Question about Tricity Bendix AW1400W Front Load Washer

1 Answer

When you set a program. The end light keeps buzzing

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,277 Answers

Hi from retired Englishman in SW France,
(try this just in case!)
I would gently suggest as a first step that you clean the drain motor lint tray/filter. So many 'faults' are caused by blocked filters and many machines will not even go to spin or release the door lock if there is any water still left inside.
Here are my complete guidance notes for checking both the drain motor filter and the drain motor ;-0)
-------------------------------------

If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!) and most are held in by a round cover/knob. Sometimes the filter will not come out with the cover and you will have to persuade it to come out to play!

REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT!
It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. If it doesn't work then the motor is malfunctioning!

Hope the filter is the problem and good luck!
John C

Posted on Apr 01, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

410e buzzer keeps buzzing after switch is off


sears kenmore dryer when dry cycle is done buzzer keeps ...

www.shopyourway.com > Manage My Life > Questions
It can be very annoying when the buzzer to your dryer will not shut off after the ... push to start switch as soon as I close door also buzzer keeps buzzing at end of ...

My dryer end-of-cycle buzzer will only stop buzzing when I ...

www.shopyourway.com > Manage My Life > Questions
I see your dryer buzzer will only go off if the door is open. ... Dryer #11079622800: End of cycle buzzer won't stop buzzing after cycle is complete. ... sears kenmore dryerwhen dry cycle is done buzzer keeps buzzing. will not turn off unless you ...

Why won't the buzzer shut off on my Kenmore 80 Series ...

www.shopyourway.com > Manage My Life > Questions
The buzzer won't stop buzzing after the load is complete. ... The buzzer won't stopbuzzing unless you open the door or turn on the timer and the dryer will start ...

Keep Your Dryer Quiet - Instructables


Dec 14, 2015 | Dryers

1 Answer

Why do my lights keep fading and buzzing on my 2003 R1?


Bad earth on circuit, probably corrosion. Check in headlight on casing.

Jul 03, 2014 | 2003 Yamaha YZF-R1

1 Answer

TV turns on then cutts off


that buzzing is the high end power trying to turn the lamp on.... the electrical current and shock is what turn your lamp on your tv which is what the buzzing is dont worry thats normal...however your solution is buy a new lamp for your tv but make sure its the right serial number for lamp u cant just buy any lamp. best place to buy one ebay.... as in the lamp still trying to light up its only because the electrical current going into the lamp and then cutting off causing the red light on your tv....so other words all it is is the lamp... CAUTION!!!! those lamps get up to 400 degrees unplug tv to ensure no electrical current.... hope i helped.... JACOB WINKLER

Jul 16, 2012 | Toshiba 46HM95 46" HDTV

1 Answer

Amana asd2624hes buzzing sounds


Sounds like the compressor trying to start and failing. Call out an engineer

May 19, 2012 | Amana Refrigerators

1 Answer

How do you set the clock and program to brew at a specific time?


To program the Auto On
1. Set the desired Brew-Start time.
a. Turn the FUNCTION KNOB to “Prog”.
b. Set the time you want coffee to begin
brewing by using the minute and hour
push-buttons. Follow the same instructions
you used to set the time of day, in
the To set the time section above.
2. Turn the FUNCTION knob to the “Auto On”
position. LCD will display the current time.
3. Lift and release the FLIP SWITCH. The
green indicator light will come on to remind
you that the programming function is in use.
At the programmed time, the red light will
come on as well, indicating that the brew
cycle is starting. Both lights will go off when
keep warm cycle ends.
NOTE: To reactivate the auto-on feature to
start brew cycle at the same time another day,
simply lift and release the FLIP SWITCH. The
green “auto-on” light will illuminate.

Aug 16, 2010 | Cuisinart DCC-1200 Coffee Maker

1 Answer

Constant Buzzing sound on recipients end


it might be due to EMI(electromagnetic interference). if other phones or internet lines r nearby, u can hear the buzzing sound.. if EMI is the cause, then its best to keep the phones isolated from the devices causing them. Good luck!!

Oct 04, 2009 | Uniden Cordless Phone

1 Answer

Need assistance on how to program the timer for my cuisanart 12 cup coffee maker


1. Set the desired Brew-Start time.
a. Turn the FUNCTION KNOB to “Prog”.
b. Set the time you want coffee to begin
brewing by using the minute and hour
push-buttons. Follow the same instructions
you used to set the time of day, in
the To set the time section above.
2. Turn the FUNCTION knob to the “Auto On”
position. LCD will display the current time.
3. Lift and release the FLIP SWITCH. The
green indicator light will come on to remind
you that the programming function is in use.
At the programmed time, the red light will
come on as well, indicating that the brew
cycle is starting. Both lights will go off when
keep warm cycle ends.
NOTE: To reactivate the auto-on feature to
start brew cycle at the same time another day,
simply lift and release the FLIP SWITCH. The
green “auto-on” light will illuminate.

The manual can be found here:
http://www.cuisinart.com/share/man/25_man.pdf

Mar 24, 2009 | Cuisinart Brew Central 12-cup Coffee Maker

2 Answers

TV Just Started Making a Humming/Buzzing sound


Replacing a flyback is not something I would suggest for anyone with no electronics experience. Second, lets see where the noise is coming from first. Take off the back and listen to the noise. The flyback will be at one end of the large red wires that go to the tubes. Sometimes the connection at the tube is not 100% and the noise comes from there. BE CAREFUL - there are high voltages going through this red wire that can be dangerous even with the set UNPLUGGED!! IF the noise is coming from the connection at the tube, with the set unplugged, carefully turn the rubber cap back and forth touching only the rubber part with one hand. Put the other hand in you pocket while doing this.

If the noise comes from the flyback side, if you can solder, again with the set unplugged, try resoldering the pins on the transformers. That may resolve the problem.

Keep me posted.
Dan

Feb 13, 2009 | Samsung HCL5515W 55" Rear Projection...

1 Answer

Machine will not operate


If you are getting a flashing "0" and a buzzing sound it means you needed to hit the Skip/Reset button at the end of the last program. Shut everything off, then hit the Skip/Reset button a few times and then put in a new program and see if it works.

Mar 06, 2008 | Zanussi ZWF1440 Front Load Washer

1 Answer

Sony KF50WE610 720p scale is wrong


(1) what is your source? cable box? satellite? Your source could be your problem. Your TV just pick up what is sent to it.

(2) Light blinks and buzzing is a symptom of a lamp going bad. Just change your lamp. lamp part number XL-2100
2c46da9.jpg

Sep 18, 2007 | Sony Grand WEGA KF50WE610 50" Rear...

Not finding what you are looking for?
Tricity Bendix AW1400W Front Load Washer Logo

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tricity Bendix Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Paul Bade

Level 3 Expert

1516 Answers

Are you a Tricity Bendix Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...