Question about Modems

1 Answer

Router3041 cannot browse http://192.168.1.1

I cannot browse the web if i set the TCP/IP to obtain IP address automatically or use the default IP of the router.

When i used the IP/subnet mask and the default gateway provided by my ISP and connect the ADSL modem cable to the WAN port of the router still i cannot browse the web, however if i connect the ADSL cable modem to the LAN port of the router i can browse the web...

please help.... thank you...

Posted by on

  • ronaldoestor Mar 03, 2009

    I can not browse 192.168.1.1 but have a connection to the internet

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Reset the router by master pin..reset also pc master.

Posted on Mar 03, 2009

  • ronaldoestor Mar 13, 2009

    hello my modem is have internet connection but can`t browse the routers configuration maybe the domain name problem?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My comp.says network error,thomson tg585v8,i cant access my comp.


Check your network settings
Start, control panel, networking and sharing center. Click on your connection, properties. Click on TCP/IPv4 and TCP/IPv6 and click on properties. Make sure the settings say to obtain IP address automatically and also for DNS, then reboot the modem and computer.

You did not specify if you are using a router.

Jan 29, 2013 | RCA Thomson Digital Cable Modem (DCM305R)

1 Answer

Desktop will not conntect to internet, but it says connected. My laptop works with the wireless network connection just fine, however, we cannot get the desktop to work. any suggestions? i have been on...


You didn't mention if your desktop is connected hardwired or wireless. Let's assume your desktop is connected hardwired via ethernet cable and your PC is saying that your are connected, then you need to check 2 things. First, TCP/IP settings, go to the network connections page of your PC and look for Local Area Connection. You need to right click on Local Area Connection and click on Properties. Then on the next page, look for Internet Protocol (TCP/IP) or Internet Protocol version 4 (IPv4) for Win Vista and Win 7 OS. You need to click on it to highlight it then click on Properties. On the next page, make sure that "Obtain an IP address automatically" and Obtain DNS Server address automatically" are both selected. Sorry if cannot give you a detailed walkthrough because you didn't mention the Operating System of your PC. Second, check Proxy Settings, open up Internet Explorer and click on Tools on the upper portion then click on Internet Options. On Internet Options page, click on the Connections Tab then click on the button for LAN settings. On the next page, make sure that the "Use Proxy Server for your LAN" is unchecked.

Sep 14, 2011 | Modems

2 Answers

I'm using an SB5101 and trying to use a new wireless router with this modem, but the set up is saying I have a static IP address... where can I find that on my computer whil I'm using my old router? thanks


I have one, after finding out how reliable and well-made they are. However, they can be picky during setup, especially since they have a rare 'config IP' address (the number you type into your internet browser's address bar to change the modem's settings). Click here >> 192.168.100.1
See this link for more info.

Mar 21, 2011 | Arris SURFboard SB5101 Cable Modem

1 Answer

How to turn on a dhcp on a rca model dcm425 cable modem?


Hi there,
Enabling DHCP at the Client To enable the Windows NT DHCP client, you must log on as administrator at the Windows NT client.

Normally, you enable DHCP as part of the installation procedure for Microsoft TCP/IP, however, you can use this procedure if you have manually configured TCP/IP:
  1. Run Control Panel and choose Network.

    The Network Settings dialog box appears.
  2. Under Installed Network Software, select TCP/IP Protocol and then choose configure.

    The TCP/IP configuration dialog box appears.
  3. Select Enable Automatic DHCP Configuration.

    A Microsoft (MS) TCP/IP message appears, indicating that the DHCP Protocol attempts to configure the server automatically during system initialization.
  4. Choose Yes.

    A MS TCP/IP Configuration dialog box appears, displaying current TCP/IP configuration parameters. The IP Address and Subnet Mask boxes are not available (grayed out) and the manually configured values are no longer displayed.
  5. Choose OK to return to the Network Settings dialog box.
  6. Choose OK again.
  7. Shut down and restart the computer.
To enable DHCP on a Windows for Workgroups client if TCP/IP is not installed yet:
  1. Use Network Setup to install the MS TCP/IP-32 3.11 protocol.
  2. In the MS TCP/IP Configuration dialog box, select the Enable Automatic DHCP Configuration check box, and choose Continue.
  3. Restart the computer to initialize TCP/IP using DHCP.
To enable DHCP on a Windows for Workgroups client if TCP/IP is installed:
  1. To access the Network Drivers dialog box, run Network Setup.
  2. Select Microsoft TCP/IP-32 3.11, and then choose Setup.
  3. In the MS TCP/IP Configuration dialog box, select the Enable Automatic DHCP Configuration check box, and choose continue.

    A message box appears indicating that the configuration of DHCP overrides any values established locally.
  4. Choose Yes.
  5. To initialize TCP/IP using DHCP information, restart the computer.

Dec 19, 2010 | RCA Modems

1 Answer

Network key for ot 800


How do I configure my NIC with a static IP for use with a SpeedTouch Home?If you are using an Alcatel SpeedTouch Home (without a router), a PPPoE client such as NTS, WinPoet, or RASPPPoE, and are experiencing stalls and freezes while surfing or connected, it may be that your NIC is not configured correctly. You must set a Static IP on your NIC. If you have it incorrectly set for "Obtain IP automatically" it will be looking for a DHCP server that does not exist. During the time the NIC is searching for the DHCP server you will experience stalls and freezes. An incorrect NIC settings will also cause the PC to take a longer time to boot up.

This FAQ has two sections:
Section 1 - NIC Properties for Windows95/98/ME
Section 2 - NIC Properties for Windows2000/XP

Section 1 - NIC Properties for Windows95/98/ME
bred.gifStep 1
Click on Start ->Settings ->Control Panel ->Network

bred.gifStep 2
Once at the Network Window scroll down and look for the first entry in the box marked Internet Protocol (TCP/IP) that is associated with your hardware ethernet card (ignore dialup, AOL, and VPN type bindings). Select the correct Internet Protocol (TCP/IP) entry and click PROPERTIES.

image3679.gif
Actual screen shots may vary

bred.gifStep 3
Select the IP ADDRESS tab. Select Use the following IP address and enter 10.0.0.1 and 255.255.255.0 into IP address and subnet mask fields respectively. Do not click on OK yet.

image3693.gif
Actual screen shots may vary

bred.gifStep 4
Select the GATEWAY tab. Enter 10.0.0.138 into New Gateway field and click on Add. Click OK.

image3695.gif

bred.gifStep 5
Close all windows and restart the PC.

Section 2 - NIC Properties for Winows2000/XP
bred.gifStep 1
Click on START -> SETTINGS -> CONTROL PANEL -> NETWORK CONNECTIONS. Right click on Local Area Connection and select Properties

bred.gifStep 2
On the General tab highlight Internet Protocol (TCP/IP) and click PROPERTIES.

image8060.gif
Actual screen shots may vary

bred.gifStep 3
Select the GENERAL tab. Select Use the following IP address and enter 10.0.0.1, 255.255.255.0, and 10.0.0.138 into IP address, Subnet mask, and Default gateway fields respectively. Click OK.

image8061.gif
Actual screen shots may vary

bred.gifStep 4
Close all windows and restart the PC.

Nov 11, 2010 | Alcatel Speed Touch Home Modem

1 Answer

I disabled DHCP(I think it was that) accidentally when I was on the configuring page of my DSL-300T. Now I can no longer access that page, it doesn't exist anymore because of that setting. How do I turn it...


In order to enable DHCP back in your computer, Please follow these steps:

Click on start than go to control panel than network connection, in Network connection right click on Local Area connection and go to properties there you need to select internet protocol (tcp/ip) and than click on Properties Tab there you will find two options to select

1. Obtain the Ip address automatically
2. USe the following Ipaddress

You need to select Obtain the Ipaddress automatically and than Obtain the DNS server address automatically

Than click on Okay and it will enable you DHCP server,

Nov 10, 2009 | D-Link DSL-300T Modem

1 Answer

Cannont Access Modem


1. click START-settings-Controll Panel- Network Connections
2. right click on your LOCAL AREA CONNECTION and select PROPERTIES from the menu.
3.when properties opens, select TCP/IP by highliting it, then click on the properties .
4.once the new window opens titled "internet protocol (tcp/ip) Properties you will need to check the boxs that say "Obtain an IP adress automatically" and "Obtain DNS server automatically"
5. Click on OK
6.reboot
Hope this helps, post if you need further assistance.

Oct 05, 2008 | Efficient Networks SpeedStream 5100 Modem

1 Answer

No access to set up modem or router


you might have configured your lan settings wrongly.

If your modem was setup for DHCP then you configure your lan to receive IP address automatically, DNS automatically.

If DHCP is disabled on the modem, you have to USE static IP Address for your lan ip and default gateway should be your modem default ip.

the default IP for modem is usually 192.168.1.1
if DHCP is disabled on the modem the sys ip is 192.168.1.3

So Configure your LAN setting as follow and Type http://192.168.1.1 in the address url.

Lan Settings:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1

click ok.
and type the above url, press enter the modem will ask you for username and password.

Good Luck.

Dec 27, 2007 | D-Link DSL 300G+ (DSL-300G+) Modem

2 Answers

The routers I P address


set your ip setting to "Obtain an IP address automatically", then plug your ethernet cable to your system, once connected, open a command prompt then type 'ipconfig' (w/o ""). your IP add, subnet mask & default gateway will display. take note, the default gateway is the ip address of your router.

Dec 04, 2007 | Zoom X6 (5590) DSL Modem (55900003)

Not finding what you are looking for?
Modems Logo

Related Topics:

597 people viewed this question

Ask a Question

Usually answered in minutes!

Top Modems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you a Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...