answers

Canceling it takes a few steps, and you may need to do it after each time you do a design. First, close the Futura software on the computer. Then, unplug the USB cord from your machine AND the back of your computer. Also turn off the sewing machine. Do all of this before plugging the USB cord back in. Do that, then turn the sewing machine back on and restart your software. You should be fine.

For whatever reason, your last transmission gets stuck in the "buffer" between the computer and embroidery machine and this will clear it out. It happens to me each time I send a design, and I have to go through this whole song and dance to clear it. Works just fine once I do, though. Good luck!

Posted on Apr 03, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When trying to transmit a embroidery design to machine says there already one waiting how do you cancel the old one


Have you already transmitted a design and it has not finished? You can open several windows at one time, so it's possible that there is a pending transmission. If there isn't, I would close the program and then reopen it. That should have cleared out any previous designs that were transmitted in a session.

Jul 21, 2014 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Cancel a pending transmission


This happens every time I finish a design. First, close thesoftware on your computer. Next, turn off the embroidery machine. Now unplugthe USB cable from the machine and then from the back of your computer. Nowreverse the progress. This will clear the "buffer" between yourcomputer and the machine. It's a bit of a pain to do each time, but it doeswork.

Oct 22, 2010 | Singer CE-200 Quantum Futura Computerized...

1 Answer

When I try to send a design to my Quantum Futura CE-200 I get a message that a transmission to machine is still pending, and I must cancel the pending design before I can continue. I have not used the...


Go to futura-support.com Go to FAQ and go to #7. Follow the procedure EXACTLY, save one thing that is not on there. BEFORE you do anything, make double-sure your machine is set for embroidery (E) and not sewing (S). Even if you follow the procedure exactly, if your machine is on 'S' and not 'E', you will continue to get the 'transmission' message.

May 23, 2010 | Singer CE-200 Quantum Futura Computerized...

1 Answer

How do I cancel a transmitted design. The needle


Turn the machine off and remove the hoop. Reboot the program and turn the machine back on.

Mar 11, 2010 | Singer CE-200 Quantum Futura Computerized...

1 Answer

Cancel previous transmition


This happens every time I finish a design. First, close the software on your computer. Next, turn off the embroidery machine. Now unplug the USB cable from the machine and then from the back of your computer. Now reverse the progress. This will clear the "buffer" between your computer and the machine. It's a bit of a pain to do each time, but it does work.

Sep 21, 2009 | Singer CE-100 Futura Computerized Sewing...

1 Answer

Canceling a transmission


By switching sewing machine off.
But if you are talking about message "A transmission to machine is still pending..." you need to update your software.

Aug 20, 2008 | Singer CE-200 Quantum Futura Computerized...

2 Answers

Frustrated!!


It may be faster and easier to contact your local Singer dealer, or Singer HQ in your country........they will want you to have a good experience with their product, even if it was second hand.....if there is a problem with the machine, they may even suss it over the phone for you.

Jun 09, 2008 | Singer CE-100 Futura Computerized Sewing...

3 Answers

Transmition of new design


We had the same problem tonight. It was the first time we tried the machine and we wre quite upset. The help file and manual were of no use. I disconnected the USB cable.I then opened the "tile view" under the view menu. This showed two open windows, which I closed. I then started a new design, and everything went well. Peter

Feb 08, 2007 | Singer CE-200 Quantum Futura Computerized...

Not finding what you are looking for?
Singer CE-100 Futura Computerized Sewing Machine Logo

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Cindy Wells

Level 3 Expert

5099 Answers

mystery_soul

Level 1 Expert

41 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...