Question about Sony BRAVIA KDL-40V2500 40 in. LCD HDTV

1 Answer

When pressing display button its showing 480l shouldent it be 1080l and how would i change it

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 159 Answers

Hi, That actually will depend on your input source. Example: if you are receiving " over the air digital transmission, indicated by a channel # followed by a dash then another #(12-1,8-2 etc..) the networks vary slightly their broadcast qualities. I have a Samsung 36 incher that when running from rooftop antenna get 720p most of the time. If you are connected to either a cable box or satellite box make sure you're connected with an HDMI cable preferably, or the cable boxes DVI-D ouput ( on some HD receivers ) IF you're not using a high definition cable/sat box you will not get 720p,1080i or 1080p to show up in your display. I hope this helps, Prodzilla

Posted on Mar 31, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Kodak M850 Easy Share hooked up to my television with an mini HDMI cable. The picture shows nicely but I don't know what camera button to use to make a slide show appear on the tv. Can you help?


Starting the slide show

  1. Press the Review button, then press the Menu button.
  2. Move autourg00422004id1197998.jpg to highlight Slide Show [img src="http://resources.kodak.com/support/jpg/en/manuals/GLB_en_urg_00422_images/autourg00422004ID1198002.jpg" alt="">, then press the OK button.
  3. Move autourg00422004id1198023.jpg to highlight your option, then press the OK button.

Mar 18, 2014 | Kodak Cameras

1 Answer

How do I set the Woods N1506 timer?


N1505 timer manual:
http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf

N1506 is heavy duty outdoor timer with display screen.
Plug timer in and display flashes C.
Set current time: press Time button once and display shows 1 am
Keep pressing time button until current time with am pm displays.
Dot in lower right corner corresponds to pm hours.

To set timer program:
Press Mode button, display flashes P
Press Time button until desired ON time displays.
Press Mode button again and display flashes E
Press Time button until desired OFF time displays
When programming is finished, press Mode button and display shows current time.

To reset timer, unplug timer for 10 seconds and re-program timer.
Timer must be reset after power outage. Display will warn by flashing C.

Plug lights into timer.
If lights have a switch, switch must be on.

For manual override, press Mode button, and display shows O and lights will be ON until next program change.
To use timer function, press Mode button until current hour displays.

Dec 01, 2010 | Woods Outdoor Lighting Timer

1 Answer

Model N1506, I need Operation instructions for this Woods Light Timer?


N1505 timer manual:
http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf

N1506 is heavy duty outdoor timer with display screen.
Plug timer in and display flashes C.
Set current time: press Time button once and display shows 1 am
Keep pressing time button until current time with am pm displays.
Dot in lower right corner corresponds to pm hours.

To set timer program:
Press Mode button, display flashes P
Press Time button until desired ON time displays.
Press Mode button again and display flashes E
Press Time button until desired OFF time displays
When programming is finished, press Mode button and display shows current time.

To reset timer, unplug timer for 10 seconds and re-program timer.
Timer must be reset after power outage. Display will warn by flashing C.

Plug lights into timer.
If lights have a switch, switch must be on.
For manual override, press Mode button, and display shows O and lights will be ON until next program change.
To use timer function, press Mode button until current hour displays.

Dec 01, 2010 | Hardware & Accessories

1 Answer

How do I set the current time on the Woods Digital Timer Model#59203?


78a8604.jpgWoods 59301
Manual for 59301
http://waterheatertimer.org/pdf/Woods-59203.pdf

Plug timer in wall for 1-2 hours so rechargeable battery charges
If display does not show after 1-2 hours, the battery is dead and timer is no good

After 1-2 hours, you can remove timer from wall to program

Press reset (R) with paper clip to clear memory

Select format: Press and hold Clock button until 12 hour or 24 hour shows on display, then release
Press hour button to change display to 12H
press Clock button and display returns to normal
AM shows in upper left corner

Set current time:
Press and HOLD clock button
While holding clock button, press hour button and minute button until display shows current time
Release clock button
Press and HOLD days button until current day shows in display
Release days button

Further instructions to set ON-OFF times are in manual (click link shown above for manual)
If you have problems, re-post additional question.

Oct 17, 2010 | Woods Indoor 24 Hour Digital Timer (59203)

1 Answer

Won't show picture with hdmi or stock a/v cables.


What ever you are doing is so fast.First of all see that the disk tray is empty,then see that the HDMI cable is correctly connected to Xbox,and for 30 seconds don't press any key on controller,set the output to 1080l.Even now it will show no picture but after a restart of your system there would be a picture.

Jun 15, 2010 | Microsoft Xbox 360 Console

1 Answer

Program a name onto a button


This is for an M7324. Place the programming overlay on the top 4 buttons of the phone. Press Feature **266344, Password: 266344 Terminals& Sets should be in the display. Looking at the overlay press Show, press Next until it shows the name or ext. that you want to change. Press the button under CHANGE in the display. Enter the new name (use the arrow over button to move to the next space). After you are done press Show and RLS. Update will appear in the display press the button to update the change.

Nov 18, 2008 | NorStar M7324 Telephone

1 Answer

How too change time


Norstar Merdian Press Feature.
Enter "**8463".
Enter the password (default is 266344). The display shows
Hour: 01
Next Change
Select CHANGE. Display shows:
Hour: __
Cancel
Enter two digits for the hour. Chose AM or PM when Prompted.
Select NEXT.
The display shows:
Minutes: 00
Next Change
Enter the minutes.
Press the RLS button to end, or press NEXT to change the date.
The diplay shows:
Year: 99
Next Change
Enter the two-digit year.
Select NEXT and repeat to change the month and day.
Press the RLS key to save the time and date and exit programming.

Top of Page

Norstar Meridian CICS Time
  • Press "FEAT".
  • Press "*".
  • Press "*".
  • Press "266344" (CONFIG) or "23646" (ADMIN).
  • Enter password "23456" (ADMIN) or "72787" (SCPLUS).
  • You will see "Terminals & Sets".
  • Press "Next" five times.
  • Press "Show"
  • When you see "Hour", press "Change" or "Next" to skip.
  • Type in the hour using military time as a 2 digit number.
  • Press "Next".
  • When you see "Minutes", press "Change" or "Next" to skip.
  • Type in the minutes using a 2 digit number.
  • Press "Next".
Date:
  • When you see "Year", press "Change" or "Next" to skip.
  • Type the year in 2-digit format.
  • Press "Next".
  • When you see "Month", press "Change" or "Next" to skip.
  • Type the month in 2-digit format.
  • Press "Next".
  • When you see "Day", press "Change" or "Next" to skip.
  • Type the day in 7-digit format.
  • Press "Next".
  • When you see "End of List", Press "Rls" to exit.
Top of Page

Nortel Norstar Telephone Systems Changing the time on a Norstar system must be done using a display phone. Using a M7310 or T7316 the right 2 buttons under the display are "NEXT" and "SHOW" respectively.
  1. To enter programming mode press "FEATURE" and "* * 2 6 6 3 4 4"
  2. Enter password (default = 266344) - display should read "Terminals & Sets"
  3. Press "NEXT" 5 times - display should read "Time and Date"
  4. Press "SHOW" - display should read "Hour:___"
  5. Press softkey "CHANGE"
  6. Enter hour - display should read "AM OK or Change"
  7. Select AM or PM
  8. Press "NEXT" - display should read "Minutes:___"
  9. Press softkey "CHANGE"
  10. Enter minutes
  11. Press "NEXT" - display should read "Year:___"
  12. Press softkey "CHANGE"
  13. Enter year
  14. Press "NEXT" - display should read "Month:___"
  15. Press softkey "CHANGE"
  16. Enter month
  17. Press "NEXT" - display should read "Day:___"
  18. Press softkey "CHANGE"
  19. Enter day
  20. Press "NEXT"

Sep 15, 2008 | NorStar T7316E Corded Phone

1 Answer

Changing the number of rings on fax.


Press the "User Tools/Counter" button at the control panel.

Under the display, press the "Right Arrow" button until the display shows "4. Fax Features" & press the "OK" button

Press the "Right Arrow" button until you display "3. Setup" & press "OK".

Press the "Right Arrow" button until you display "5. No of Rings" & press "OK"

Enter # of rings with numeric keypad & press "OK"

Display will briefly show "Programmed"

Press "User Tools/Counter" button to exit back to regular display

Jul 08, 2008 | Ricoh Aficio 1013F Copier

4 Answers

How to change the time on screen


generic for all phones... the standard way to change the time and show it on screen is simply going to the settings and look for time settings... in here, you can actually change the time, the date , and the year and you can also change the time format form 12 hour to 24 hour.

Apr 08, 2008 | Lands Phones

Not finding what you are looking for?
Sony BRAVIA KDL-40V2500 40 in. LCD HDTV Logo

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74377 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...