Question about Televison & Video

1 Answer

I am having problems with my Phillips HTS3410d home theater system, for looking around the internet I am fairly positive the problem is with an electrolytic capacitor. But all the solutions say it is an easy quick fix and that you should be able to see the bad capacitor. if you could point me in the right direction as to where to look for the bad part.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 159 Answers

Hi, the signs of a bad capacitor are usually signs of it being a bit swollen on the top end, it will be silver colored ( opposite of the two metal leads coming out) also sometimes it will have pushed a rubber seal down around the metal leads towards the circuit board. Some times there may be " brown " discoloration around ANY overheated/faulty parts on circuit board. I hope this was of some help, Prodzilla

Posted on Mar 31, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the code 4 a phillips HTS3410D dvd home


I don't think the codes are given by model number but you can access one for all's website directly and obtain the code list for your urc device, the link is: http://www.oneforall.com/support/manual , you will need the remote control model number.

Feb 19, 2010 | Televison & Video

1 Answer

I have a HTS3410D Home Theater system. I cannot


a blinking or pulsing power light usualy means a problem with the power supply. Check for burned resistors or swallen capacitors on the power board it will be the one with the one with the main power running to it.

Nov 17, 2009 | Philips HTS3410D/37 700W DVD Home Theater...

1 Answer

HTS3410D power light keeps blinking


This seems to be a common problem with this model. It seems as though there are about FIVE electrolytic capacitors in the power supply PC board that have failed or dried out.

They can be replaced by someone that has the dexterity, knowledge and tools to de-solder and re-solder PC board components. Otherwise you may seek a local electronic technician. The parts cost about $5.00. Labor may run you $30 or more.

Hope this helps. I also am looking for a remote for mine, if someone has a dead HTS-3410D.

Thanks!

Jun 30, 2009 | Philips HTS3410D/37 700W DVD Home Theater...

1 Answer

Phillips hts3410d no sound VERY dim led


Have you had any thunderstorms recently in your area? if so, this could be a pulse sent threw your system form an electrical storm. this happens often during dangerous thunderstorm activity. Also, your electrical wiring in your home can produce this as well due to a faulty circuit breaker box or lose ceiling fan hook ups. the best scenario could be a defective product. this way, you can get a full refund or a replacement set up.

Jan 28, 2009 | Philips HTS3410D/37 700W DVD Home Theater...

1 Answer

Dvd player won't stay on


your unit sir or maam, it has a deffective parts you need to replace the parts the two channel of the power output ,because this parts is shorted,you need a good technician to fix it. and buy the parts to replace it


kira_ryuk99@yahoo.com

Jan 11, 2009 | Philips HTS3410D/37 700W DVD Home Theater...

1 Answer

Philips HTS3410D home theatre system. DVD is stuck inside - won't play, won't open. any ideas?


Power off the system
Unplug the power cord
Wait 5 minutes
Plug back the power cord
Power up the system
Press the open/close button
Load a DVD and play

If the tray still will not open, the cover will have to be removed and manually operated. You may have to have a technician look at the unit.

Please rate this solution - Thanks

Dec 27, 2008 | Philips HTS3410D/37 700W DVD Home Theater...

1 Answer

STANDBY LIGHT KEEPS BLINKING


Unplug the power cord, wait for 5 minutes, plug the power cord back in and try to operate the unit.

If this does not work, you will have to get a technician to look at it for you.


Please rate this solution - THANKS

Dec 26, 2008 | Philips HTS3410D/37 700W DVD Home Theater...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...