Question about Marmot Mountain Down Jacket

4 Answers

Hello, My name is Steve and I recently snagged my down jacket and made a small tear. My wife sewed the rip but, the location of the repair is about where the Marmot patch is located on the other sleeve. Would it be possible to purchase a patch that we could sew over the repair. Many Thanks Steve

Posted by on

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Subject verb agreement. No one in our group has a jacket

Posted on Mar 04, 2015

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 159 Answers

Marmot has a great warranty policy. I recommend sending the jacket to Marmot Repair. They will typically do what your wife has already done...sew up the hole. If you write a letter explaining what happened and ask if they would put a patch over the tear https://www.amazon.com/Suriora-Charger-Samsung-Motorola-Smartphones/dp/B01IT06SSU/ref=sr_1_3?ie=UTF8&qid=1481855706&sr=8-3&keywords=SURIORA

Posted on Dec 16, 2016

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 519 Answers
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 190 Answers

Marmot has a great warranty policy. I recommend sending the jacket to Marmot Repair. They will typically do what your wife has already done...sew up the hole. If you write a letter explaining what happened and ask if they would put a patch over the tear. I constantly surprised what great service i get from these outdoor equipment companies.

Hope this helps.

Posted on Apr 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1 year glittertind jacket has a smal tear (1 cm). I go into the mountains in two days. How can I fix that?


oh gee wizz what to do ay?? this is a repair help website not your personal sewing contact

Dec 29, 2017 | Cars & Trucks

1 Answer

Top thread intermittently goes through middle of bobbin thread


If it does ok for around twenty stitches and then pulls the bottom stitch to the top there is this problem:
1. Top thread has tension added all at one time. This means the thread is getting a snag somewhere.
2. When you thread the top do it with the foot up. As you are threading make constant small tugs to see if there are any snags.
3. When a snag is found it will have to be smoothed for the thread to move smoothly.
4. Check the thread while it is flowing through the needle. If it is getting a puff ball you will need to replace the thread with a quality embroidery thread.

Apr 08, 2015 | Sewing Machines

1 Answer

I have 1998 bmw 323 the rag top has a few small snags in it. No tears just small snags that I dont wanrt getting worse.


If you don't want to hand sew the top then cloth adhesive will work to keep loose end from unravaling further. depending on the fabric and color I like a very small amount of either goop, contact cement, or a very small amount of superglue. for best results make a small repair in a not to noticable place and let it completely dry. then see what it looks like. if you don't like it don't do that again. Sometimes with contact cement you can hand mold the loose pieces after the glue starts to dry. goop dries a little quicker so you need to work pretty quick. superglue is the hardest to work with but done carefully it will give you the longest lasting and least showing result. be extra carefull not to get the glue on anything and make very small repairs one at a time.

Apr 23, 2011 | Car Audio & Video

1 Answer

How to do darning with allure usha sewing Machine


I do not know what machine make and model this is.

But I darn the following way.

Iron onto the back of the hole/rip a piece of iron on mender in a similar colour and weight to your garment, allow just a centimetre extra around the rip. Try to bring the edges as close together and neatly as possible before ironing to attach the patch behind.

Now set the machine to a three step zig zag stitch, stitch width to the maximum and turn stitch length down to about .8 or so. Now sew over the rip/tear area fillling in the damaged area reversing back and forwards to cover the damage and a good margin around it. I use a colour matched thread if I can to make the stitching less obvious.

Done!

Mar 05, 2011 | Sewing Machines

1 Answer

Some sort of felt type insulation has come off the inside back of the dryer. I have had the dryer not quite 3 years. Is there some sort of warranty or solution to this. It is tearing clothes.


You need to check your owners manual about the warranty, most likely it just carried 1 year warranty. The felt is what the drum glides on, and if it ripped, the tub will have a gap for cloths to get snagged and rip. The felt glide will need replaced, but, you need to check the edges of the tub for sharp or metal burrs, or it will just rip the new felt. good luck, Shane

Oct 03, 2009 | Maytag MDE308DAYW Electric Dryer

1 Answer

Broken zipper pull on snowboarding jacket


Put the zipper back on its tracks....use some staples (appr.3) and push them into where the old stopper was making as many tight circles as you can .use small needle-nose pliers. after this simply sew over top of the staples with strong thread or fishing line. It's a bit red necked ...but it works.

Aug 29, 2009 | Winter Sports

1 Answer

Tears in a trampoline net


You can use a patch, but most trampolines fabric is made to stretch, and a patch interferes with that often transferring the stress to another location causing additional wear on the fabric. Best thing to do is to simply replace the entire mat. The weather is pretty ******* them.

Nov 26, 2017 | Trampolines BQC1620

2 Answers

My Whirlpool Duet front loader is ripping my clothing. It looks like it is being pulled, the area they are ripped looks like they are being pulled! I checked inside the machine to see if there was anything...


My washer ruined 2 king sheets 3 shirts and brand new jogging suit, so I know what you mean! The rubber gasket ...it had 2 metal bands..one on the inside which is a wide one and a small thin one on the outside of the gasket. You really can't see the wide one unless it has started to slipped off or break. or by taking the ting one off,..my wide band came loose which caused the screw to be exposed just enough for something to catch on it, tearing the material, it kept wrapping around and around untili eventually the band came completely off. I hope this helps.

Linda

May 07, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Repair or replace?


If the rip or split extends from the voice coil out to the edge, the speaker may be too far gone to replace. I have repaired expensive speaker cones with epoxy cement, provided the tear is fairly small or narrow. No noticeable degradation of performance either.

Dec 20, 2008 | Infinity SM 255 Speaker

1 Answer

I need to replace the crusie control buttons


disconnect batt.wait 5 minutes,push brake several times,locate airbag fuse and remove.this is improtant as you will have to remove drivers airbag.there are 2 round plastic caps covering the 2 airbag bolts located at back of steering wheel by the cruise switches.remove caps remove the 2 8mm bolts.remove airbag,set airbag away from you with plastic cover of airbag up.replace switches.reinstall airbag,reinstall fuse.reconnect batt.

Oct 06, 2008 | 2006 Ford Escape

Not finding what you are looking for?
Marmot Mountain Down Jacket Logo

Related Topics:

990 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marmot Clothing Experts

ray gallant

Level 3 Expert

51535 Answers

Da Doc

Level 3 Expert

992 Answers

Bill Boyd

Level 3 Expert

50572 Answers

Are you a Marmot Clothing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...