Question about Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Instructions on how to install the printers ink

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Canon Master
  • 670 Answers

Solution: Replace ink cartridge(s) MP210

Replacing An Ink Cartridge Use the following procedure to replace empty ink cartridges or when an ink cartridge error appears.

  1. After confirming that the printer is powered on, open the scanning unit (printer cover). The ink cartridge holder moves to the replacement position.

    Note: After confirming that the scanning unit support is fixed into position, release your hands.


    instructions on how to install the printers ink - lidopened.jpg
    *MP470 shown

  2. Press down on the semi-circular tab (circled area in , above) to release the cartridge and then remove it.


    Note: Handle the ink cartridges carefully to avoid staining clothes and surrounding work area.


    05sj00081_06_en.gif

    *Optional cartridges PG-40 and CL-41 shown in examples

  3. Remove and replace each cartridge individually. Or, remove the second cartridge after the first has been removed.

  4. Take out a new cartridge from its casing and gently remove the orange protective tape in the diinstructions on how to install the printers ink - 05sj00081_02.jpgrrow.

    05sj00081_02.jpg


    Note: - Do not attempt to reattach the protective tape once you have removed it.
    - Do not touch the gold electricalinstructions on how to install the printers ink - 05sj00081_03.jpg print head nozzles after removing the protective tape.

    05sj00081_03.jpg

  5. Insert the ink cartridge into the ink cartridge holder.- Black: the left slot- Color: the right slot*

    *One black cartridge and one color cartridge must be installed in the machine in order for the printer to operate. It does not matter if the capacities (Standard or High) do not match.

  6. Push up on the front of the cartridinstructions on how to install the printers ink - 05sj00081_04_en.gifnto place. (A click sound will be heard when the cartridge is locked in place.)

    05sj00081_04_en.gif

  7. Confirm that the ink cartridges are installed properly.



    05sj00081_04.jpg
    The ink cartridge is not installed properly.

    The ink cartridge is installed properly.

  8. Fold the scanning unit support and close the scanning unit (printer cover).

  9. Wait until the preparatory operation is complete; it takes about one to two minutes.

Posted on Mar 31, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Advent resetting ink levels


Hi There
Your all-in-one printer is designed to stop printing before quality is compromised. Make sure you always use KODAK Ink Cartridges. Kodak is not responsible for the compatibility or performance of non-Kodak brand ink cartridges or refilled ink cartridges. To purchase KODAK Ink Cartridges, go to the KODAK Store.
To resolve the error, replace the black ink cartridge with a new cartridge:
  1. Turn on your printer.
  2. Open the access door. For printers with LCDs, follow the instructions on the LCD screen.

    NOTE: For ESP 3250 and ESP 5250 all-in-one printers, if the ink cartridges don't move to the center when you follow the instructions on the LCD screen, see Printhead and ink cartridges do not move to center with access door open.
  3. When the printhead stops moving, pinch the latch on the black ink cartridge and lift it out of the printhead.
  4. Remove the new black ink cartridge from its bag.
  5. Remove the protective cap from the black ink cartridge.

    CAUTION: Insert the ink cartridge immediately to prevent the printhead from drying out.
  6. Insert the black ink cartridge into the printhead.
  7. Press down on the tab until you hear a click.
  8. Close the access door. For printers with LCDs, follow the instructions on the LCD screen.

    NOTE: For more information on installing ink cartridges, see the Extended User Guide for your printer. Review Maintaining Your Printer - Replacing ink cartridges.
If the error continues, upgrade the firmware for your printer:
  1. Press the Cancel button on your printer to clear the error message. (If the error does not clear, contact us.)
  2. Upgrade the firmware for your printer:
    1. Locate and select the firmware download for your printer.
    2. Follow the instructions to install the firmware.
  3. If the error continues, contact us.

Support Link :

Mar 29, 2012 | Office Equipment & Supplies

1 Answer

Colour ink cartridge not reconise. replace colour ink cartridge.cod 3603


To resolve the issue:
  1. Make sure you install the correct type of KODAK Ink Cartridge for your printer. Currently we offer two types of ink cartridges (10 Series and 30 Series). Installing the wrong type of ink cartridge may result in this error. You will need to install a new, correct type of KODAK Ink Cartridge.
    NOTE: For more information, see Which ink cartridges to buy for all-in-one printer.
  2. If you are using the correct type of KODAK Ink Cartridge, reinstall the color ink cartridge.
    1. Open the printer access door.
      NOTE: If the ink cartridges don't move to the center, see Printhead and ink cartridges don't move to center with access door open.
    2. Wait until the printhead is idle and silent, then pinch the latch on the color ink cartridge with your thumb and forefinger and lift it out of the printhead.
    3. Install the color ink cartridge back into the printer, making sure to press down on the thumb tab until it clicks into place.
    4. Close the printer access door. For printers with LCDs, follow the instructions on the LCD screen.
      For more information on installing ink cartridges, see the Extended User Guide for your printer. Review Maintaining Your Printer - Replacing ink cartridges.
  3. If the error continues, restart your printer:
    1. Turn off the printer by pressing the power button.
    2. Wait five seconds.
    3. Turn on the printer.
  4. If the error continues, and you have extra, new KODAK Ink Cartridges on-hand, try to install a new ink cartridge (or a set of new ink cartridges).
  5. If the error continues, contact us.
When the issue is resolved, we highly recommend that you upgrade the firmware for your printer for optimum performance:
  1. Locate and select the firmware for your printer.
  2. Follow the instructions to install the firmware.
Source: http://support.en.kodak.co.uk/app/answers/detail/a_id/39315/selected/true

Jun 07, 2011 | Office Equipment & Supplies

1 Answer

Keep getting paper jam fault 3618


Hi!
If the error comes up during the initial setup of the printer:

  • Select All-in-One Printers.
  • Double-click the Setup Guide for your printer.
  1. Open the printer access door.
  2. Remove all:
    • orange shipping tape
    • foam pieces
  3. Follow the steps in the Setup Guide to insure that you have properly installed the printhead and ink cartridges.
  4. Close the printer access door.
  5. Press OK to clear the error.
  6. Make a print.
OR

Check the printhead carriage area:

Debris and Obstructions:

  1. Remove any paper, tape or other obstructions from the printhead carriage area.
  2. Gently move the printhead carriage from side to side to see that it moves freely and there are no obstructions.

Ink Cartridges:

  1. Lift the printer access door, then remove the ink cartridges from the printhead.
    NOTE: If the printhead does not move to the center position, press Home, then Maintenance on your printer. Check if the Install Ink Cartridge option is available. If so, select Install Ink Cartridges, press OK, and follow the instructions. Otherwise do the following:
    1. If an error is displayed on your printer control panel or the status monitor on your computer, press Cancel to clear the error.
    2. Go to KODAK All-in-One Printer Downloads and Drivers, select your printer from the All-in-One Printers pull-down list, and download and install the latest firmware version for your printer. Follow the on-screen instructions.
    3. After you upgrade the firmware, press Home on the printer control panel.
    4. Select Maintenance, then press OK.
    5. Select Install Ink Cartridges, then press OK.
    6. Follow the instructions on the control panel LCD.
    7. Go to the next step.
  2. Verify that the labels on the ink cartridges are intact, and that the cartridges are not damaged.
  3. Verify that the KODAK Ink Cartridges have not been refilled.
  4. Insert the black ink cartridge into the printhead, then press down firmly until you hear it click into position.
    aio_black_ink_install.jpg
  5. Insert the color ink cartridge into the printhead, then press down firmly until you hear it click into position.
    p289_0012aa.jpg
  6. Close the printer access door.
  7. Press OK to clear the error.
  8. Make a print.
Hope this helps.

Apr 19, 2011 | Kodak ESP5250 All-In-One InkJet Printer

1 Answer

Not recognizing ink cartridge?


1.Check the ink. Printers are picky machines. They are programmed so that they would recognise a particular kind of ink. Thus, when you buy compatible ink cartridges, make sure that these ink are truly ones specifically made for your printer. Otherwise, the ink will not work with your printer.


2.Follow the instructions to the letter. Just like the manufacturers of original printer cartridges, the manufacturers of compatible ink cartridges have instructions on how you should place and install the cartridges in the printer. You should follow these instructions to the letter so you can be sure that they would work.


3.Clean the printer head. It is also possible that the reason why the printer would not recognise the compatible ink cartridges you bought is that the printer head itself is clogged. Such problems can occur, especially when you have not used the printer in a long time. You can clean the clogged printer heads with a cleaning solution made especially for printer heads.


If the cartridge itself is the one that is blocked, you can try soaking the cartridge in warm water first. Afterwards, dry it with a lint-free rag and then install it in your printer.


4.Check the circuitry in your printer. Another possible reason why the printer would not read your compatible ink cartridges is that the printer itself has a problem with the circuitry. You can try topping the cartridge with ink first before reinstalling it into the printer.


If that fails, you should bring your printer to the repair shop. Be warned though: If your printer is under warranty, the warranty will no longer be valid if it is found out that you have used compatible ink cartridges.

Feb 26, 2011 | HP PSC 1510 All-In-One InkJet Printer

1 Answer

How do I check ink levels on my HP deskjet D4160 printer?


Here is what I found on the Web. You can click on the link below, to see Full Instructions. If you find this helpful, pls rate me.

http://h10032.www1.hp.com/ctg/Manual/c00687555.pdf

View estimated ink levels
Follow these instructions to view the estimated ink levels of the print cartridges that are installed in the printer:

1. Open the printer Toolbox.
2. Click the Estimated Ink Level tab.

Note If the print cartridges were used before being installed in the printer, the
estimated ink levels will not appear on the Estimated Ink Level tab.
The Estimated Ink Level tab also contains print cartridge ordering information. To view
this information, click the Print Cartridge Information button.

Thanks and good luck.......
Pls rate me

Jan 01, 2010 | HP Deskjet D4160 InkJet Photo Printer

2 Answers

How do i install ink cartridge in lexmark 2650 printer


go to this site it takes you through the steps and shows you how to do it

http://support.lexmark.com/perl/support/support.cgi

hope it helps

technohelp

Mar 07, 2009 | Lexmark X2650 All-In-One InkJet Printer

4 Answers

Installing new ink cartridge, canon pixma 1600


Go here. Type "how to install ink" in the search box. Click "Search", then select "How do I install the ink cartridge(s)". You will get instructions with pictures on how to prepare and install the cartridges.

Apr 04, 2008 | Canon PIXMA iP1600 Printer

2 Answers

Installing new cartridge


Go here. Type "how to install ink" in the search box. Click "Search", then select "How do I install the ink cartridge(s)". You will get instructions with pictures on how to prepare and install the cartridges.

Mar 25, 2008 | Canon PIXMA MP210 Photo All-In-One Printer

Not finding what you are looking for?
Canon PIXMA MP210 Photo All-In-One Printer Logo

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1992 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...