Question about Acer Computers & Internet

1 Answer

I am unable to boot my computer and use any application

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,632 Answers

Hi,

Welcome to Fixya. If your computer won't boot you can try to boot the system using Safe Mode and try to see it it will be able to boot so that you will be able to backup your file. In addition to that you disable other programs that might be causing the system not to boot up. Go to Safe Mode and If you're able to access safe mode follow these instructions:

1. Go to Start then click on RUN.
2. Type MSCONFIG.
3. Go to Services Tab, click Hide Microsoft Services then click Disable All.
4. Reboot the computer and see if it will go to normal mode. It you will be able to boot to normal mode it only means that one of the installed software is preventing windows to load.
5. If still can't boot you need to reformat the system or do a Hard Drive Recovery or Acer eRecovery

How to use Acer eRecovery

If you have questions please let me know. Thanks for using Fixya.

Posted on Apr 01, 2011

  • Rofel Lantican
    Rofel Lantican Apr 01, 2011

    And if there's a reason that you can't use the Acer eRecovery then most likely you need the Recovery Disk of your computer or a Windows Operating System. Thanks

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CPU: intel core i3 550, MB: Inel DH55TC, Ram: Transcend: 2GB 1333Mhz, SMPS: 550 Watt. After first installation, this system ran for 3 months without any problems, suddenly, it became dead and assuming it...


How many years do you own that desktop computer? You have a problem with your Ram: Transcend: 2GB 1333 Mhz

Ram is always responsible to boot and run all system required by your computer
A defect ram cannot boot or not properly run application e.g.
Power-On-Self-Test (start up of your computer)
Booting your Operating System
Running your Application like Microsoft office , Photoshop and so on

Replace your Ram

Jul 25, 2011 | Intel DH55TC Motherboard

1 Answer

My printer wont retrieve the application list and therefore I am unable to scan.


hi michael_argu

remove your old printer software in your computer then restart computer, after your computer boot again reinstall your printer software again.

thanks and regards

Dec 08, 2010 | Lexmark X4530 InkJet Printer

1 Answer

Doesn't boot. IR remote working. No boot lights. Remove memory stick, tries to boot. If program on memory stick, can a new one be purchased?


Power down completely and then remove the memory stick. Wait a full 30 to 60 seconds with power off. Power up to start boot process. Pay attention to the screen while booting to note any messages during this time. If the computer fails to boot still - check the drives (floppy, CD and DVD) to be sure none have disks inside - remove any if found. Attempt a warm reboot if possible - otherwise perform a cold / hardware reboot.

If still not booting, access the computer's BIOS and make sure the information on those pages are correct. If in doubt, set any unknown values to "default" or auto detect. Be sure that the bootable hard disk appears in the boot order somewhere - if not the set as the first bootable device.

Once booting successfully into the OS, insert the memory stick and attempt to read the contents. Many applications that ship on memory cards are not bootable - but yours may. Read the info supplied wit the memory card fully to be sure.

If unable to boot the computer, provide the manufacturer's name, model and your OS. Also include the name of the application on the memory card.

Hopefully, you'll have gotten the computer started before needing to write back with more info. I hope his was helpful - and good luck!

Mar 19, 2010 | Computers & Internet

1 Answer

When starting the computer, after the Windows XP logo screen, I get a black screen that reads "Analog input cannot display this video mode." When I clear that screen, I get a blue screen with the following...


Boot your computer2_bing.gif to safe mode and change the display settings to either 800x600 then save and reboot2_bing.gif once it comes back up you can change the display setting to what you prefer.
To get into safe mode press F8 on you keyboard2_bing.gif every second while it is first booting up.

Mar 09, 2010 | Microsoft Windows XP Home Edition

1 Answer

Lsass.exe-Unable to locae component


Boot from your WinXP CD and repair your existing installation. That is the component that controls security on your computer. When done with the repair and you can boot into your operating system again, you should do a full virus scan on the computer since there are several viruses that can cause this problem.

Apr 12, 2009 | HP Compaq Presario V2000 Notebook

2 Answers

UNABLE TO BOOT htc touch pro


Yes. i solved the problem in my one
press:
vol down + restart + and the middle button = good :)

Dec 03, 2008 | HTC S710 Smartphone

1 Answer

Svchost.exe application error


start the system up in safe mode (F8) on boot up, perform a system restore and restore the machine back to a date before the problem occured



regards


Nov 21, 2008 | Acer Aspire 3000 Notebook

4 Answers

UNABLE TO BOOT htc touch pro


voldown, central key and reset botom at the same time, then text appear, choose number 1 for restore manufacturer default pressing volup or 2 for restore munufacturer default and format moviMand pressing voldown and wait a few seconds.

Oct 16, 2008 | HTC Touch Pro Smartphone

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

586 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...