Question about Audio Players & Recorders

1 Answer

HI, I need the schematic, I'll find the problem myself. Thanks cloumax2011

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,140 Answers

Hello clomax2011,

Please can you specify the brand and full model number of the device or appliance you need a schematic for. Unfortunately, asking a question from a page containing information about your product does not mean details of your product are automatically included when you submit the question.

Please reply with these details by clicking on "Add a Comment" below your question. You should note that not all schematics are freely available and I may need to pass your enquiry to someone else to answer.

Thanks,
BElectric

Posted on Apr 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hey Dave, Good Evening...First off, Great


Hi again,
Actually, with all of the information that you are requiring, it would probably be easier for you if you were to subscribe to the information service at alldatadiy.com. There you can get all of the factory information that I use to perform my job. The last I checked, I think it was about $27 (US) to subscribe to all of the repair information for a single vehicle for an entire year. You can add a second vehicle for (I think) about $20/Yr.

Anyway, Here is a direct link, check it out:

AllData DIY

I appreciate your business,

Dave (dttech)

Feb 08, 2012 | Cars & Trucks

1 Answer

Show me schematics for 2005 Chevy Colorado


Hi,

You'll need to be specific...as there could be up to 50 schematics.

Which schematic do you specifically require?

Please re-post your question for the Experts.

Nov 01, 2011 | 2005 Chevrolet Colorado

1 Answer

Got a new headlight assembly and need picture on hook up


Most of your wiring connections are inside the headlight housing and the plugs are too large to go through the holes in the headlight housing. To get them out, you must "unpin" the plugs. You need two special tools to do this with. They cost about twenty dollars each. If you'll contact me directly, I'll send you a schematic for your bike. Please remind me of what you need. wd4ity@bellsouth.net This forum will not allow a file size of over 150Kb. I'll send the schematic as either a .JPG or a .GIF picture file.

Good Luck
Steve

Jun 25, 2011 | 1993 Harley Davidson XLH Sportster 883

1 Answer

Nails were loaded backwards in my Hitachi nail gun. I can't unload them


Hi,

Sorry to hear, but it happens.....

You'll have to take the magazine apart and disassemble at least as far as the nail got. I'm giving you the webpage from toolpartsdirect.com for the schematic diagram and parts list to help you take everything apart, and of course, put back together again. http://d3cmirsdb60x3h.cloudfront.net/schematics/hitachi/nv83a2.big.pdf

Be sure to check all parts for damage, such as scarring on metal parts that might cause nails to stick later.

This site is a good place to get parts. Very fast delivery!

Hope this helps. If it does, I'd appreciate a 4 thumbs up. Thanks,

Handie Andie

Apr 24, 2011 | Nailers Hitachi Nv83a2 3 14" Coil Framing...

1 Answer

Planer not working checked fuse this was ok no power to motor.


Hi Ronald,

The switch probably needs repairing or replacing. If you can get to the switch, check to see if the wires are still connected. Do you have a multimeter? You could check the voltage to see if any juice is getting through to the motor. If not, then the switch is probably bad.
If you find the switch is bad, reply back here and I'll see where I can find you one. You'll have to supply your make and model to me. If you want a schematic, I'll try to find that for you too.

Hope this helps. If it does, I'd appreciate a 4 thumbs up. Thanks,

Handie Andie

Apr 21, 2011 | Tools & Hardware - Others

2 Answers

I've owned a Roland AC-90 acoustic guitar amp for 8 months and am having problems with the XLR mic preamp. There is some very low-level output with the volume fully advanced, and with an external...


I don't have the exact schematic... however sometimes they have RF bypass capacitors to ground on the balanced input lines and one side gets shorted. The schematic I do have is for an AC100. It shows a rather unconventional input circuit. You can download it here and it MIGHT be close to your unit:

http://elektrotanya.com/roland_ac-100ut.pdf/download.html

I note that this unit does NOT have Phantom power so you CANNOT use a condenser type mic with it unless you use a preamp with Phantom power... Maybe that is the problem?

Feb 16, 2011 | Roland Ac-90 Acoustic Chorus Guitar Amp...

2 Answers

I'm becoming fan of certain pages I didn't click to become a fan of? How do I Un fan myself?


Hi,
To be removed from a page, visit the page you want and on the bottom left there is link saying "Remove me from fans". Click that and you will be removed.

Jan 31, 2010 | Facebook Social Network

1 Answer

HI, I HAD TO UNCLOG MY PUMP ON A MAYTAG NEPTURE TOP LAOD WASHER TODAY, EVERYTHING WENT OK UNTILL I WENT TO FINISH AND I SAW THERE WAS A GREEN WIRE THAT WAS NOT HOOK TO THE PRESSURE SWITCH I DONT KNOW IF IT...


Hi SandI,

Your machine is a FAV6800A correct?

If so looks to be Cabinet Ground connection to unused connection on the pressure switch as the schematic shows. See attached schematic Pic. If you open up the rear console three # 15 Torx screws on the rear condole the schematic should be inside for your machine console.

I’ll try to take a pic of the connection I see on the pressure switch. From what I see no big deal to let it hang if this is the green wire in question. Do you see two green wires on the connector that is hanging?

Excellent DIY job on Drain Pump clog a tight work area for sure. I have a Sump Cap DIY Filter I made if you are interested I will post a pic. Stops coins and other items from working there way down to the pump impeller.

Here is a screen snap of the schematic showing the connection point on the Pressure Switch……Rich



9991b37.jpg

Jan 18, 2010 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

I need the Bose SoundDock schematics


No, but I have repaired many without a schematic. Aside from damage, there are abiot four basic failure modes. Tony

Aug 24, 2009 | Bose SoundDock digital music system...

1 Answer

Schematics Required


hay guy,
i also need the diagrams.i tryed many way to find it.but it dosent work.
anyway im repairing efka & quick rotan by myself without any diagrams.
if you like i can share my knowledge with you.
email me .
first sms me .00940772532280

nuwan

Aug 12, 2008 | PfaFF Creative 7570

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5126 Answers

The Knight
The Knight

Level 3 Expert

74245 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...