- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
i would google the model number and/or the brand name "pro standard" and see what comes up, find out who the manufacture is and then contact them, just replacing the blade with another that might fit can lead to death of the motor, the pitch of the blade is the critical factor too much and you will overload the motor, causing it to go out on overload or just burn it out. not enough pitch it will work but will be less efficient ie... not move as much air as the original
Do you know where I can get a replacement knob that goes on the back for low, medium and high setting? It came off when I was moving and is difficult to turn without it (i use a screwdriver at the moment).
There is a black and a white wire that runs up through the middle of that mess you are looking at. They run down through the center and to the light. First get a can of spray silicone
I use a brand from Gunk.Put the spray nozzle in the pull chain switch and give it a little spray. try the pull switch and see if that works before any thing else. You will not get zapted.
go to ur nearest electrical shop and tell them the model and the brand name buy that and fix it but you wont be getting a sigle blade you ll get the blades in a set not as single you need to remove all other blades and fix the new blades