Question about Alesis RA-150 Amplifier

1 Answer

Hi there, I have an ALESIS RA300 AMP that has been diagnosed as having a totally corroded main power board? The electrician has been having trouble locating one to replace the old one, so I thought I would contact you guys and see if anyone can help me with what this part actually is and who I can order one from? I have absolutely NO idea about the internal organs of things with buttons and knobs and bright little lights.... : ) tnx, Cristina.

Posted by on

  • 2 more comments 
  • cristars Mar 31, 2011

    Hola,
    Thank you for the link, I do appreciate that, tho as I mentioned I have no idea what it is I am looking at... could be a UFO landing strip for all I know? Anyhoo, I would still like to know the name of the thing I need to order, so that I can give it to the electrician and he can have fun with the manual and fix my much loved and sorely missed AMP. Any more suggestions?

  • cristars Mar 31, 2011

    Oh, I see, that makes sense, and then he can tell me exactly what the part is and I can order it? I thought that when he said 'main power board' he was already identifying what the part is? Thank you, I shall see what he says.
    Hopefully then I can give a clearer part description and you shall be able to guide me in where to get it?
    Cheers, Cristina

  • cristars Mar 31, 2011

    Oh, yes I have contacted Alesis and do hope to hear from them as well.

    Muchas gracias : )

  • cristars Mar 31, 2011

    Oh cool, thank you!

    You have a great day too!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,098 Answers

Hi Cristina,
You may download the service manual of your unit at this LINK.

Posted on Mar 31, 2011

  • 4 more comments 
  • Jdvillanueva
    Jdvillanueva Mar 31, 2011
  • Jdvillanueva
    Jdvillanueva Mar 31, 2011

    You may also contact Alesis.com for your concern...

  • Jdvillanueva
    Jdvillanueva Mar 31, 2011

    Give the copy of the schematic diagram to your technician, he will identify the corroded part with this manual...

  • Jdvillanueva
    Jdvillanueva Mar 31, 2011

    value and part no. are listed there....

  • Jdvillanueva
    Jdvillanueva Mar 31, 2011

    Have a nice day!

  • Jdvillanueva
    Jdvillanueva Mar 31, 2011

    :-)

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello. RA300 used only in a studio environment, never pushed hard. During a mastering project we lost one side of the amp. Thanks!


The first things to check are the devices on the heatsink. They do all the work so tend to go when pushed! Remember stereo amps are just two amps put together, so at least you have a good channel (which is the same as the bad one) to do tests with say an ohmeter.

Apr 27, 2011 | Alesis RA-150 Amplifier

1 Answer

I have an elesis RA 500 it blows the slow blow fuse when i plug it in .any ideas what is wrong?


hi there,
it sounds like the internal transformer has gone.
It's not user replaceable and will require you to take to an electronics store to be repaired.

SAME THING RECENTLY HAPPEN WITH ONE OF MY BITS OF KIT ...... for heavens sake don't just keep changing the fuse time and time again.

Jan 07, 2011 | Alesis RA300 Amplifier

3 Answers

Alesis RA 500 makes a "clicking" sound and no more sound. later it will "click" on again


Clicking sound is a protection relay. This means one of the power amp sections have failed. Or that your speakers connections are faulty

Sep 24, 2010 | Alesis RA300 Amplifier

1 Answer

Took my RA300 and Tannoy Reveal X speakers to a cellar party for halloween. No drinks were spilled or anything but it had an ipod plugged into it most of the night and the volume on the amp turned to max,...


Normally when people bring their HI-FI to a party they tend to fix up the leads to the speakers in a flimsy manner ( as it is only temp) . With the crowd mulling around these leads(wires) could very well come loose or even short out. This leads to your Final Drive ( Output Amp) to short out. It is not an expensive repair. Check your final amp & replace any shorted/blown items. To get full satisfaction the job best be handled by the local agents of the amp.

Nov 19, 2009 | Alesis RA-150 Amplifier

1 Answer

Amp not powering up


Chek transfomer with a multi meter set on continuity,check primary input across wires AMPLIFIER MUST NOT BE PLUGGED INTO WALL SOCKET...check outputs low readings in ohms are good no readings mean open transformer(buggered

I suspect outpuit stage short as this probably buggered relay in first place

Jan 07, 2009 | Alesis RA-150 Amplifier

1 Answer

Need a M1Active MKII diagram


Hi, You will need to contact Alesis direct and they will decide whether to email you a copy of the schematics, as they are copyrighted, etc.

Dec 15, 2008 | Alesis M1-Active MkII Main / Stereo...

2 Answers

Alesis M1-Active left speaker emitts a very high pitched wine that sounds like feedback


have your built-in amp checked for trouble. there should be trouble in the output stage feedback loop. this is something to be done by a repair technician

Apr 11, 2008 | Alesis M1-Active MkII Main / Stereo...

1 Answer

Alesis Monitor Problem


Hi Mate, Im no electrician so Im not 100%, basically I think it would last but it wouldnt be a long term fix as it really needs to be 105c.

Cheers

Mar 28, 2008 | Alesis M1-Active MkII Main / Stereo...

22 Answers

Amp cuts out after a while


My Alesis SA-300 started the cutting out when at moderate levels some months ago... Well, Radio Shack has instant gratificaion for those who have one in the neighborhood. Part number 275-249 will do the trick!
http://www.radioshack.com/product/index.jsp?productId=2062483

I replaced the Dong Woo part with the Radio Shack item and the amp is back to its old self... maybe even a little better. Loud, clean and steady.

Thanks to all you who have contributed to this thread.

Steve

Oct 17, 2007 | Alesis RA-150 Amplifier

Not finding what you are looking for?
Alesis RA-150 Amplifier Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alesis Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5056 Answers

shaqsatin

Level 1 Expert

18 Answers

Ben Armstrong

Level 2 Expert

334 Answers

Are you an Alesis Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...