Question about Ridgid 26092 1224 Threading Machine

Open Question

I am looking for a wiring diagram for a ridgid 1224 pipe threader the switch has been dissassembled and I am trying to get it back running. I cant seem to find which contact closures are supposed to make for forward or reverse.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jeffpetree
  • 36 Answers

SOURCE: oil pump ridgid 1224

cant remember if this is the valve and spring type or gerotor (gear) pump but before disassembly try forcing air through with a hose then priming the pump again, run it in reverse then forward again
if that doesnt do it there are kits for each

Posted on Aug 29, 2012

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you adjust a victaulic roll groover


There are several adjustments that can be made on this tool, therefore it would be best to discuss your question over the phone with one of Victaulic's Tool Specialists. They are always happy to answer your questions! They can be reached directly at 610-559-3444.

Jan 23, 2013 | Ridgid 300 Pipe Threader & Victaulic Ve272...

1 Answer

Ridgid 700 trips gfci


you have a wire that touch to the housing of the tool
or
the windings of the motor, a brush holder have a default isolation
this type of circuit breaker is disconnected when it detects a curent flowing through the ground

Nov 17, 2012 | Ridgid 41935 700 Power Drive 115v Threader

1 Answer

Oil pump ridgid 1224


cant remember if this is the valve and spring type or gerotor (gear) pump but before disassembly try forcing air through with a hose then priming the pump again, run it in reverse then forward again
if that doesnt do it there are kits for each

Jul 05, 2012 | Ridgid 26092 1224 Threading Machine

1 Answer

Machine stopped a coulpe of times while threading and then stopped completly.. is it the foot switch or is there a reset somplace on the unit


there is no reset- possible overload fried your motorcheck voltage to the switch first though
the foot switch is just an interrupter and i doubt thats the problem

Jul 30, 2011 | Ridgid 26092 1224 Threading Machine

1 Answer

Manual


got it, go to Rigigparts.com and type in your model number and you can download a users manual for the tool along with the wiring schematic on about page 24. If I have helped you with your request would you please rate this response accordingly and thank you.

Aug 24, 2009 | Ridgid 26092 1224 Threading Machine

1 Answer

Threads are all chewed up and broken in places


First look carefully at your die, is one of the cutters out of place? I hope you have been using plenty of cutting oil, not lube oil. Lube oil will ruin cutters. If your cutters have chips out of the cutting edge, they won't work. Don't try to thread stainless steel. Only use a die that has a guide section on it to keep the die true to the pipe.

May 06, 2009 | Ridgid 15682 300 Complete Threader

Not finding what you are looking for?
Ridgid 26092 1224 Threading Machine Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ridgid Tools & Hardware - Others Experts

rickb63

Level 2 Expert

170 Answers

Will Hags
Will Hags

Level 1 Expert

13 Answers

Are you a Ridgid Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...