Question about kawasaki 19.2V 4 Piece Cordless Tool Kit

2 Answers

The drill "runs" without any

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

If you open it up you will see the trigger will have a burn though call th i 800 number they will give you a new one ,i got two new ones at a thrift store one with charger the other did as yours so i like to take things apart and the trigger had a hole burnt through it, so they are sending me a new one now my charger just quit and i only charged the two power packs, i will call them on mon for a new charger or they can be sued people have been burt with acid shad of plastic they are Chinese junk

Posted on Nov 03, 2012

  • dwalters5
    dwalters5 Nov 03, 2012

    if you open it up you will see the trigger will have a burn though call th i 800 number they will give you a new one ,i got two new ones at a thrift store one with charger the other did as yours so i like to take things apart and the trigger had a hole burnt through it, so they are sending me a new one now my charger just quit and i only charged the two power packs, i will call them on mon for a new charger or they can be sued people have been burt with acid shad of plastic they are Chinese junk

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Try tapping on the sides of the drill to see if that fixes your problem. If not then you might try to get ahold of Kawasaki and see if theres anything they can do under warranty.

Posted on Apr 06, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My DWD110 drill runs (slowly) when plugged in. The trigger is not depressed yet.


clean switch with air pressure
if it does not settle your problem you will have to change the switch

Oct 29, 2012 | Dewalt 38 Electric VSR Drills

1 Answer

Hi my 18v xrp combi drill which is about 18 months old seems to have problems with the trigger. At times the speed of drilling is very slow but can suddenly speed up without any additional pressure on the...


YES. You have dirt and grime inside.Go to a Lowes or Home depot and look in the nail gun dept. Get a can of Paslode tool cleaner.( white aerosol can with orange and black label) $8 a can. While running tour drill,(over a sink or outside) spray it all inside aroud trigger and motor,turn in all directions and watch how much gunk will wash out. You'll be suprised at what a difference this will make and it will prolong the life of your tool. Works great on all battery powered tools and air tools ! I highly recommend it, but don't buy them out of it , leave some for me. I;m allmost out of it.

May 31, 2011 | Dewalt DCD970KL XRP HeavyDuty XRP 12"...

1 Answer

How do I use a Vermont American #17192 Drill Press Stand? Anyone have an instruction sheet for this? I acquired one from a sale but am unable to figure out how to mount our drill onto it. Thanks.


I have one of these. 2c7c66c8-687d-4eff-b1b9-7685d2c6ebab.gif
Here you will see how the drill is mounted in the device. Position (b) around the handle and tighten it up untill drill seats firmly in place. Take a speed square, or normal square and eyeball or measure the drill to see if its straight. Use the alignment adjustment (A) to fine tune the drill to get the drill bit straight and square. Tighten up all the nuts holding drill in device and recheck the drill bit for straightness.. Put your work under the drill, press the trigger and lock into place to get the drill to constantly run without finger on trigger, pull down the press lever to drill your hole... Hope this helps!

Nov 02, 2010 | Drills

1 Answer

Gas engine will not start without pulling trigger on wand to relieve pressure-engine dies when letting off trigger


I am afraid that is how they work even electric ones wont start unless you squeeze the trigger ,once they are running you should be ablr to release the trigger , and then squeeze it again whilst running . if yours dies when you release the trgger while motor is running -----good chance you are working at too high pressure. but to start you have to release all the internal pressure

Aug 22, 2009 | Campbell Hausfeld 2000 Psi Gas Pressure...

1 Answer

Motor runs on


They have issues with there switches.Depending on model # check for recall. This is a safety issue.

Jul 04, 2009 | Hitachi Drills

Not finding what you are looking for?
kawasaki 19.2V 4 Piece Cordless Tool Kit Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Drills Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Jim London
Jim London

Level 2 Expert

257 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a kawasaki Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...