Question about Connex 3300 240-Channels Base CB Radio

1 Answer

Have a new connex 3300hp i can hear everybody else but nobody can hear me when i key up and talk the needle dont even move

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 24 Answers

Look up the tune specs VR13 (L PWR) L32 L33 high power maybe your watts are turned down if it is brand new send it back to the place you bought it from.If the watts are turned all the way down you won't get any carrier your needle is not moving when tranmitting there is no rf power check to see if your tx light is on when depressing the mic button. you should have a rf adjustment turn it clockwise to turn the power up on the front of your radio.or the mods i gave you in the radio.

Posted on Apr 06, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the connex 3300hp have talk back


Any radio can have Talk Back.. all it is is leaving the RX active on TX and the sampled audio goes to the speaker that you can hear....

Feb 17, 2014 | Connex 3300 240-Channels Base CB Radio

1 Answer

Hooked up my connex 3300hp backwards


this usually just blows the fuse, check/replace and try again, if it pops the fuse, the protection diode has shorted and the radio needs to be serviced

Feb 08, 2014 | Connex Radio Communications

1 Answer

Got a connex 3300HP has a ranger board and chipset won't modulate recieves fine keys up relay clicks needle doesn't move no voice either cant find schematics


You may have a dead meter.
Modulation is audio's affect on swing wattage or pep. Notice that needle moving more with your voice.
Dead key or carrier wattage is without your voice enhancing the power only with mic keyed.
I can only assume that the chipset you are referring to is an ic chip audio or pll which must be working if you are receiving audio.
Check your mic cord................ transmit and modulation and even your receive volume can be affected by the cord/mic plug solder joints or broken wires here.
http://www.cbtricks.com/radios/galaxy/dx33hp2/graphics/dx_33hp2_sch.pdf this is a similar radio the General Lee, Connex 3300hp and Galaxy hp2 share boards i believe dont hold me to that thou.


Aug 20, 2011 | Connex 3300 240-Channels Base CB Radio

1 Answer

Have a connex 3300hp and i dont know where the dials should be can you help?


If you're wanting to talk on your basic 40 channel then a/d and on high band. Always keep your mic gain and rf gain to the right echo I like both around 10 o'clock. nbl at the top.talk back is up to you if you want to hear yourself and run it on high power unless you're running a power box then switch to low power.

Apr 20, 2010 | Connex 3300 240-Channels Base CB Radio

1 Answer

Problems with adio not loud enough nobody hears no power


Does the needle move when you key? Is the MIC gain all the way to the right? I pose these as questions because there was not enough info....

Feb 15, 2010 | Connex CX-4300HP CB Radio

1 Answer

My connex 3300hp just stopped transmitting. why? it has power and i hear myself from the speaker, though no one else can hear me.


The RF final output transistor(s) is probably blown. They are not very difficult to replace if know your way around with a soldering iron.

Oct 09, 2009 | Connex 3300 240-Channels Base CB Radio

1 Answer

Connex 3300hp


Poor ground shield, or poor solder joint in mic cable.

Oct 07, 2008 | Connex 3300 240-Channels Base CB Radio

1 Answer

Manual for Connex 3300 HP


The best place for anything related to cb radios and ham radios is www.cbtricks.com.

Here is a direct link to the owner's manual for a Connex 3300hp

http://www.cbtricks.com/radios/connex/cx_3300_cx_3300hp/graphics/connex_cx3300_cx3300hp_om.pdf


Dean Pitts
Rollin CBs

Aug 26, 2008 | Connex 3300 240-Channels Base CB Radio

2 Answers

Switching radio bands


what radio do you have? does it even have sideband channels? some radios don't come with them, of fm or upper or lower side bands and short wave

Dec 08, 2007 | Connex 3300 240-Channels Base CB Radio

Not finding what you are looking for?
Connex 3300 240-Channels Base CB Radio Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Connex Radio Communications Experts

AnyMHz.com
AnyMHz.com

Level 2 Expert

500 Answers

Steve

Level 3 Expert

3287 Answers

Mitch Davis
Mitch Davis

Level 2 Expert

95 Answers

Are you a Connex Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...