Question about Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

Vizio TV P50HDTV10A had screen flashing static. Had vizio support try and fix HD repair contractor sent out said I needed y & z sus boards, so they put those in then the screen had a Soild White band down the middle of the screen like where it would say no Signal but scrolling up or down so fast looked just like a solid band, would change to green band on right side when you push Input. Now they tried the Controller small board in middle under Big Main Board in Middle. Still not fixed now that they have taken my money and don't want to try anymore boards they are saying its the panel. I don't believe it? ANyone have any ideas

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Vizio Master
  • 8,457 Answers

Tell them put all ur old boards back and change the Big Main board that in the middle.

Posted on Mar 31, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

50" Vizio sound but no picture


those plasma hove a lot of problems with the y-sus board signal board take you meter check cops ics. was it flashing black and white before you replaced the boards

Feb 19, 2012 | Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

I have a 50" vizio


inverter board is not working, check dry soldering, bad capacitor or fuse

Aug 24, 2011 | Vizio P50HDTV10A 50 in. Plasma HDTV

2 Answers

No picture no sound just replaced the power supply and still nothing is it the main board


no if the tv turns on with the remote or power switch that means you have the 5 volt standby for the main board there could be two other reason why you dont have a picture or sound the y-sustain board buffers or logic board you will need a tech to see which on of these boards are out 9 out of 10 its usually the y-sustain board with the vizio

Jan 27, 2011 | Vizio P50HDTV20A 50 in. Plasma HDTV

1 Answer

I HAVE A VIZIO PLASMA P-50HDM HOW IS 5YEARS , AND COMPLETLY LOST THE PICTURE AFTER A SERIE OF LOUD ''POP'' ,I OPEN THE BACK AND WHEN POWERD COULD SEE NOISE AND FLASH COMING FROM THE Z-SUS BOARD . I LIKE TO...


The Z-SUS board... LG panel I assume? Not your most typical failure, but certainly not unheard of. You should remove the panel connections for the Z-SUS and inspect along the edge of the panel for burns or signs of smoke with a flash light. If you can not get a clear view, it may be necessary to unscrew the panel and carefully lift the edge a little. You want to inspect the point at which the ribbons enter the panel. If you do not see any black smoky marks, you may be safe with a Z-SUS replacement.

Mar 14, 2010 | Vizio P50HDTV10A 50 in. Plasma HDTV

4 Answers

My vizio 50 inch plasma tv will not turn on. what


Tries unplug,replug about an hour,see if it reset itself.Not than must replaced the signal tuner board.Plasma have this problems alot.

Jan 08, 2010 | Vizio P50HDTV10A 50 in. Plasma HDTV

5 Answers

50" Plasma Vizio P50HDTV10A - no video - just flashing B & W


Don't replace anything, Vizio has issued a lifetime warranty for this set because of this problem. No joke, call the customer service line and tell them you got the pop of death. They'll send someone out to 'repair' the set free of charge. If they can't fix it they'll give you a new one. Even if your mfg purchase warranty has expired. Call them and post the results. I've been fixing TV's longer than I care to admit and this is the first time I've actually seen a company stand behind their products like this. I bought a broken tv with the intent of fixing it and after replacing almost every board I could only manage to get the vertical racing stripe line, except mine was purple. I put it all back together and called to find out if there was a recall on this set and within 5 minutes the (Actual English speaking) gentleman told me to sit tight and he'd have a repairman come and do his thing. He did, and long story short, he couldn't fix it. Last week they delivered a new TV to replace this one. I was shocked. I think Vizio will have all my future business.
Good luck.

Mar 17, 2009 | Vizio P50HDTV10A 50 in. Plasma HDTV

Not finding what you are looking for?
Vizio P50HDTV10A 50 in. Plasma HDTV Logo

502 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...