Question about MSI K7T Turbo2 Motherboard

2 Answers

MSI K7T Turbo2 No Manual

Hi have bought a secondhand pc with this motherboard and pulled out the 1000mg AMD and putting in an AMD 1800 but I have no manual. I do not know the settings/ jumpers about what to change and how much needs changing in the bios to get this to run properly.
I am running this with XP and 3x 256 sticks of 133 ram with a 64 mg graphics card it should run ok but does not identify the CPU properly stops with the CPU showing 1000mg not the 1800 I have.
Do you have any ideas please on how get this up and running?

Posted by on

  • obourlard Aug 09, 2008

    Bonjour,

    Je rencontre un problème avec une carte mère KT7 Turbo2 (MS-6330 V5.0):

    Avec un CPU DURON 1GHZ: OK (affichage 1000MHz

    Avec un CPU ATHLON 1600 ou 1700:: à la mise sous tension: affichage 1050MHz??

    Avez-vous une solution?

    Je serais intéressé par la doc (strapping) de cette carte mère)

    Merci beaucoup, Olivier

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Bonjour à tous,

With your help, i found manual and fixed Athlon 1600 detection problem on K7T Turbo2 motherboard.
After setting J17 to "open" (FSB=133MHz), CPU speed is now good, and the motherboard run fine.

Un grand merci,

Olivier

Posted on Aug 12, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Hi, click on this MSI link which will open to the motherboard
K7T Turbo 2 (MS-6330 v5.0). Links for, Bios download, user manual & FAQ is listed at the top of the page in the blue in colored bar. http://www.msicomputer.com/product/detail_spec/K7Tturbo2.htm
You can run up to 1800 but it must be the AMD Athlon XP (Palomino, Socket A) up to 1800+

Posted on Aug 06, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BIOS IS DAMAGE;HOW TO RESET?



Restart your computer
During the boot process you will see on the screen to press a certain key to enter setup
Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart or

http://download.cnet.com/msi-kt4v-bios-windows/3000-2098_4-10162333.html
Update BIOS in your MSI KT4V motherboard for Windows 95/98/Me/NT/2000/XP.
or
Update BIOS in your MSI K7T Turbo2 motherboard for Windows 95/98/Me/NT/2000/XP.

http://download.cnet.com/msi-k7t-turbo2-bios/3000-2098_4-10162343.html

http://download.cnet.com/msi-kt3-ultra2-bios/3000-2098_4-10162341.html
hope this helps

Jul 23, 2011 | MSI NF750-G55 Motherboard

1 Answer

I need user guide or service manual for motherboard MSI K7TB Turbo2


try visit this page:
http://www.msi.com/service/download/manual-3886.html

just choose your region then it will automatically downloaded.
after finished download just launch and extract the file.

hope this useful

Feb 18, 2011 | MSI K7T Turbo2 Motherboard

2 Answers

What motherboard will replace a msi k7t turbo2?


This is an obsolete part; as such, you will have a hard time finding it at any retailer, whether brick and mortar or online. However, all hope is not lost-try E-bay

http://computers.shop.ebay.com/i.html?_nkw=socket+a&_sacat=1244&_trksid=m270&_dmpt=Motherboards&_odkw=&_osacat=1244

You will have to look for a board that supports S-Dram memory, because that is what your MSI K7T Turbo2 uses.

My advice would be to skip this entirely; I would replace the whole board/CPU setup, and pick up some memory. You can get an Athlon II quad core and mobo for $165.98 USD (Asus /AMD). Pick up 2 GB of Kingston DDR3 RAM for $56

http://www.newegg.com/Product/Product.aspx?Item=N82E16820134790

and you essentially have a whole new system for $222

Just my opinion on this-I don't think that spending the amount of cash you would have to in order to replace an obsolete board is worth it.

You might try this, instead:
AMD Athlon II x2 Regor (2.8 Ghz, dual core) @ 56.99

http://www.newegg.com/Product/Product.aspx?Item=N82E16819103688

ASRock M3A770DE AM3 AMD 770 ATX AMD mobo @ 59.99

http://www.newegg.com/Product/Product.aspx?Item=N82E16820148305

Total $174.97 + shipping USD

Given you 3 ways to go and my advice-good luck!!

http://www.newegg.com/Product/Product.aspx?Item=N82E16813157176

Crucial 2 GB Ballistix 240 pin DDR3 1600 Memory for $57.99

Feb 03, 2010 | MSI K7T Turbo2 Motherboard

1 Answer

Where can i get the drivers 4 my k7t turbo2


Take this link to MSI website and follow the instructions to get your free download.

http://www.msi.com/index.php?func=downloadindex

Oct 08, 2009 | MSI K7T Turbo2 Motherboard

1 Answer

Lost bios password


short the pins of BIOS start the machine then again start the machine in normal mode.

Jun 14, 2009 | MSI K7T Turbo2 Motherboard

1 Answer

I had a old pc i change de board but didnt finish plugging all the wiring .now i cant remenber where the small wire for the cd where it s goes on the board


Hi there.
I have no idea why manufacturers still put these leads in the boards because they really don't serve much purpose.
I would leave it out, but if you want to plug it in look close at the motherboard near the I/O cover (rear USB's) for a black socket with 4 pins, it should be marked CD1, that's where the lead goes.


Good luck

Jun 10, 2009 | MSI K7T Turbo2 Motherboard

1 Answer

Turn on issues


take all accessories off the motherboad (network card, memories, etc) connect just the monitor, keyboard, and mouse. it fires up. then insert one accessory at atime and see what is keep it off. then replace it.

Oct 13, 2008 | MSI K7T Turbo2 Motherboard

2 Answers

How to set my fsb at 166


what ur mother full model number or name?

Nov 18, 2007 | MSI K7T Turbo2 Motherboard

1 Answer

Never saw this B4.......


it sounds like the ram is acting up. easiest solution is to remove the ram make sure no dust and crap has built up on the ram and the ram sockets.

Jun 09, 2007 | MSI K7T Turbo2 Motherboard

Not finding what you are looking for?
MSI K7T Turbo2 Motherboard Logo

Related Topics:

2,182 people viewed this question

Ask a Question

Usually answered in minutes!

Top MSI Computers & Internet Experts

David
David

Level 3 Expert

778 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Terry Hair

Level 3 Expert

4125 Answers

Are you a MSI Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...