Question about Sony FD Trinitron WEGA KV-32FS120 32" TV

4 Answers

Stand by timer

This will blink and the tv will not turn on

Posted by on

  • 4 more comments 
  • Anonymous Aug 05, 2008

    stand by/timer and it doesnt turn on


  • paddonrj Sep 02, 2008

    I also have a sony 32" where the standby sleep red led constantly flashes. When I press the power button on the TV it stops, pressing again and it restarts. It does not sound like the tube is powering up at all. Is this repairable, is there an internal fuse that could be causing this problem?

  • btcraddock Sep 02, 2008

    plugged in all tried rebooting

  • tjohns65 Sep 04, 2008

    I have a problem my T.V won't turn on and notice that the stand by/timer is blinking red. Is there a solution to fixing the problem so I can turn T.V. on

  • Anonymous Dec 06, 2008

    stand by timer - flashing red light
    TV will not turn on. No picture and no sound

  • Anonymous Dec 29, 2008

    i76i76

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Stand by timer is blinking green tv will not come on

Posted on Dec 29, 2008

Turn on no working

Posted on Sep 01, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Stand by blinking and doesnt turn on

Posted on Aug 05, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 83 Answers

Make sure all the cords are plugged into the wall, and if you're using a remote control try changing the batteries

Posted on Aug 05, 2008

4 Suggested Answers

techman
  • 3130 Answers

SOURCE: Sony Trinitron KV-27S46

There is a problem in the sweep section of the set. The Horizontal sweep power supply most likly. there is nothing a layman can do as it will involve troubleshooting the solid state circuit. please find a trainded tech to assist you in this repair.

Posted on Sep 22, 2006

rulds2008
  • 3866 Answers

SOURCE: tv turns on then off, stand by timer light blinks 4 times

You need to replace the power supply unit on this as it has malfuctioned there about $90 bucks plus labor on that.

Posted on May 25, 2009

  • 231 Answers

SOURCE: my tv shut itself off and now the 'stand by/timer' light is on

how old is your lamp, sounds bad. please give me high rating

Posted on Apr 16, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv cuts on but flashes red light 5 times and shuts off


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 10, 2017 | Televison & Video

1 Answer

I have a 60 inch sony tv that have a red flashing on the lower left side,no picture when I turn it on and there is ringing sound.


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Jan 09, 2017 | Sony Televison & Video

1 Answer

Insignia NS-51P680A12 TV won't turn on. I have a blinking light that I am sure is a trouble code, but I can't find the codes anywhere online.


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 09, 2017 | Insignia Televison & Video

1 Answer

Why won't my LC-32CHF5111K tv turn on I have a steady glowing red stand by light


It could be the power supply board on the TV. It could also be a blown capacitor on one of the circuit boards.

Jan 08, 2017 | Televison & Video

1 Answer

I have a lg tv 60 inch tv ln5600 when powering on red stand by light blinks 3 time then no light pic or sound not backlight and no image when using flashlight treid replacing power board does same


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Jan 08, 2017 | LG Televison & Video

1 Answer

My sony wega kf-50E200A tv keeps turning off. during each cycle the green light blinks 42 times and the tv comes on again for about 3 minutes and it happens all over again


More than likely the power supply is defective, but without testing and the repair manual that is just a guess, you make the decision to replace or repair the TV.

Jan 07, 2017 | Sony KF-50E200A TV Lamp with Housing

1 Answer

How to reset lamp timer on panasonic pt-50dl54j


If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Jan 07, 2017 | Panasonic Televison & Video

1 Answer

No Video Or Sound - Stand By Light Flashes 5 Times


If the tv was made before December 2008, there is a capacitor settlement from a class action lawsuit by Samsung. Supposedly (at no charge) they will send a repairman to replace the capacitors.

Nov 27, 2013 | Televison & Video

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-32FS120 32" TV Logo

Related Topics:

458 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

98914 Answers

The Knight
The Knight

Level 3 Expert

69938 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...