Question about Motorola Mobility H700 Wireless Headset

1 Answer

My bluetooth isnt synced to my phone and it isnt. how do i restart the process so that it syncs to my phone??

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 17,970 Answers

I have the H715 but my iPhone only showed the H721 instead of the H715. I selected the H721, entered the passcode and connected. Called my home phone with the earpiece in and it works.

From user guide and other user comments...
Make sure the H7xx is fully charged up (not necessary but you'll probably begin to immediately use it and it would be bad to have it discon because the battery is dead). Turn off the H7xx (the ring around the talk button should not be flashing blue every few seconds), push the talk button, thats the oval button on the face of the headset, for about five seconds, until the ring around it displays a purple color. Immediately let go of the button and flip open the tiny microphone extension. Now it's in pairing mode and you can leave it while you fiddle with the iPhone.

From the iPhone main menu, select the "Settings" button, then in the Settings menu, select the "General" option.

Touch the "Bluetooth" menu item on the General menu. when the next screen appears, if your Bluetooth is already turned on it will start looking for (discovering) your H7xx. If Bluetooth is not turned on, slide the gray button so it displays "on" instead of "off". Your iPhone should now start discovering your H7xx. It should automatically find your H7xx, then display another screen that prompts you for a code. According to the manufacturer's guidelines, the H7xx requires you put in "0000" that is 4 (four) Zeros as the code.

If everything went well, the "Bluetooth" screen should be displayed again and the Motorola H7xx should show up under the word "Devices" showing that it is Paired.

Your H7xx should now also blink Blue around the talk button.

If things didn't go well. I suggest navigating back to the bluetooth menu. Turning bluetooth off on the iPhone. Flipping closed the microphone boom on the H7xx and starting over again. I had to do it twice because I fumble fingered the 4 zeros.

NOTE: it is not necessary to have the H7xx right on top of the iPhone, but I'd have it within an arms reach, just to be sure you get a good signal and you actually pair to your Bluetooth headset.

Once the iPhone has discovered the H7xx if it continues to state "Not Paired" simply tap the Motorola H7xx box and it will take you to the next screen. Enter "0000" as the security code. The iPhone should now successfully pair with the H7xx.

Posted on Apr 05, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to sync car to I phone


Tand. I have not had to do it. You can try the attached links they tell how to link I Phone to auto.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://owner.ford.com/how-tos/sync-technology/myford-touch/phone/how-to-pair-your-phone-with-sync-with-myford-touch.html

How to Sync iPhone to Car Bluetooth

Syncing Your Bluetooth Device to Your Car

iPhone 5 Bluetooth Pairing to Your Car

Apr 20, 2016 | Cell Phones

2 Answers

How do I connect to Ford Sync?


To use any of the phone features for SYNC such as making a call, receiving a text message, or using SYNC Services, you must first connect, or "pair" your Bluetooth-enabled phone. Pairing is what allows Bluetooth devices to communicate securely with each other.
Please note that SYNC can make and receive calls using only one paired phone at a time.

Before you start

There are a few things you should do before starting step 1:
blobserver?blobkey=id&blobwhere=1309207543643&blobcol=urldata&blobtable=mungoblobs&b=91
Turn on your

  • Mobile phone
  • Vehicle
  • Radio/SYNC

blobserver?blobkey=id&blobwhere=1309207543650&blobcol=urldata&blobtable=mungoblobs&b=91
Enable your phone's Bluetooth feature and make your phone discoverable.

Press the Phone button to access the Phone Menu. Press OK. Add a Device displays. Press OK.

SYNC prompts, "Press OK to begin pairing device." Press OK.

SYNC prompts, "Search for SYNC on your device and enter the PIN provided by SYNC." Press OK.

A six-digit number displays on the screen for three minutes, during which time SYNC actively seeks for the same number from your phone.

Type the number displayed by SYNC on your phone key pad.
Upon successful pairing, a message displays confirming the phone is connected.

Exit the phone pairing process by pressing the Arrows to select the Exit message and press OK to leave the Phone menu.

Aug 25, 2014 | Cell Phones

1 Answer

Where is sync?


Pairing a Nokia Lumia 520 to a 2013 Ford Escape
1. To Find "Bluetooth" on the Nokia Lumia 520

  • Slide your finger left on the display.
  • Press Settings.
  • Press Bluetooth.
2. Turn on Bluetooth
  • Press the indicator next to "Status" to turn on Bluetooth.
3. Pair a Bluetooth device with your phone
  • Make sure the vehicle (parked in a driveway) is turned on and engine running. Go tot he Phone Menu, System Settings, Add Bluetooth Device, Push OK, The Sync System will display a 6-digit PIN number. Use the Seek Arrows to change to Special PIN (the system will display 0000), Push OK.
  • Your phone now searches for devices and after a moment, a list of Bluetooth devices within range is displayed.
  • Press the required Bluetooth device (the tab should say Sync).
  • Follow the instructions on the display to pair the Bluetooth device with your phone. Enter the 4-digit PIN
  • The new device is displayed on the list of paired devices.
  • Press OK on the console screen to set as Primary Phone, set 911 Assist and Download Phonebook. Be sure to check your phone screen and check "Always Connect" and Yes to approve the phonebook download. Be sure to check to see is there is also a request to Always Connect for SMS (texting) alerts.
4. Return to the home screen
  • Press the Home key to return to the home screen.
Your phone should now be paired the Sync system. Use the Voice button on the steering wheel to start the process (say "Phone"). Use the Phone icon to answer (a quick push) or hang up (push and hold down for about five seconds).

For more info www.fordtechlane.com Ford Tech Lane Driving you on the fastlane of vehicle technology

Mar 05, 2014 | Nokia Lumia 520 Smartphone - Wireless LAN...

1 Answer

I have a Samsung U-485 that I can not get synced to my Ford 5-door Focus. It worked perfectly until a week ago.


When you push the Phone icon on the steering wheel (with the car running and in park) after a few seconds the center console screen will first display Phone Menu and the Phone Redial... Then use the seek arrows on the steering wheel to scroll through the menu... When you see Bluetooth Devices, push the OK on the steering wheel. Use the seek arrows again the find Connect BT. Push OK.you will see the name of your phone, or the model number (use the seek arrows), when you find your device, push the OK button. Scroll to Return, and Push the OK to go back on the menu. When done press and hold the Phone icon for about five seconds the end the process. Be sure your phone settings have it's Bluetooth on, check to see that your phone "sees" Sync...
Now push the Voice button (the mouth/sound icon) on the steering wheel, after the tone, say Phone and Sync should have your phone active...

Jan 23, 2014 | Samsung Cell Phones

1 Answer

Missing sync not connecting on my laptop


Wireless or USB? First thing to test is to turn off the PC firewall... you should also look in the Help section of Missing Sync on the PC, there is a 'Fix Connection' button. Go ahead and try to select that and also try to sync again as that restarts all the Missing Sync background processes. It will take a few seconds to restart things and you will get a popup letting you know when its done. Then, try to sync again.

If still not syncing, I would try to start the process over, from the beginning.

1. On your device, Unpair with the desktop (in Missing Sync)...if you are paired
2. Reboot your device
3. Reboot your desktop
4. Verify both device and desktop connected to the WiFi router and you have internet access (can browse the web)On the device, also check this: Settings>Wifi>Wireless Controls> Wifi.
5. Run the Setup Assistant, in Missing Sync on the desktop and it will generate a PassKey
6. Launch Missing Sync on the phone and enter this passkey, and hit the 'Pair' button
7. Now try to sync... Contacts and Calendar syncing are initiated on the phone and synced wirelessly (WiFi or Bluetooth) and not over USB .. Media syncs using the USB cable and its initiated on the desktop.

Jun 22, 2011 | Acer Computers & Internet

1 Answer

I have a mac computer and I am trying to transfer my pic from my phone to the computer.


Hi there!
The HTC Touch Pro does not easily natively sync with a Mac computer. There are a couple of pieces of software you could try to get pictures from your phone to your computer.
One is the Missing Sync for HTC Touch from Mark/Space - http://www.markspace.com/products/htctouch/htc-touch-sync-mac.html This program has been well tested. I've used a different version (for a palm phone) and it works well. It costs $40.
Another program that I do not have experience with is SyncMate for Mac from Eltima Software - http://www.sync-mac.com/ Unfortunately, only the $40 version syncs photos.
If you have a microSD card in your phone, you can put photos on the card, then use a USB card reader to put the files on your computer.
There is also a possibility of using bluetooth or email to transfer the photos. You can email yourself the photos and pick them up on your computer, or possibly transfer the files with bluetooth. I have never used the HTC Touch Pro before, but the process to get bluetooth started should be something like this... - Make sure your smartphone is set to "Discoverable" - Go to System Preferences > Bluetooth on your computer. - Click the "+" button at the bottom of the device list. - Select your phone from the list when it shows up and complete the Bluetooth Setup Assistant. - On your phone navigate to the photo and try to find an option to send the photo via bluetooth. You will have to accept the transfer on your computer and the file will most likely go to my documents.
I hope this helps!

Apr 08, 2011 | HTC Touch Pro Smartphone

1 Answer

I have a problem with my samsung e1410 bluetooth,and display the message "initilising"


try resetting the Bluetooth headset. and restarting your phone.
after restarting your phone go to bluetooth and delete the headset off the list of Bluetooth devices. Turn on your bluetooth and sync it with your phone. should work after that

Feb 28, 2011 | Samsung Cell Phones

1 Answer

Thx for advice but i can pair my phone with the car but i cant manage to pair my contacts from phone to the car there is not bluetooth options in iphone...


I found this welcome surprise after the 3.0 iPhone software upgrade a couple months ago...

Problem: I had too many contacts on my iPhone syncing with my car making it tough to scroll to my desired contact.

SOLUTION: Setup a 'GROUP' in your iPhone's Contacts which lists only those people you want to have available while in your car; Next, goto Settings, General, Bluetooth, MB Phonesystem (or your Bluetooth name) and choose the GROUP you want synced.

The new setting will take effect the next time you sync with your car (you might have to restart bluetooth on your iPhone to make the selection stick).

Hope helps.

Jan 28, 2010 | Car Audio & Video

1 Answer

Wont sync to windows media player


so, im running into a terrible restarting problem after syncing, most likely because of corrupted music files from limewire or actually i was thinking it might be an excess of songs. even though windows media player 11 wont say filled (after sync) I have a feeling that the restarting issue (my phone is practically flashing on, then restaring one time after another) might be from not having space on the card for updates? haha im no phone tech, just conceptualizing. this is my problem. if it is yours too, take the music back off your card or just remove your card altogether and your phone will be just fine. if you cant take the music back off the card, just format the card. ANYWAYS
to use windows media player 11 to sync to env3
plug in usb from phone to computer, i know its a big step
either- select music from the sync menu when the phone asks you
or - go into the my music folder and press the right tab button from the inner keypad that says sync.
then after your phone hooks up to your computer and is identifiable in the My Computer menu under LG VX9200, open windows media player, it might take a while to read the phone on the media player, then drag mysic into the window on the right hand side of the windows media screen. I had trouble when i clicked the sync tab on the top of the player screen, (you know, the tabs at the top that show now playing, library rip burn and sync) so i'd suggest not clicking the tab, and when device setup pops up, click next and finish. if your wmplayer screen freezes when you click finish and your device name comes up with two squares for its name, restart the process,
Cancel sync on your phone, get back to the sync button on your phone, and do it again, this time, make sure wmplayer is closed, then open it after your computer recognizes the phone. if the computer shows the name of the device as two squares, change the name, it seemed to help me. then.... well yeah just drag music into the window, its best to make a playlist that is named sync list..........mmmm better yet, that might be why mine is restarting, because the entire library is dragged from one playlist, but it doesnt syc like that....... damn nevermind. yeah just drag songs onto your phone and click start sync when you are finished, start sync will be located under the list of songs you create in the sync list window k? that was the bvest way i figured it out, except for my restarting issue, but like i said... limewire loves me. good luck, and help me out with my problem if you have any idea whats wrong, enV3 restarts after sync with micro sd card.

Aug 08, 2009 | LG enV3 VX9200 Cell Phone

1 Answer

Cannot Sync music files


okay... :)

1. the PC needs a CD-ROM with the cell phone's drivers to help interface the sync process.

2. you could transfer the files via bluetooth if both cell phone and computer have bluetooth components built in them.

3. if the PC tells you the memory card is write protected, look for a tiny little lock/unlock switch in the edge of the card to undo the "protect".

Hope this helps...

- J.

Feb 18, 2008 | Motorola Mobility MOTOKRZR K1 Cellular...

Not finding what you are looking for?
Motorola Mobility H700 Wireless Headset Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Radio Communications Experts

Coss

Level 3 Expert

1056 Answers

Brad Brown

Level 3 Expert

15644 Answers

Dennis

Level 2 Expert

220 Answers

Are you a Motorola Mobility Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...