Question about NetGear WGR614 Wireless Router

1 Answer

Installation problems I have a cd to install netgear onto my computer but my cd player doesnt work so it wont recognize the cd once I put it in so I have no idea how to get it installed

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 144 Answers

Hello!

-- who is your internet service provider
-- what is the operating system of your computer?
-- is this working fine before or is this a brand new router

i have read the same problem on the supportrix forum and you may try this and see if this help solve your problem. make sure your computer is directly connected to the router

Step 1: Shutdown the computer.
Step 2: reset the router while power on then Unplug the router’s power cable.
Step 3: Unplug the Broadband modem’s power cable and wait for 30 seconds.
Step 4: Plug in the Broadband modem’s power cable and wait for its lights to appear stable.
Step 5: Plug in the router's power cable once the modem’s lights appear stable.
Step 6: Power on the computer on and configure the router settings
Step 7: test the Internet connection.

if this still didnot work, upgrade the firmware of your router and repeat the same steps.

note:

configuring the router settings will depends who is your provider. if your isp is dsl you need to configure your ISP username (email address format) and password on the router. if your router is a cable no need to change any settings on the router. it should automatically work

Posted on Aug 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a netgear wna3100 wireless adapter and have been trying to install it. I have ran the netgear CD that came with the package, but once it gets to the stage of detecting adapter and I plug in the...


You can manually access the routher by typing 192.168.1.1 into the web browser once it has connected to the internet. You then can set up wireless access points and set a WEP, etc for security. This would also allow your adaptor to connect to the router once you have set everything up. The default username and pass for routers is usally: User: admin ...password: password


Please accept if this has helped you!

Mar 03, 2011 | Routers

1 Answer

INSTALL CD


No install CD needed with valid working internet with modem. First you need to turn off your computer then connect the working hsi modem to the Netgear router with the ethernet cord (looks like a thicker telephone wire) connect the ethernet cord from the back of the modem to the first single port on the Netgear not the ports labeled 1-4. Then with another ethernet cable snap one end into one of the 4 ports available and the other end snap into your computers ethernet port. Then unplug the MODEMs power cord for 30sec plug it back in wait for modem to boot back up with all of its lights and turn the computer back on. After install is finished you can now go and download your routers firmware from Netgear. In your address bar where it reads http://.........go ahead and highlight this and backspace it all until it clears to blank. Type in 192.168.1.1 and then hit enter. A window will pop up asking for username and password. For username type in "admin" for password type in "password" this is default and will always work unless someone has changed the username and password already on your home network, in which case contact netgear support. But if it does work the you will get Negear Smart Wizard. Here is where you can click on "Setup Wizard" and follow the prompts to download latest firmware and then Finished. Close down the netgear page and happy wireless internet surfing.

Apr 25, 2010 | NetGear WGR614 Wireless Router

1 Answer

Need specific instructions on how to install w/o


from router with ethernet to computer.....then open up your web browser and type in the address bar 192.168.0.1, a pop down login appears user/login= admin, and password- password. click okay. now you should be looking at the netgear config page. there is a button or tab you can click on that says wireless settings, so click it......first is the SSID which probably says wireless or netgear in it.....put in a name you will recognize when searching for your wireless connection......this is the Name of your wireless connection.... then scroll down to wep 64 bit encryption and select it. next, scroll down to key1 and type in a ten digit code (area code and phone number usually works great). leave the passphrase box above key 1 blank. once you have your code typed in scroll down to the bottom where it says apply and click the apply button. now , you need to double check that the netgear saved your new settings, so once the apply click refreshes the page scroll down and make sure its still there,,,,if not write down what the netgear replaced it with. once doublecheck is complete no need to apply again , just close your browser. then remove the ethernet cable, go down by the clock and right click your wireless network icon to view availbel wireless networks,,,, you then should be able to find Your SSID name and click it to then type the encryption in and now your surfing.

Dec 28, 2009 | NetGear RangeMax WPN824 Router

1 Answer

Need help to instal the wireless router WGR614V6...NETGEAR


GO TO CONTROL PANEL AND CLICK NETWORK CONNECTIONS.SEE IF YOU HAVE A LOCAL CONNECTION.IF NOT THEN HOPEFULLY YOU HAVE THE MOTHERBOARD DEVICE CD.THAT`S THE DISC THAT INSTALLS SOUND,NETWORK CONNECTION ETC.YOU WONT NEED A DISC THE ROUTER DISC IF YOU HAVE THAT. I HAVE A LINK SYSTEM AND NEVER EVER USED THE LINK SYSTEM DISC TO TO INSTALL IT.ONCE THE ROUTER IS PLUGGED IN,YOUR COMPUTER WILL DETECT IT.BUT TO BUILD A NETWORK CONNECTION BETWEEN IT AND THE COMPUTER YOU ARE GOING TO HAVE TO HAVE THE MOTHERBOARD DEVICE DISC.IF NOT WELL THEN YOU WILL HAVE TO BRING IT TO YOUR LOCAL COMPUTER TECH SHOP.JUST FOR THE HELL OF IT SHUT DOWN PC,O YEA THIS WILL ONLY WORK IF COMPUTER IS CUSTOM.OPEN PC[MAKE SURE PC IS OFF!] AND SEE IF THE MOTHERBOARD DISC IS TAPED TO THE BASE OF COMPUTER THAT IS IF YOU CANT FIND IT AND YOU PC WAS CUSTOM BUILT.....THEN YOU IN LUCK!

Nov 29, 2009 | NetGear WGR614 Wireless Router

1 Answer

Installation cd missing for wireless router


You do not need the disk

While it is powered up look for the reset button on the back and put a pencil or other non-metallic onto the button and hold it in for 10 seconds

It will reset and set the username to "admin" and the password to "password" or "admin"

If this does not work do not put in a username but enter "admin" for the password

You can then use the setup wizard to connect the internet broadband

Jan 17, 2009 | NetGear WIRELESS-G WGR614 802.11G WIRELESS...

1 Answer

The cd player doesnt work so i can't install the installation for wireless internet


you can access the router's setup page and setup your internet connection form there. follow the steps below

  1. Connect a computer to any one of the four LAN ports of the NETGEAR router.
  2. Open an Internet explorer and type the router IP address which would be either http://192.168.0.1 or http://192.168.1.1 (by default, refer to your product documentation ti determine the default IP address.) in the address bar and press Enter.
    The Login window will be prompting for a Username and Password. The default Username is admin and the default Password is password
  3. then setup your connection according to the settings provided by your ISP

Aug 05, 2008 | NetGear WGR614 Wireless Router

1 Answer

I lost the cd to set up one of my computers...


You do not need the installation CD to install the router. The CD is just a convenience item for computer novices. Netgear does supply SETUP documentation for many of its routers that take you through the manual installation of them.

For the WGR614 router, the manuals for the different versions can be found here:

http://kbserver.netgear.com/products/wgr614.asp

If you have problems or do not completely understand the installation process, please do not hesitate to ask here or e-mail me.

Jul 14, 2008 | NetGear WGR614 Wireless Router

1 Answer

Netgear wpn311 adapter


uninstalled the drivers from the computer.

unplug the adapter and restart the computer.

now install the driver which you download from the website.

i have send u the link where u can find the driver for this adapter that works with vista. use this driver.

http://kbserver.netgear.com/release_notes/d103109.asp

after installed the driver, restart the computer.

once the computer get restarted, plug in the adapter. and run the "new found hard ware wizard".

May 24, 2008 | NetGear RangeMax WPN824 Wireless Router...

1 Answer

Laptop won't recognize the network, No installation CD, other solutions?


This sounds like you have either WEP or WPA enable on the network you are trying to connect too. Are you connecting through a wireless network? If not try adding a passphrase using WPA-TKIP and see if that helps.

May 06, 2008 | NetGear WGR614 Wireless Router

1 Answer

Connection using D-link and Netgear WPN111


You have a router (Dlink) and an adapter (netgear)
What is your OS?
Does the computer recognize the adapter?
Once the adapter is properly installed, you should be able to just run the install CD and get online.
If you still have problems, be specific.

Jan 04, 2008 | D-Link DI 514 Wireless Router (DI-514)

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...